Megaampere to Coulomb per second
mA
C/s
Conversion History
| Conversion | Reuse | Delete |
|---|---|---|
| No conversion history to show. | ||
Quick Reference Table (Megaampere to Coulomb per second)
| Megaampere (mA) | Coulomb per second (C/s) |
|---|---|
| 1 | 1,000,000 |
| 5 | 5,000,000 |
| 10 | 10,000,000 |
| 15 | 15,000,000 |
| 26 | 26,000,000 |
| 100 | 100,000,000 |
About Megaampere (mA)
The megaampere (MA) equals one million amperes and occurs only in extreme natural events and large-scale research facilities. Tokamak fusion reactors drive plasma currents of 1–15 MA to achieve the magnetic confinement required for nuclear fusion. Pulsed-power facilities use megaampere-class discharges to compress metal liners, study shock physics, or drive Z-pinch plasmas — at these currents, magnetic forces are sufficient to crush metal cylinders in microseconds. The most energetic lightning superbolts are estimated to approach 1 MA. No engineered steady-state system produces megaampere currents continuously.
The Z Machine at Sandia National Laboratories discharges up to 26 MA. The ITER fusion reactor is designed to sustain plasma currents of about 15 MA.
About Coulomb per second (C/s)
The coulomb per second (C/s) is a derived SI expression for electric current that makes the physical definition explicit: one ampere is exactly one coulomb of charge passing a point per second. The relationship I = Q/t links current (A), charge (C), and time (s). While C/s and A are numerically identical and dimensionally equivalent, the C/s form appears in physics textbooks and dimensional analyses where the derivation from charge and time is instructive rather than treating the ampere as primitive. In calculations tracking charge accumulation — capacitor discharge, electroplating, or battery coulomb-counting — expressing current in C/s clarifies the unit chain.
A capacitor delivering 1 C of charge over 1 second discharges at exactly 1 C/s = 1 A. A 500 mA USB charger transfers 0.5 C of charge each second.
Megaampere – Frequently Asked Questions
How does the Z Machine at Sandia produce 26 million amps?
The Z Machine stores energy in massive capacitor banks (about 22 MJ) then discharges it through a converging array of transmission lines into a tiny central target in roughly 100 nanoseconds. The extremely short pulse duration means the instantaneous current reaches 26 MA, but only for microseconds. The peak power briefly exceeds 80 TW — more than the entire world's electrical grid.
What does a megaampere of current do to matter?
At megaampere levels, the magnetic field generated by the current itself becomes an overwhelming force. In Z-pinch experiments, the current's own magnetic field crushes a metal cylinder inward at velocities exceeding 600 km/s, reaching pressures found inside giant planets. The material is compressed, heated to millions of degrees, and emits intense X-rays.
Why does a fusion reactor need megaamperes of plasma current?
In a tokamak, the plasma current generates a poloidal magnetic field that, combined with external toroidal fields, creates the helical field geometry needed to confine plasma at 150 million degrees C. ITER needs 15 MA to maintain this confinement long enough for deuterium-tritium fusion to produce net energy.
Could a lightning superbolt reach megaampere levels?
The most extreme positive lightning superbolts — occurring over oceans and detected by satellite — may briefly reach 0.5–1 MA peak current. These are extraordinarily rare, representing perhaps 1 in 1,000,000 lightning strokes. A typical bolt is "only" 20–30 kA, about 50 times weaker.
How do scientists measure megaampere currents?
Nobody puts a clamp meter around 26 MA. Instead, they use Rogowski coils (air-core toroids around the conductor) or B-dot probes that measure the rate of change of the magnetic field. The current is then calculated from Maxwell's equations. These sensors can respond in nanoseconds and survive the brutal electromagnetic environment.
Coulomb per second – Frequently Asked Questions
Why bother writing coulombs per second when it is just amperes?
In dimensional analysis and physics derivations, C/s makes the relationship between charge and current explicit. When you are computing how much silver an electroplating bath deposits (Faraday's law), writing current as C/s reminds you that charge = current × time, which directly gives the mass deposited.
How many electrons is one coulomb?
One coulomb is approximately 6.242 × 10¹⁸ electrons — about 6.2 quintillion. At 1 C/s (1 A), that many electrons pass a point in your wire every single second. A USB cable charging your phone at 2 A carries 12.5 quintillion electrons per second. The numbers are staggering but the charges are tiny.
Is coulombs per second used in any real-world instrument or specification?
Not directly — every instrument reads in amperes or milliamperes. But coulomb-counting battery fuel gauges internally track charge in coulombs by integrating current over time: ∫I dt. The C/s framing appears in battery management system firmware and electrochemistry literature where charge balance matters.
How does Faraday's law of electrolysis use coulombs to predict metal deposition?
Faraday discovered that the mass of metal deposited at an electrode is directly proportional to the total charge passed (in coulombs). For silver, 107.87 grams deposit per 96,485 C (one Faraday). So a 10 A electroplating bath running for 1 hour passes 36,000 C and deposits about 40 g of silver. Thinking in C/s makes the calculation: current × time × atomic weight / (valence × 96,485).
How does coulomb counting work in battery management systems?
A shunt resistor or Hall sensor continuously measures current flowing in and out of the battery. The BMS integrates this current over time (summing C/s × Δt) to track net charge. Drift and measurement errors accumulate, so smart BMS designs periodically recalibrate against voltage-based state-of-charge estimates.