Megabit per second to Kibibit per second

Because ISPs advertise in megabits (Mb) while download managers show megabytes (MB). There are 8 bits in a byte, so 100 Mbps ÷ 8 = 12.5 MB/s. Your connection is working perfectly — it is just a unit mismatch that has confused people for decades.

Netflix recommends 25 Mbps for 4K, YouTube suggests 20 Mbps, and Apple TV+ needs about 25 Mbps. In practice, 50 Mbps gives comfortable headroom for one 4K stream plus normal browsing. A household streaming on multiple devices simultaneously should aim for 100+ Mbps.

Wi-Fi shares bandwidth among all connected devices, loses throughput to interference from walls and other electronics, and uses half-duplex communication (it cannot send and receive simultaneously). A 300 Mbps Wi-Fi router might deliver 100–150 Mbps to a single device in practice, while Ethernet gives you the full rated speed.

Download Mbps measures data coming to you (streaming, browsing), while upload Mbps measures data you send (video calls, cloud backups). Most home connections are asymmetric — 100 Mbps down but only 10–20 Mbps up. Fiber-to-the-home plans increasingly offer symmetric speeds.

Surprisingly little — most online games use only 1–3 Mbps of bandwidth. What gamers actually need is low latency (ping), not high throughput. A 10 Mbps connection with 15ms ping will outperform a 500 Mbps connection with 100ms ping for gaming every time.

Because "kilo" was used to mean both 1,000 and 1,024 depending on context, causing real confusion. RAM manufacturers used 1,024 (binary) while network engineers used 1,000 (decimal). The IEC created kibi (Ki) in 1998 to unambiguously mean 1,024, leaving kilo for exactly 1,000.

Very few people outside of standards bodies and kernel developers. Linux kernel networking code sometimes uses binary units internally, and some IEC-compliant technical documents use Kibps. But consumer networking has fully standardized on decimal kilobits (kbps), making kibibits a niche pedantic distinction.

At the kibi/kilo level, only 2.4%. But the gap compounds — mebi vs mega is 4.86%, gibi vs giga is 7.37%, and tebi vs tera is 9.95%. A "1 TB" hard drive holds only 931 GiB in binary terms, which is why your new drive looks smaller than advertised in Windows.

Hard drives are built from sectors of arbitrary size, so decimal marketing (1 TB = 1,000 GB) is natural and makes drives look bigger. RAM is addressed in powers of 2 because of how binary memory chips work, so binary units (GiB) reflect actual hardware architecture. Neither side wants to change.

Almost certainly not. Networking adopted decimal (×1000) from the beginning because serial link speeds are clock-derived and have nothing to do with powers of 2. Ethernet has always been 10/100/1000 Mbps. Binary prefixes solve a storage problem that networking never had.