Milliampere to Microampere
mA
μA
Conversion History
| Conversion | Reuse | Delete |
|---|---|---|
| No conversion history to show. | ||
Quick Reference Table (Milliampere to Microampere)
| Milliampere (mA) | Microampere (μA) |
|---|---|
| 1 | 1,000 |
| 5 | 5,000 |
| 20 | 20,000 |
| 100 | 100,000 |
| 500 | 500,000 |
| 1,000 | 1,000,000 |
| 2,000 | 2,000,000 |
About Milliampere (mA)
The milliampere (mA) equals one thousandth of an ampere (10⁻³ A) and is the practical unit for most consumer electronics and lighting circuits. USB 2.0 ports supply up to 500 mA; USB-C Power Delivery can reach 5,000 mA (5 A). A standard 5 mm indicator LED operates at 10–20 mA; mid-power LED drivers supply 100–350 mA. Human perception of electric shock begins near 1 mA; currents above 10 mA cause involuntary muscle contraction, and above 100 mA can be lethal. Wireless sensors, earphones, and small motors typically draw single-digit to low-hundreds of milliamperes.
A USB 2.0 port provides up to 500 mA for charging. A standard 5 mm indicator LED operates at around 20 mA.
About Microampere (μA)
The microampere (μA) equals one millionth of an ampere (10⁻⁶ A) and is the standard unit for quiescent and standby currents in battery-powered electronics. Operational amplifier input bias currents, photodiode outputs under dim light, and EEG scalp electrode signals all fall in the microampere range. Many modern microcontrollers in low-power run mode consume under 100 μA, enabling coin-cell operation for months. Analytical instruments such as pH meters and reference electrodes operate at microampere levels to avoid disturbing the solution being measured. Implantable cardiac pacemakers deliver stimulation pulses of several hundred microamperes.
A cardiac pacemaker delivers stimulation pulses of roughly 100–500 μA. A modern ARM microcontroller in active low-power mode draws around 50–200 μA.
Milliampere – Frequently Asked Questions
How many milliamps is dangerous to a human?
The danger thresholds for 50/60 Hz AC are roughly: 1 mA (tingling), 10–20 mA (muscle lock — you cannot let go), 75–100 mA (ventricular fibrillation), and 200+ mA (cardiac arrest and burns). DC is somewhat less dangerous at the same current. Duration matters enormously — 100 mA for 1 second is more lethal than 100 mA for 10 ms.
Why is my phone charger rated in milliamps when it charges at 2 amps?
Battery capacity is rated in milliampere-hours (mAh), not milliamps. A 4,000 mAh battery holds 4,000 mA for one hour (or 2,000 mA for two hours). The charger delivers 2 A (2,000 mA) of current, and it takes about 2 hours to fill that 4,000 mAh battery from empty.
What is the milliamp draw of common household items?
A wireless earbud draws 5–15 mA during playback. A TV remote uses about 10 mA when pressing a button. An LED nightlight consumes 20–50 mA. A smoke detector in standby draws 10–30 μA (0.01–0.03 mA) — so low it runs on a 9V battery for years.
Why do LED specifications always mention 20 mA?
Standard 5 mm indicator LEDs were designed around a 20 mA operating point — bright enough to see clearly, low enough to avoid overheating the tiny die. All datasheet specs (luminous intensity, color, forward voltage) are measured at this "test current." High-power LEDs use 350 mA or 700 mA as their reference instead.
How does milliamp-hour (mAh) relate to milliamp (mA)?
Milliamp-hours measure charge capacity; milliamps measure current flow rate. A 2,000 mAh battery can deliver 2,000 mA for 1 hour, or 200 mA for 10 hours, or 20 mA for 100 hours — current times time equals capacity. Dividing mAh by mA gives approximate runtime in hours.
Microampere – Frequently Asked Questions
How long can a coin cell battery last at microampere currents?
A CR2032 coin cell has about 225 mAh capacity. At 10 μA continuous draw, it lasts roughly 225,000 / 10 = 22,500 hours — about 2.5 years. At 1 μA, theoretical life exceeds 25 years, though self-discharge limits practical life to about 10 years.
Can microampere currents be dangerous to humans?
Not from shock — the perception threshold is about 500 μA (0.5 mA) for DC and 1,000 μA for AC at 60 Hz. However, microampere currents applied directly to the heart (e.g., through a catheter) can cause ventricular fibrillation at as little as 50–100 μA, which is why medical device safety standards are so strict.
Why do pH meters need to operate at microampere levels?
A glass pH electrode has an internal resistance of 10–1,000 megaohms. Drawing more than a few microamperes would cause voltage drops across this resistance, shifting the reading. Modern pH meters use high-input-impedance amplifiers that draw under 1 μA to avoid disturbing the electrochemical potential being measured.
What is quiescent current and why is it measured in microamperes?
Quiescent current (Iq) is what an IC draws when powered on but doing nothing — no signal processing, no load driving. For battery-powered designs, low Iq is critical. A voltage regulator with 1 μA Iq wastes far less standby power than one with 100 μA, directly extending battery life in always-on devices.
How does a pacemaker deliver just a few hundred microamperes so precisely?
Pacemakers use constant-current output stages that regulate pulse amplitude to within ±5 μA. The pulse is typically 100–500 μA for 0.4–1.5 ms, just enough to depolarise heart tissue and trigger a contraction. Modern devices automatically adjust the current to the minimum needed, conserving the battery for its 8–12 year design life.