Kiloampere to Coulomb per second
kA
C/s
Conversion History
| Conversion | Reuse | Delete |
|---|---|---|
| No conversion history to show. | ||
Quick Reference Table (Kiloampere to Coulomb per second)
| Kiloampere (kA) | Coulomb per second (C/s) |
|---|---|
| 1 | 1,000 |
| 10 | 10,000 |
| 30 | 30,000 |
| 100 | 100,000 |
| 200 | 200,000 |
| 300 | 300,000 |
About Kiloampere (kA)
The kiloampere (kA) equals one thousand amperes and appears where extremely high currents are generated or measured. A typical lightning bolt carries a peak current of 20–30 kA, though extreme strokes can exceed 200 kA. Industrial arc furnaces melting steel draw 50–100 kA through graphite electrodes. Aluminum electrolysis cells in smelters operate at 150–500 kA of continuous DC current per pot. Rail electromagnetic launchers pulse at hundreds of kiloamperes. Resistance spot welding uses 5–30 kA pulses lasting milliseconds to join metal sheets.
A typical lightning bolt peaks at 20–30 kA. Aluminum smelting cells run continuously at 150–300 kA of electrolysis current.
About Coulomb per second (C/s)
The coulomb per second (C/s) is a derived SI expression for electric current that makes the physical definition explicit: one ampere is exactly one coulomb of charge passing a point per second. The relationship I = Q/t links current (A), charge (C), and time (s). While C/s and A are numerically identical and dimensionally equivalent, the C/s form appears in physics textbooks and dimensional analyses where the derivation from charge and time is instructive rather than treating the ampere as primitive. In calculations tracking charge accumulation — capacitor discharge, electroplating, or battery coulomb-counting — expressing current in C/s clarifies the unit chain.
A capacitor delivering 1 C of charge over 1 second discharges at exactly 1 C/s = 1 A. A 500 mA USB charger transfers 0.5 C of charge each second.
Kiloampere – Frequently Asked Questions
How does a spot welder push 10,000 amps through two sheets of metal?
A spot welder uses a large step-down transformer: high voltage at low current on the primary becomes very low voltage (1–2 V) at enormous current (5–30 kA) on the secondary. The copper electrode tips concentrate this current into a small spot, melting the metal in milliseconds. Total power is only 10–60 kW — it is the concentration that does the work.
What happens to a wire if you put a kiloampere through it?
A typical 14 AWG house wire rated for 15 A would vaporise almost instantly at 1 kA — the I²R heating would melt copper in milliseconds. Industrial busbars carrying kiloamperes are massive rectangular copper or aluminum bars, sometimes water-cooled, with cross-sections of 10–100 cm² to keep current density manageable.
How much current does a lightning bolt actually carry?
A typical negative cloud-to-ground stroke peaks at 20–30 kA for about 1–2 microseconds. Positive lightning (rarer, about 5% of strikes) can exceed 300 kA. The total charge transferred is only 1–5 coulombs because the pulse is so brief — enormous current, tiny duration.
Why do aluminum smelters need hundreds of kiloamperes?
Aluminum oxide dissolved in molten cryolite at 960 degrees C requires direct electrolytic reduction to separate aluminum metal. Each smelting pot runs at 4–5 V but needs 150–500 kA because the electrochemical reaction requires massive charge transfer. A single smelter may consume 1–2 GW — as much as a small city.
What protects electrical systems from kiloampere fault currents?
Circuit breakers rated for 10–200 kA interrupting capacity use arc-quenching chambers to extinguish the plasma arc that forms when contacts open under fault current. High-rupture-capacity (HRC) fuses have sand-filled ceramic bodies that absorb the arc energy. Without these devices, a short circuit on a utility feed would weld everything in the panel into slag.
Coulomb per second – Frequently Asked Questions
Why bother writing coulombs per second when it is just amperes?
In dimensional analysis and physics derivations, C/s makes the relationship between charge and current explicit. When you are computing how much silver an electroplating bath deposits (Faraday's law), writing current as C/s reminds you that charge = current × time, which directly gives the mass deposited.
How many electrons is one coulomb?
One coulomb is approximately 6.242 × 10¹⁸ electrons — about 6.2 quintillion. At 1 C/s (1 A), that many electrons pass a point in your wire every single second. A USB cable charging your phone at 2 A carries 12.5 quintillion electrons per second. The numbers are staggering but the charges are tiny.
Is coulombs per second used in any real-world instrument or specification?
Not directly — every instrument reads in amperes or milliamperes. But coulomb-counting battery fuel gauges internally track charge in coulombs by integrating current over time: ∫I dt. The C/s framing appears in battery management system firmware and electrochemistry literature where charge balance matters.
How does Faraday's law of electrolysis use coulombs to predict metal deposition?
Faraday discovered that the mass of metal deposited at an electrode is directly proportional to the total charge passed (in coulombs). For silver, 107.87 grams deposit per 96,485 C (one Faraday). So a 10 A electroplating bath running for 1 hour passes 36,000 C and deposits about 40 g of silver. Thinking in C/s makes the calculation: current × time × atomic weight / (valence × 96,485).
How does coulomb counting work in battery management systems?
A shunt resistor or Hall sensor continuously measures current flowing in and out of the battery. The BMS integrates this current over time (summing C/s × Δt) to track net charge. Drift and measurement errors accumulate, so smart BMS designs periodically recalibrate against voltage-based state-of-charge estimates.