Revolution to Grad (Gon)
rev
grad
Conversion History
| Conversion | Reuse | Delete |
|---|---|---|
| No conversion history to show. | ||
Quick Reference Table (Revolution to Grad (Gon))
| Revolution (rev) | Grad (Gon) (grad) |
|---|---|
| 0.25 | 100 |
| 0.5 | 200 |
| 1 | 400 |
| 2 | 800 |
| 5 | 2,000 |
| 10 | 4,000 |
About Revolution (rev)
A revolution is one complete rotation, equal to 360° or 2π radians. The term is common in mechanics and engineering when describing rotating machinery — engine crankshafts, wheels, turbines, and motors. Rotational speed is measured in revolutions per minute (RPM), one of the most widely used mechanical specifications. Unlike "turn" or "circle", "revolution" often implies a physical object completing a full orbital or axial rotation, such as a planet revolving around the sun.
A car engine idling at 700 RPM completes 700 revolutions every minute. Earth completes one revolution around the Sun every 365.25 days.
About Grad (Gon) (grad)
The grad (also called gon or grade, symbol: grad or g) divides a full circle into 400 equal parts, so a right angle is exactly 100 grad. It was introduced during the French metric reform of the late 18th century to create a decimal-friendly angular system compatible with metric measurements. The grad persists in civil engineering, land surveying, and mining in continental Europe, particularly in France, Germany, and Scandinavia. Most scientific calculators include a GRAD mode alongside DEG and RAD.
A slope of 1 grad in road engineering is a 1 gon incline from horizontal — used in surveying instruments and tachymeters across Europe.
Etymology: From the French "grade", introduced around 1793 as part of the revolutionary metric system. The 400-division was chosen so that a right angle equals exactly 100 grad, aligning with decimal arithmetic.
Revolution – Frequently Asked Questions
What does RPM actually measure and why is it used instead of degrees per second?
RPM (revolutions per minute) counts how many full 360° rotations an object completes each minute. It dominates because it maps directly to what you can see and feel — a wheel either goes around or it doesn't. Degrees per second would produce absurdly large numbers: an engine at 3,000 RPM is spinning at 18,000 degrees per second, which is meaningless to a mechanic. RPM is intuitive, and that's why every tachometer, drill spec sheet, and turntable rating uses it.
How fast does the Earth actually revolve and what would happen if it stopped?
Earth completes one revolution on its axis every 23 hours 56 minutes (a sidereal day). At the equator, that's a surface speed of about 1,670 km/h. If it suddenly stopped, everything not bolted to bedrock would continue moving eastward at that speed — winds would scour the surface, oceans would slosh into continental-scale tsunamis, and the atmosphere would take years to settle. Thankfully, Earth is decelerating by only about 2.3 milliseconds per century due to tidal friction with the Moon.
What are typical RPM ranges for common machines and engines?
A vinyl record plays at 33⅓ or 45 RPM. A washing machine spin cycle hits 1,000–1,400 RPM. A car engine idles at 600–900 RPM and redlines at 6,000–9,000 RPM (F1 cars reached 20,000 RPM before regulations capped them). A dentist's drill spins at 250,000–400,000 RPM. Hard drive platters rotate at 5,400 or 7,200 RPM. A jet engine's high-pressure turbine reaches 10,000–15,000 RPM. The fastest man-made spinning object — a nanorotor in a lab — reached 300 billion RPM in 2018.
What is the difference between a revolution and an orbit in astronomy?
In strict usage, "revolution" is orbital (Earth revolves around the Sun) while "rotation" is axial (Earth rotates on its axis). But colloquially the two words get swapped constantly, even by scientists. The key distinction: an orbit traces a path around an external point, while a spin is about an internal axis. The Moon is tidally locked, meaning its rotation period equals its revolution period — which is why we always see the same face.
Why do figure skaters spin faster when they pull their arms in?
Conservation of angular momentum. When a skater pulls their arms inward, they reduce their moment of inertia (the rotational equivalent of mass). Since angular momentum (L = Iω) must stay constant, decreasing I forces ω (angular velocity in revolutions per second) to increase. A skater can go from 2 revolutions per second with arms out to 5–7 revolutions per second with arms tucked. It's the same physics that makes neutron stars spin at hundreds of revolutions per second after a massive star collapses.
Grad (Gon) – Frequently Asked Questions
Why did the French Revolution create the gradian when degrees already worked fine?
The revolutionaries wanted to decimalize everything — length (meter), mass (kilogram), time (decimal hours), and angle. The gradian divided a right angle into exactly 100 parts, making it compatible with the new metric system and decimal arithmetic. A slope of 1% grade corresponds neatly to gradian-based calculations. Decimal time flopped within a year, the Republican Calendar lasted 12 years, but the gradian quietly survived in surveying because it genuinely simplifies land measurement calculations.
What is the difference between a gradian, a gon, and a grade?
They're all the same unit — 1/400 of a circle. "Gradian" is the international English term, "gon" is preferred in German-speaking countries and ISO standards, and "grade" is the original French name. The symbol varies too: grad, gon, or superscript g. This naming mess is partly why the unit never gained traction outside continental Europe — nobody could agree on what to call it.
Where are gradians still actually used today?
Primarily in civil engineering and land surveying in France, Germany, Switzerland, and Scandinavia. Total stations (electronic surveying instruments) from Leica and other European manufacturers default to gon. Mining engineers in Germany use gon for underground surveys. French national mapping uses grades for geodetic calculations. If you buy a Leica total station in Europe, you may need to switch it from gon to degrees before using it elsewhere.
Why does every scientific calculator have a GRAD mode that almost nobody uses?
Calculator manufacturers include DEG, RAD, and GRAD modes because international standards (particularly IEC 60747) require it, and European civil engineering exams expect students to work in gradians. The mode exists for a real user base — it's just a user base concentrated in specific countries and professions. The most common calculator accident in the world is probably getting wrong trig answers because the calculator was accidentally left in GRAD mode after someone else used it.
How do you convert between gradians and degrees?
Multiply gradians by 0.9 to get degrees, or multiply degrees by 10/9 to get gradians. A right angle is 100 grad = 90°. The conversion factor is 9/10 because 400/360 = 10/9. This means 50 grad = 45°, 200 grad = 180°, and 300 grad = 270°. The relationship is simple enough to do in your head, which is one of the few nice things about having two competing angular systems.