Ampere to Biot
A
Bi
Conversion History
| Conversion | Reuse | Delete |
|---|---|---|
| No conversion history to show. | ||
Quick Reference Table (Ampere to Biot)
| Ampere (A) | Biot (Bi) |
|---|---|
| 0.5 | 0.05 |
| 1 | 0.1 |
| 5 | 0.5 |
| 10 | 1 |
| 13 | 1.3 |
| 20 | 2 |
| 32 | 3.2 |
| 100 | 10 |
About Ampere (A)
The ampere (A) is the SI base unit of electric current, one of the seven fundamental units in the International System. Since the 2019 SI redefinition, one ampere is exactly the flow of 1/1.602176634×10⁻¹⁹ elementary charges per second, fixing the elementary charge precisely. In practice, a 100 W bulb at 240 V draws about 0.4 A; a domestic kettle draws 8–13 A; household ring circuits are protected at 20–32 A; car starter motors demand brief surges of 100–200 A. The ampere defines related units: one volt across one ohm yields one ampere (Ohm s law), and one ampere for one second transfers one coulomb of charge.
A smartphone fast charger delivers 2–5 A. A household circuit breaker protects wiring rated at 10–32 A.
Etymology: Named after André-Marie Ampère (1775–1836), French physicist and mathematician who formulated Ampère s circuital law relating magnetic fields to the electric currents that produce them. The ampere was adopted as a practical electrical unit at the International Electrical Congress in 1881.
About Biot (Bi)
The biot (Bi) equals exactly 10 amperes and is the base unit of electric current in the centimeter-gram-second electromagnetic (CGS-EMU) system. It is defined as the current in a pair of parallel conductors 1 cm apart that produces a force of 2 dynes per centimeter length — the CGS-EMU analogue of the SI ampere definition. In the CGS-EMU system the biot plays the same foundational role the ampere plays in SI: all other electromagnetic CGS-EMU units are derived from it. The biot is essentially obsolete in modern practice, but it appears in older physics literature and classical electrodynamics textbooks alongside the dyne, gauss, and oersted.
A current of 1 Bi equals 10 A — roughly the draw of a domestic electric kettle. References to the biot appear primarily in historical or theoretical contexts, not modern instrumentation.
Etymology: Named after Jean-Baptiste Biot (1774–1862), French physicist who, with Félix Savart, established the Biot–Savart law describing the magnetic field generated by a steady electric current.
Ampere – Frequently Asked Questions
Why was the ampere redefined in 2019?
The old definition relied on a thought experiment — infinite parallel wires 1 meter apart — that was impossible to realize exactly in a lab. The 2019 redefinition fixed the elementary charge at exactly 1.602176634×10⁻¹⁹ coulombs, linking the ampere to a countable number of electrons per second and enabling more precise quantum-based measurements.
How many amps does a house use at peak?
A typical US home has a 200-amp service panel. Peak usage — oven, dryer, AC, and water heater all running — might hit 80–150 A across all circuits combined. The 200 A main breaker protects the service entrance cable. European homes typically have 32–63 A single-phase service at 230 V, delivering equivalent power.
Why do electricians say "it is the amps that kill you, not the volts"?
Current through the heart causes fibrillation and death — as little as 0.1 A at 50/60 Hz. But voltage drives that current through your body's resistance (~1,000–100,000 ohms depending on conditions). So you need enough voltage to push lethal current through skin resistance. Both matter; the saying is a simplification.
What happens inside a circuit breaker the instant current exceeds its rating?
A thermal-magnetic breaker has two trip mechanisms. For sustained overloads (e.g., 20 A on a 15 A breaker), a bimetallic strip slowly heats and bends until it releases the latch — taking seconds to minutes depending on the overload. For short circuits (hundreds of amps), an electromagnet yanks the latch open in milliseconds. The contacts separate and an arc forms; arc chutes — stacked steel plates — split the arc into segments, cool it, and extinguish it within one AC cycle (16–20 ms). Modern breakers can interrupt 10,000–65,000 A fault currents.
How does a clamp meter measure amps without touching the wire?
A clamp meter wraps a magnetic core around a current-carrying conductor. AC current creates an alternating magnetic field that induces a proportional voltage in the clamp's pickup coil. Hall-effect clamp meters can also measure DC. No electrical contact needed — you just close the jaws around the insulated wire.
Biot – Frequently Asked Questions
Why is the biot exactly 10 amperes and not some other factor?
The CGS-EMU system defines its base units using centimeters, grams, and seconds instead of meters, kilograms, and seconds. The factor of 10 falls out naturally from the dimensional conversion: 1 Bi produces 2 dyn/cm force between wires 1 cm apart, and working through the CGS-to-SI conversion yields exactly 10 A.
Who was Jean-Baptiste Biot and why does he have a current unit?
Biot was a French physicist (1774–1862) who co-discovered the Biot–Savart law in 1820, describing how electric current generates a magnetic field in space. This was one of the foundational results linking electricity to magnetism. The CGS community honored him by naming their electromagnetic current unit after him.
Does anyone still use the biot in modern physics?
Essentially no. Even theorists who prefer CGS units typically use Gaussian units rather than pure CGS-EMU. The biot appears mainly in textbook conversion tables, historical physics papers, and graduate-level electrodynamics courses that teach multiple unit systems for pedagogical reasons.
How do I convert between biots and amperes?
Multiply biots by 10 to get amperes; divide amperes by 10 to get biots. A 30 A circuit carries 3 Bi; a 0.5 Bi current is 5 A. It is one of the simplest unit conversions in physics — just move the decimal point one place.
What is the Biot-Savart law and how does it relate to the biot unit?
The Biot-Savart law calculates the magnetic field produced by a small segment of current-carrying wire at any point in space. In CGS-EMU, it uses biots for current and gauss for the field. In SI it uses amperes and teslas. The law itself is fundamental — it is used to design MRI magnets, motors, and particle accelerators.