EMU of current to Milliampere
EMU
mA
Conversion History
| Conversion | Reuse | Delete |
|---|---|---|
1 EMU (EMU of current) → 10000 mA (Milliampere) Just now |
Quick Reference Table (EMU of current to Milliampere)
| EMU of current (EMU) | Milliampere (mA) |
|---|---|
| 0.1 | 1,000 |
| 0.5 | 5,000 |
| 1 | 10,000 |
| 5 | 50,000 |
| 10 | 100,000 |
| 30 | 300,000 |
| 100 | 1,000,000 |
About EMU of current (EMU)
The electromagnetic unit (EMU) of current equals exactly 10 amperes, numerically identical to the biot. It is the current unit native to the CGS electromagnetic (CGS-EMU) system, which dominated electrical physics from the mid-19th century until SI adoption in 1960. In CGS-EMU, the permeability of free space is defined as 1, giving the electromagnetic subsystem its characteristic form where magnetic force between parallel currents is expressed purely in dynes. The EMU of current appears in classical electrodynamics texts, historical measurement standards, and theoretical physics work using CGS-EMU conventions. All practical electrical measurement now uses SI amperes.
1 EMU of current = 10 A. A 50 A arc welding process carries 5 EMU. The unit is encountered primarily in pre-1960 scientific literature.
About Milliampere (mA)
The milliampere (mA) equals one thousandth of an ampere (10⁻³ A) and is the practical unit for most consumer electronics and lighting circuits. USB 2.0 ports supply up to 500 mA; USB-C Power Delivery can reach 5,000 mA (5 A). A standard 5 mm indicator LED operates at 10–20 mA; mid-power LED drivers supply 100–350 mA. Human perception of electric shock begins near 1 mA; currents above 10 mA cause involuntary muscle contraction, and above 100 mA can be lethal. Wireless sensors, earphones, and small motors typically draw single-digit to low-hundreds of milliamperes.
A USB 2.0 port provides up to 500 mA for charging. A standard 5 mm indicator LED operates at around 20 mA.
EMU of current – Frequently Asked Questions
What does EMU stand for and why was it created?
EMU stands for "electromagnetic unit." In the 1860s–1870s, physicists needed separate unit systems for electrostatic and electromagnetic phenomena because they had not yet unified them. The EMU system was built around magnetic force between currents, while the ESU system was built around Coulomb's electrostatic force. The ratio between them turned out to be the speed of light — a clue that led to Maxwell's equations.
Is the EMU of current the same as a biot?
Yes, exactly. Both equal 10 amperes. The biot is the named unit; "EMU of current" is the generic label. It is like saying "SI unit of force" versus "newton" — same thing, different label. The CGS-EMU system also has named units for other quantities: the gauss (magnetic field), the oersted (magnetising field), and the maxwell (magnetic flux).
Why did physics abandon the EMU system?
The EMU system was awkward for practical electrical engineering — 1 EMU of resistance (the abohm) equals 10⁻⁹ ohms, making everyday values absurdly large numbers. The SI system, adopted in 1960, unified mechanical and electrical units into one coherent framework with human-scale values. Practicality won over tradition.
Where might I encounter EMU of current in old scientific papers?
Pre-1960 physics journals, particularly in geomagnetism, plasma physics, and early electrical standards work, routinely use EMU. Geophysicists measuring Earth's magnetic field historically reported results in CGS-EMU units (gauss, oersted, EMU). Some geophysics reference data still has not been converted to SI.
How did the speed of light connect the EMU and ESU systems?
Weber and Kohlrausch discovered in 1856 that the ratio of the ESU to EMU charge was approximately 3×10¹⁰ cm/s — the speed of light. This was no coincidence: Maxwell showed that light is an electromagnetic wave, and the unit ratio reflects the fundamental coupling between electric and magnetic fields. One of the greatest insights in physics history, hidden in a unit conversion.
Milliampere – Frequently Asked Questions
How many milliamps is dangerous to a human?
The danger thresholds for 50/60 Hz AC are roughly: 1 mA (tingling), 10–20 mA (muscle lock — you cannot let go), 75–100 mA (ventricular fibrillation), and 200+ mA (cardiac arrest and burns). DC is somewhat less dangerous at the same current. Duration matters enormously — 100 mA for 1 second is more lethal than 100 mA for 10 ms.
Why is my phone charger rated in milliamps when it charges at 2 amps?
Battery capacity is rated in milliampere-hours (mAh), not milliamps. A 4,000 mAh battery holds 4,000 mA for one hour (or 2,000 mA for two hours). The charger delivers 2 A (2,000 mA) of current, and it takes about 2 hours to fill that 4,000 mAh battery from empty.
What is the milliamp draw of common household items?
A wireless earbud draws 5–15 mA during playback. A TV remote uses about 10 mA when pressing a button. An LED nightlight consumes 20–50 mA. A smoke detector in standby draws 10–30 μA (0.01–0.03 mA) — so low it runs on a 9V battery for years.
Why do LED specifications always mention 20 mA?
Standard 5 mm indicator LEDs were designed around a 20 mA operating point — bright enough to see clearly, low enough to avoid overheating the tiny die. All datasheet specs (luminous intensity, color, forward voltage) are measured at this "test current." High-power LEDs use 350 mA or 700 mA as their reference instead.
How does milliamp-hour (mAh) relate to milliamp (mA)?
Milliamp-hours measure charge capacity; milliamps measure current flow rate. A 2,000 mAh battery can deliver 2,000 mA for 1 hour, or 200 mA for 10 hours, or 20 mA for 100 hours — current times time equals capacity. Dividing mAh by mA gives approximate runtime in hours.