Siemens volt to Gilbert
S.V
Gi
Conversion History
| Conversion | Reuse | Delete |
|---|---|---|
1 S.V (Siemens volt) → 1.2566366121077 Gi (Gilbert) Just now |
Quick Reference Table (Siemens volt to Gilbert)
| Siemens volt (S.V) | Gilbert (Gi) |
|---|---|
| 0.1 | 0.12566366121077 |
| 1 | 1.2566366121077 |
| 5 | 6.2831830605385 |
| 10 | 12.566366121077 |
| 20 | 25.132732242154 |
| 100 | 125.66366121077 |
About Siemens volt (S.V)
The siemens volt (S·V) is a derived expression equal to one ampere, arising from Ohm s law in conductance form: I = G × V, where G is conductance in siemens (S) and V is voltage in volts. Since one siemens equals one ampere per volt, S·V = (A/V)·V = A exactly. The S·V notation rarely appears in practical measurement — current is universally reported in amperes — but it occurs in network analysis and conductance-based circuit modeling, particularly in nodal admittance matrix methods used in power systems and RF circuit simulation. It illustrates that current, conductance, and voltage are linked rather than independent.
A conductor with 0.5 S conductance across 2 V passes 1 S·V = 1 A. Admittance matrix formulations in power flow analysis express branch currents as S·V products.
About Gilbert (Gi)
The gilbert (Gi) equals 10/(4π) amperes — approximately 0.7958 A — and is the CGS-EMU unit of magnetomotive force (MMF) rather than a general-purpose current unit. In magnetic circuit analysis, MMF drives magnetic flux through a reluctance, analogously to how voltage drives current through resistance. A single-turn coil carrying 1 Gi of MMF passes 0.7958 A. In SI, magnetomotive force is measured in ampere-turns (A·T). The gilbert is obsolete but historically significant in transformer design, relay engineering, and magnetic circuit analysis dating from the late 19th century through the 1960s.
A relay coil requiring 2 Gi of MMF to actuate needs about 1.6 A·turn in SI terms. Vintage transformer and relay datasheets from the 1940s–1960s often specify MMF in gilberts.
Etymology: Named after William Gilbert (1544–1603), English physician and natural philosopher who authored De Magnete (1600), the first systematic scientific study of magnetism and electricity, establishing that the Earth itself acts as a giant magnet.
Siemens volt – Frequently Asked Questions
When would anyone actually use siemens volts instead of just amperes?
In nodal admittance matrix analysis of power grids and RF networks, bus currents are computed as the product of an admittance matrix (siemens) and a voltage vector (volts). The intermediate result is naturally in S·V before being labelled as amperes. It is a computational stepping stone rather than a measurement unit.
What is a siemens and where does the name come from?
The siemens (S) is the SI unit of electrical conductance — the reciprocal of resistance in ohms. One siemens means one ampere flows per volt applied. It is named after Werner von Siemens (1816–1892), German inventor and industrialist who founded the Siemens company and pioneered telegraph and electrical engineering.
How does conductance-based analysis differ from resistance-based?
In complex networks with many parallel paths, adding conductances (siemens) is simpler than combining resistances — parallel conductances just add, like parallel resistances require reciprocal math. Power system load-flow software uses admittance (Y = G + jB in siemens) matrices because they are sparse and computationally efficient.
Is siemens volt the same as watt per volt?
Yes, dimensionally they are both equal to one ampere: S·V = (A/V)·V = A, and W/V = (V·A)/V = A. The difference is conceptual — S·V emphasizes conductance times voltage (Ohm's law), while W/V emphasizes power divided by voltage (the power equation). Same number, different story.
Why does the admittance matrix method dominate power systems analysis?
Power grids have thousands of buses and transmission lines. The admittance matrix is large but very sparse (most buses connect to only a few neighbors), making it ideal for efficient numerical solvers. Expressing branch currents as Y·V (siemens times volts) enables Newton-Raphson load flow algorithms that converge in just 3–5 iterations for most grids.
Gilbert – Frequently Asked Questions
Why is the gilbert approximately 0.7958 amperes and not a round number?
The gilbert equals 10/(4π) amperes because the CGS-EMU system uses a different form of Ampere's law where the factor 4π appears explicitly rather than being absorbed into μ₀. This "unrationalised" form distributes 4π differently in the equations, producing the 1/(4π) factor when converting to SI's "rationalised" system.
What is magnetomotive force and how is it different from regular current?
MMF is the magnetic analogue of voltage — it drives flux through a magnetic circuit the way EMF drives current through an electrical circuit. For a coil, MMF = N × I (turns times current). A 100-turn coil carrying 1 A has 100 ampere-turns of MMF. In CGS, that same MMF would be about 125.7 gilberts.
Who was William Gilbert and why does he deserve a unit?
Gilbert (1544–1603) was physician to Queen Elizabeth I and author of De Magnete (1600), the first true scientific investigation of magnetism. He demonstrated that Earth is a magnet, distinguished magnetic from electrostatic attraction, and coined the word "electricus." He did all this 87 years before Newton's Principia — a genuine pioneer of experimental science.
Where would I find gilberts used today?
Practically nowhere in new designs. You might encounter gilberts in vintage relay and transformer datasheets from the 1940s–1960s, in older American and European magnetic component catalogs, or in classic electrical engineering textbooks. Any modern magnetic circuit analysis uses ampere-turns (A·T) for MMF.
How do I convert gilberts to ampere-turns?
Multiply gilberts by 10/(4π) ≈ 0.7958 to get ampere-turns. Wait — that is backwards. Multiply gilberts by 0.7958 to get amperes for a single-turn coil. For MMF conversion: 1 gilbert = 0.7958 ampere-turns. So a relay spec of 5 Gi needs about 4 ampere-turns to actuate — for instance, 4 turns at 1 A or 8 turns at 0.5 A.