Gigabyte per second to Kibibit per second

CPUs constantly shuttle data between RAM and their caches. DDR5-6000 provides about 96 GB/s of bandwidth in dual-channel mode. In games, insufficient RAM bandwidth causes frame drops during complex scenes. In productivity tasks like video encoding, it directly limits how fast the CPU can process data.

Thunderbolt 4 runs at 40 Gbps, which is 5 GB/s. Thunderbolt 5, released in 2024, doubles this to 80 Gbps (10 GB/s) with a burst mode up to 120 Gbps (15 GB/s). This is fast enough to run an external NVMe SSD at near-internal speeds.

Both, depending on generation. A PCIe 3.0 ×4 interface caps at ~3.5 GB/s, bottlenecking modern NAND. PCIe 4.0 ×4 raises this to ~7 GB/s, and PCIe 5.0 ×4 to ~14 GB/s. The drive's NAND flash and controller also have limits — the fastest SSDs and the fastest interfaces are in a constant leapfrog.

GPUs use wide memory buses (256–384 bits) with very fast HBM or GDDR6X memory running at high clock speeds. An RTX 4090 has a 384-bit bus with GDDR6X at 21 Gbps per pin, totalling 1,008 GB/s. HBM3 in data center GPUs achieves 3,000+ GB/s through stacked memory with 4096-bit buses.

At multi-GB/s rates, CPU processing speed, software efficiency, and thermal throttling become bottlenecks. A 14 GB/s PCIe 5.0 SSD can deliver data faster than most applications can consume it. Decompression, parsing, and memory allocation in software often cannot keep up with raw storage bandwidth.

Because "kilo" was used to mean both 1,000 and 1,024 depending on context, causing real confusion. RAM manufacturers used 1,024 (binary) while network engineers used 1,000 (decimal). The IEC created kibi (Ki) in 1998 to unambiguously mean 1,024, leaving kilo for exactly 1,000.

Very few people outside of standards bodies and kernel developers. Linux kernel networking code sometimes uses binary units internally, and some IEC-compliant technical documents use Kibps. But consumer networking has fully standardized on decimal kilobits (kbps), making kibibits a niche pedantic distinction.

At the kibi/kilo level, only 2.4%. But the gap compounds — mebi vs mega is 4.86%, gibi vs giga is 7.37%, and tebi vs tera is 9.95%. A "1 TB" hard drive holds only 931 GiB in binary terms, which is why your new drive looks smaller than advertised in Windows.

Hard drives are built from sectors of arbitrary size, so decimal marketing (1 TB = 1,000 GB) is natural and makes drives look bigger. RAM is addressed in powers of 2 because of how binary memory chips work, so binary units (GiB) reflect actual hardware architecture. Neither side wants to change.

Almost certainly not. Networking adopted decimal (×1000) from the beginning because serial link speeds are clock-derived and have nothing to do with powers of 2. Ethernet has always been 10/100/1000 Mbps. Binary prefixes solve a storage problem that networking never had.