Ampere to Milliampere
A
mA
Conversion History
| Conversion | Reuse | Delete |
|---|---|---|
| No conversion history to show. | ||
Quick Reference Table (Ampere to Milliampere)
| Ampere (A) | Milliampere (mA) |
|---|---|
| 0.5 | 500 |
| 1 | 1,000 |
| 5 | 5,000 |
| 10 | 10,000 |
| 13 | 13,000 |
| 20 | 20,000 |
| 32 | 32,000 |
| 100 | 100,000 |
About Ampere (A)
The ampere (A) is the SI base unit of electric current, one of the seven fundamental units in the International System. Since the 2019 SI redefinition, one ampere is exactly the flow of 1/1.602176634×10⁻¹⁹ elementary charges per second, fixing the elementary charge precisely. In practice, a 100 W bulb at 240 V draws about 0.4 A; a domestic kettle draws 8–13 A; household ring circuits are protected at 20–32 A; car starter motors demand brief surges of 100–200 A. The ampere defines related units: one volt across one ohm yields one ampere (Ohm s law), and one ampere for one second transfers one coulomb of charge.
A smartphone fast charger delivers 2–5 A. A household circuit breaker protects wiring rated at 10–32 A.
Etymology: Named after André-Marie Ampère (1775–1836), French physicist and mathematician who formulated Ampère s circuital law relating magnetic fields to the electric currents that produce them. The ampere was adopted as a practical electrical unit at the International Electrical Congress in 1881.
About Milliampere (mA)
The milliampere (mA) equals one thousandth of an ampere (10⁻³ A) and is the practical unit for most consumer electronics and lighting circuits. USB 2.0 ports supply up to 500 mA; USB-C Power Delivery can reach 5,000 mA (5 A). A standard 5 mm indicator LED operates at 10–20 mA; mid-power LED drivers supply 100–350 mA. Human perception of electric shock begins near 1 mA; currents above 10 mA cause involuntary muscle contraction, and above 100 mA can be lethal. Wireless sensors, earphones, and small motors typically draw single-digit to low-hundreds of milliamperes.
A USB 2.0 port provides up to 500 mA for charging. A standard 5 mm indicator LED operates at around 20 mA.
Ampere – Frequently Asked Questions
Why was the ampere redefined in 2019?
The old definition relied on a thought experiment — infinite parallel wires 1 meter apart — that was impossible to realize exactly in a lab. The 2019 redefinition fixed the elementary charge at exactly 1.602176634×10⁻¹⁹ coulombs, linking the ampere to a countable number of electrons per second and enabling more precise quantum-based measurements.
How many amps does a house use at peak?
A typical US home has a 200-amp service panel. Peak usage — oven, dryer, AC, and water heater all running — might hit 80–150 A across all circuits combined. The 200 A main breaker protects the service entrance cable. European homes typically have 32–63 A single-phase service at 230 V, delivering equivalent power.
Why do electricians say "it is the amps that kill you, not the volts"?
Current through the heart causes fibrillation and death — as little as 0.1 A at 50/60 Hz. But voltage drives that current through your body's resistance (~1,000–100,000 ohms depending on conditions). So you need enough voltage to push lethal current through skin resistance. Both matter; the saying is a simplification.
What happens inside a circuit breaker the instant current exceeds its rating?
A thermal-magnetic breaker has two trip mechanisms. For sustained overloads (e.g., 20 A on a 15 A breaker), a bimetallic strip slowly heats and bends until it releases the latch — taking seconds to minutes depending on the overload. For short circuits (hundreds of amps), an electromagnet yanks the latch open in milliseconds. The contacts separate and an arc forms; arc chutes — stacked steel plates — split the arc into segments, cool it, and extinguish it within one AC cycle (16–20 ms). Modern breakers can interrupt 10,000–65,000 A fault currents.
How does a clamp meter measure amps without touching the wire?
A clamp meter wraps a magnetic core around a current-carrying conductor. AC current creates an alternating magnetic field that induces a proportional voltage in the clamp's pickup coil. Hall-effect clamp meters can also measure DC. No electrical contact needed — you just close the jaws around the insulated wire.
Milliampere – Frequently Asked Questions
How many milliamps is dangerous to a human?
The danger thresholds for 50/60 Hz AC are roughly: 1 mA (tingling), 10–20 mA (muscle lock — you cannot let go), 75–100 mA (ventricular fibrillation), and 200+ mA (cardiac arrest and burns). DC is somewhat less dangerous at the same current. Duration matters enormously — 100 mA for 1 second is more lethal than 100 mA for 10 ms.
Why is my phone charger rated in milliamps when it charges at 2 amps?
Battery capacity is rated in milliampere-hours (mAh), not milliamps. A 4,000 mAh battery holds 4,000 mA for one hour (or 2,000 mA for two hours). The charger delivers 2 A (2,000 mA) of current, and it takes about 2 hours to fill that 4,000 mAh battery from empty.
What is the milliamp draw of common household items?
A wireless earbud draws 5–15 mA during playback. A TV remote uses about 10 mA when pressing a button. An LED nightlight consumes 20–50 mA. A smoke detector in standby draws 10–30 μA (0.01–0.03 mA) — so low it runs on a 9V battery for years.
Why do LED specifications always mention 20 mA?
Standard 5 mm indicator LEDs were designed around a 20 mA operating point — bright enough to see clearly, low enough to avoid overheating the tiny die. All datasheet specs (luminous intensity, color, forward voltage) are measured at this "test current." High-power LEDs use 350 mA or 700 mA as their reference instead.
How does milliamp-hour (mAh) relate to milliamp (mA)?
Milliamp-hours measure charge capacity; milliamps measure current flow rate. A 2,000 mAh battery can deliver 2,000 mA for 1 hour, or 200 mA for 10 hours, or 20 mA for 100 hours — current times time equals capacity. Dividing mAh by mA gives approximate runtime in hours.