CGS e.m. unit to Franklin second

The CGS e.m. unit of current (10 A) was inconveniently large for everyday lab work, while the CGS e.m. unit of resistance (the abohm, 10⁻⁹ Ω) was absurdly small. Physicists created "practical" units — the ampere, volt, and ohm — as decimal multiples that gave human-scale numbers. The ampere was set at 0.1 abampere. These practical units eventually became SI, while the "absolute" CGS units became historical footnotes.

In the 19th century, electricity and magnetism were treated as partially separate phenomena, leading to separate "natural" unit choices. The EMU system normalized magnetic permeability to 1; the ESU system normalized electric permittivity to 1; the Gaussian system mixed both. Once Maxwell unified electromagnetism, this fragmentation became unnecessary — but the systems persisted in literature for a century.

They introduced "practical" units — the ampere, volt, and ohm — as decimal multiples of CGS-EMU quantities. The ampere was defined as 0.1 abampere (CGS e.m. unit). This practical system eventually became SI, while the "absolute" CGS units faded. The factor of 10 was chosen for human-scale convenience.

The gauss (magnetic flux density, = 10⁻⁴ tesla) remains surprisingly common — refrigerator magnets are rated in gauss, and MRI field strengths are often quoted in both tesla and gauss. The oersted (magnetic field strength) appears in materials science. These CGS-EMU holdouts persist because their numerical values are more convenient for everyday magnets.

The SI was officially adopted in 1960, but the transition took decades. Most physics journals required SI by the 1970s, though astrophysics and plasma physics held onto Gaussian CGS into the 2000s. Some subfields never fully switched — you can still find new papers using gauss and oersted alongside tesla and A/m.

Franklin (1706–1790) was the American polymath who proved lightning is electrical with his famous kite experiment in 1752. He introduced the convention of "positive" and "negative" charge that we still use today. He arbitrarily assigned positive to the charge on glass rubbed with silk — which turned out to be a deficit of electrons, giving us the unfortunate convention that current flows opposite to electron motion.

The roentgen (R) was defined in 1928 as the radiation exposure producing 1 ESU of charge (1 franklin ≈ 3.336 × 10⁻¹⁰ C) per cm³ of dry air at STP. This CGS-era definition stuck because radiation safety regulations were already built around it. Even though the SI gray replaced the roentgen for dosimetry, the roentgen — and its franklin-based definition — persists in US regulatory and medical imaging contexts.

The legacy unit of radiation exposure, the roentgen (R), is defined as the amount of X-ray or gamma radiation that produces 1 esu of charge (1 franklin) per cubic centimeter of dry air at STP. This definition dates from the 1920s when CGS-ESU was standard. Modern dosimetry uses grays and sieverts, but the roentgen and its franklin-based definition persist in some medical and regulatory contexts.

One Fr/s is about 0.33 nanoamperes — less current than a sleeping microcontroller draws. To equal the 1 A flowing through a phone charger cable, you would need about 3 billion franklins per second. The unit is spectacularly impractical for anything beyond electrostatics calculations.

Sort of. He labelled the charge on glass rubbed with silk as "positive," not knowing it was caused by removing electrons. When Thomson discovered the electron in 1897, it turned out electrons carry what Franklin called negative charge. So conventional current flows from + to −, opposite to actual electron flow. Engineers and physicists have lived with this "mistake" for over 250 years.