Siemens volt to EMU of current
S.V
EMU
Conversion History
| Conversion | Reuse | Delete |
|---|---|---|
1 S.V (Siemens volt) → 0.1 EMU (EMU of current) Just now |
Quick Reference Table (Siemens volt to EMU of current)
| Siemens volt (S.V) | EMU of current (EMU) |
|---|---|
| 0.1 | 0.01 |
| 1 | 0.1 |
| 5 | 0.5 |
| 10 | 1 |
| 20 | 2 |
| 100 | 10 |
About Siemens volt (S.V)
The siemens volt (S·V) is a derived expression equal to one ampere, arising from Ohm s law in conductance form: I = G × V, where G is conductance in siemens (S) and V is voltage in volts. Since one siemens equals one ampere per volt, S·V = (A/V)·V = A exactly. The S·V notation rarely appears in practical measurement — current is universally reported in amperes — but it occurs in network analysis and conductance-based circuit modeling, particularly in nodal admittance matrix methods used in power systems and RF circuit simulation. It illustrates that current, conductance, and voltage are linked rather than independent.
A conductor with 0.5 S conductance across 2 V passes 1 S·V = 1 A. Admittance matrix formulations in power flow analysis express branch currents as S·V products.
About EMU of current (EMU)
The electromagnetic unit (EMU) of current equals exactly 10 amperes, numerically identical to the biot. It is the current unit native to the CGS electromagnetic (CGS-EMU) system, which dominated electrical physics from the mid-19th century until SI adoption in 1960. In CGS-EMU, the permeability of free space is defined as 1, giving the electromagnetic subsystem its characteristic form where magnetic force between parallel currents is expressed purely in dynes. The EMU of current appears in classical electrodynamics texts, historical measurement standards, and theoretical physics work using CGS-EMU conventions. All practical electrical measurement now uses SI amperes.
1 EMU of current = 10 A. A 50 A arc welding process carries 5 EMU. The unit is encountered primarily in pre-1960 scientific literature.
Siemens volt – Frequently Asked Questions
When would anyone actually use siemens volts instead of just amperes?
In nodal admittance matrix analysis of power grids and RF networks, bus currents are computed as the product of an admittance matrix (siemens) and a voltage vector (volts). The intermediate result is naturally in S·V before being labelled as amperes. It is a computational stepping stone rather than a measurement unit.
What is a siemens and where does the name come from?
The siemens (S) is the SI unit of electrical conductance — the reciprocal of resistance in ohms. One siemens means one ampere flows per volt applied. It is named after Werner von Siemens (1816–1892), German inventor and industrialist who founded the Siemens company and pioneered telegraph and electrical engineering.
How does conductance-based analysis differ from resistance-based?
In complex networks with many parallel paths, adding conductances (siemens) is simpler than combining resistances — parallel conductances just add, like parallel resistances require reciprocal math. Power system load-flow software uses admittance (Y = G + jB in siemens) matrices because they are sparse and computationally efficient.
Is siemens volt the same as watt per volt?
Yes, dimensionally they are both equal to one ampere: S·V = (A/V)·V = A, and W/V = (V·A)/V = A. The difference is conceptual — S·V emphasizes conductance times voltage (Ohm's law), while W/V emphasizes power divided by voltage (the power equation). Same number, different story.
Why does the admittance matrix method dominate power systems analysis?
Power grids have thousands of buses and transmission lines. The admittance matrix is large but very sparse (most buses connect to only a few neighbors), making it ideal for efficient numerical solvers. Expressing branch currents as Y·V (siemens times volts) enables Newton-Raphson load flow algorithms that converge in just 3–5 iterations for most grids.
EMU of current – Frequently Asked Questions
What does EMU stand for and why was it created?
EMU stands for "electromagnetic unit." In the 1860s–1870s, physicists needed separate unit systems for electrostatic and electromagnetic phenomena because they had not yet unified them. The EMU system was built around magnetic force between currents, while the ESU system was built around Coulomb's electrostatic force. The ratio between them turned out to be the speed of light — a clue that led to Maxwell's equations.
Is the EMU of current the same as a biot?
Yes, exactly. Both equal 10 amperes. The biot is the named unit; "EMU of current" is the generic label. It is like saying "SI unit of force" versus "newton" — same thing, different label. The CGS-EMU system also has named units for other quantities: the gauss (magnetic field), the oersted (magnetising field), and the maxwell (magnetic flux).
Why did physics abandon the EMU system?
The EMU system was awkward for practical electrical engineering — 1 EMU of resistance (the abohm) equals 10⁻⁹ ohms, making everyday values absurdly large numbers. The SI system, adopted in 1960, unified mechanical and electrical units into one coherent framework with human-scale values. Practicality won over tradition.
Where might I encounter EMU of current in old scientific papers?
Pre-1960 physics journals, particularly in geomagnetism, plasma physics, and early electrical standards work, routinely use EMU. Geophysicists measuring Earth's magnetic field historically reported results in CGS-EMU units (gauss, oersted, EMU). Some geophysics reference data still has not been converted to SI.
How did the speed of light connect the EMU and ESU systems?
Weber and Kohlrausch discovered in 1856 that the ratio of the ESU to EMU charge was approximately 3×10¹⁰ cm/s — the speed of light. This was no coincidence: Maxwell showed that light is an electromagnetic wave, and the unit ratio reflects the fundamental coupling between electric and magnetic fields. One of the greatest insights in physics history, hidden in a unit conversion.