Gilbert to Weber per henry
Gi
Wb/H
Conversion History
| Conversion | Reuse | Delete |
|---|---|---|
1 Gi (Gilbert) → 0.79577499999999604699 Wb/H (Weber per henry) Just now |
Quick Reference Table (Gilbert to Weber per henry)
| Gilbert (Gi) | Weber per henry (Wb/H) |
|---|---|
| 0.1 | 0.0795774999999996047 |
| 0.5 | 0.39788749999999802349 |
| 1 | 0.79577499999999604699 |
| 2 | 1.59154999999999209398 |
| 5 | 3.97887499999998023494 |
| 10 | 7.95774999999996046988 |
| 100 | 79.57749999999960469877 |
About Gilbert (Gi)
The gilbert (Gi) equals 10/(4π) amperes — approximately 0.7958 A — and is the CGS-EMU unit of magnetomotive force (MMF) rather than a general-purpose current unit. In magnetic circuit analysis, MMF drives magnetic flux through a reluctance, analogously to how voltage drives current through resistance. A single-turn coil carrying 1 Gi of MMF passes 0.7958 A. In SI, magnetomotive force is measured in ampere-turns (A·T). The gilbert is obsolete but historically significant in transformer design, relay engineering, and magnetic circuit analysis dating from the late 19th century through the 1960s.
A relay coil requiring 2 Gi of MMF to actuate needs about 1.6 A·turn in SI terms. Vintage transformer and relay datasheets from the 1940s–1960s often specify MMF in gilberts.
Etymology: Named after William Gilbert (1544–1603), English physician and natural philosopher who authored De Magnete (1600), the first systematic scientific study of magnetism and electricity, establishing that the Earth itself acts as a giant magnet.
About Weber per henry (Wb/H)
The weber per henry (Wb/H) equals one ampere, derived from inductance: the magnetic flux Φ stored in an inductor equals inductance L times current I (Φ = L·I), so I = Φ/L = Wb/H. This form appears in electromagnetic field theory and inductor design where engineers compute the current required to establish a given magnetic flux in a core. One weber of flux in a one-henry inductor corresponds to exactly one ampere of magnetising current. The Wb/H notation is common in transformer and motor design calculations, magnetic circuit analysis, and advanced EMC engineering where field and circuit quantities must be reconciled.
A 1 H inductor carrying 5 A stores 5 Wb of magnetic flux — expressed as 5 Wb/H. Power transformer core saturation analysis links flux density to Wb/H magnetising current.
Gilbert – Frequently Asked Questions
Why is the gilbert approximately 0.7958 amperes and not a round number?
The gilbert equals 10/(4π) amperes because the CGS-EMU system uses a different form of Ampere's law where the factor 4π appears explicitly rather than being absorbed into μ₀. This "unrationalised" form distributes 4π differently in the equations, producing the 1/(4π) factor when converting to SI's "rationalised" system.
What is magnetomotive force and how is it different from regular current?
MMF is the magnetic analogue of voltage — it drives flux through a magnetic circuit the way EMF drives current through an electrical circuit. For a coil, MMF = N × I (turns times current). A 100-turn coil carrying 1 A has 100 ampere-turns of MMF. In CGS, that same MMF would be about 125.7 gilberts.
Who was William Gilbert and why does he deserve a unit?
Gilbert (1544–1603) was physician to Queen Elizabeth I and author of De Magnete (1600), the first true scientific investigation of magnetism. He demonstrated that Earth is a magnet, distinguished magnetic from electrostatic attraction, and coined the word "electricus." He did all this 87 years before Newton's Principia — a genuine pioneer of experimental science.
Where would I find gilberts used today?
Practically nowhere in new designs. You might encounter gilberts in vintage relay and transformer datasheets from the 1940s–1960s, in older American and European magnetic component catalogs, or in classic electrical engineering textbooks. Any modern magnetic circuit analysis uses ampere-turns (A·T) for MMF.
How do I convert gilberts to ampere-turns?
Multiply gilberts by 10/(4π) ≈ 0.7958 to get ampere-turns. Wait — that is backwards. Multiply gilberts by 0.7958 to get amperes for a single-turn coil. For MMF conversion: 1 gilbert = 0.7958 ampere-turns. So a relay spec of 5 Gi needs about 4 ampere-turns to actuate — for instance, 4 turns at 1 A or 8 turns at 0.5 A.
Weber per henry – Frequently Asked Questions
Why would a transformer designer think in webers per henry?
When designing a transformer, you start with the required flux (webers) to transfer power at a given voltage and frequency. The core's inductance (henries) is set by geometry and material. Dividing flux by inductance gives the magnetising current that must flow — and if it is too high, the core saturates and the transformer overheats.
What is a weber in practical terms?
One weber is the magnetic flux that, when reduced to zero in one second, induces one volt in a single-turn coil. A small transformer core might carry 0.001 Wb (1 mWb) of peak flux. The Earth's magnetic field through a 1 m² loop is about 50 μWb. One weber is actually an enormous amount of flux in everyday terms.
What happens when the Wb/H calculation shows too much current?
If the calculated magnetising current (Wb/H) exceeds design limits, the core is approaching magnetic saturation. The inductance drops sharply, current spikes further, and the inductor or transformer overheats. Solutions include using a larger core, higher-permeability material, an air gap, or reducing the operating flux density.
How does core saturation relate to the Wb/H ratio?
Every magnetic core has a saturation flux density (e.g., 1.5 T for silicon steel, 0.3 T for ferrite). When flux approaches this limit, permeability collapses, inductance plummets, and Wb/H (current) shoots up. Power supply designers must ensure peak flux stays 20–30% below saturation under worst-case conditions.
How does an air gap in an inductor core change the Wb/H calculation?
An air gap dramatically increases the reluctance of the magnetic circuit, which lowers inductance (H) for the same core geometry. For a given flux (Wb), the magnetising current (Wb/H) increases — but the core is far harder to saturate. Power supply designers deliberately add 0.1–1 mm air gaps to ferrite cores so the inductor can handle higher peak currents without the flux density hitting saturation limits.