Megabyte per second to Kilobit per second
MBps
Kbps
Conversion History
| Conversion | Reuse | Delete |
|---|---|---|
| No conversion history to show. | ||
Quick Reference Table (Megabyte per second to Kilobit per second)
| Megabyte per second (MBps) | Kilobit per second (Kbps) |
|---|---|
| 1 | 8,000 |
| 12.5 | 100,000 |
| 50 | 400,000 |
| 100 | 800,000 |
| 500 | 4,000,000 |
| 1,000 | 8,000,000 |
| 7,000 | 56,000,000 |
About Megabyte per second (MBps)
A megabyte per second (MB/s or MBps) equals 8,000,000 bits per second and is the practical unit that most users encounter when watching a download progress bar. A 100 Mbps broadband connection downloads at up to 12.5 MB/s; a USB 3.0 drive transfers at 50–100 MB/s; an NVMe SSD reads at 3,000–7,000 MB/s. Understanding MB/s alongside Mbps resolves the common frustration of seeing a "1 Gbps" plan deliver "only" 125 MB/s — the two figures are consistent, not contradictory.
A 100 Mbps home broadband plan delivers up to 12.5 MB/s in a download manager. A USB 3.2 flash drive typically writes at 50–200 MB/s.
About Kilobit per second (Kbps)
A kilobit per second (kbps or kb/s) equals 1,000 bits per second in the SI decimal system. It was the standard unit for dial-up modem speeds throughout the 1990s — 28.8 kbps and 56 kbps modems defined home internet access for a generation. Today kbps persists in audio codec specifications: MP3 files are typically encoded at 128–320 kbps, and voice calls over IP use 8–64 kbps codecs. DSL connections still quote upstream speeds in the low hundreds of kbps for basic plans.
A 56 kbps dial-up modem could transfer about 7 kB per second — downloading a 1 MB image took around two minutes. An MP3 at 128 kbps uses 1 MB per minute of audio.
Megabyte per second – Frequently Asked Questions
Why does copying files to a USB drive slow down partway through?
Many USB drives use a small SLC cache for initial writes at high MB/s, then slow dramatically once the cache fills and data writes to slower TLC/QLC NAND. A drive that starts at 200 MB/s might drop to 20–30 MB/s after the first few gigabytes. Check sustained write speed reviews, not just peak numbers.
What MB/s do I need for video editing?
Editing 4K ProRes footage requires about 200–400 MB/s of sustained read speed. 8K RAW can demand 1,000+ MB/s. A SATA SSD (550 MB/s) handles 4K fine, but 8K workflows really need NVMe drives at 3,000+ MB/s. The timeline scrubbing experience directly correlates with MB/s.
How do I tell if a speed test result is in MB/s or Mbps?
Look at the capitalisation: lowercase "b" (Mbps) means megabits, uppercase "B" (MB/s) means megabytes. Most speed test websites (Speedtest by Ookla, fast.com) default to Mbps. If your result seems 8× lower than expected, you are probably reading MB/s where you expected Mbps.
What is the fastest consumer storage in MB/s as of 2026?
PCIe 5.0 NVMe SSDs hit 12,000–14,000 MB/s sequential read speeds. That is fast enough to load an entire 50 GB game in about 4 seconds. PCIe 6.0 drives, expected soon, will double this again to roughly 25,000 MB/s.
Why is network file sharing slower than local disk speed?
Network transfers add latency, protocol overhead (SMB, NFS), and are limited by the network link speed. A file on a local NVMe SSD reads at 7,000 MB/s, but sharing it over a 1 Gbps network caps throughput at 125 MB/s. Even 10 GbE only gives 1,250 MB/s — a fraction of modern SSD capability.
Kilobit per second – Frequently Asked Questions
Why are MP3 bitrates measured in kbps?
Audio codecs compress sound into a stream of bits played back in real time, so the natural unit is bits per second. At 128 kbps, an MP3 encoder allocates 128,000 bits to represent each second of audio. Higher kbps means more data per second, better quality, and larger files.
Can you still use a 56 kbps dial-up connection in 2026?
Technically yes — dial-up ISPs like NetZero still exist in the US, and some rural areas with no broadband rely on them. But at 56 kbps, loading a modern webpage (average 2.5 MB) would take over 5 minutes. It is functionally unusable for anything beyond basic email.
What is the difference between 128 kbps and 320 kbps MP3?
At 128 kbps, the encoder discards more audio detail — cymbals sound washy, stereo imaging narrows, and quiet passages lose nuance. At 320 kbps, most listeners cannot distinguish the MP3 from the original CD in blind tests. The file is 2.5× larger but audibly transparent to most ears.
How many kbps does a phone call use?
A standard VoIP call uses 8–64 kbps depending on the codec. The widely used Opus codec delivers excellent voice quality at 16–32 kbps. Traditional landline phone calls used 64 kbps (G.711 codec). HD Voice on modern smartphones uses about 32 kbps with the AMR-WB codec.
Why did dial-up internet make that screeching noise?
The screeching was the modem handshake — two modems negotiating their connection speed by exchanging test tones over the phone line. Each phase of the screech tested different frequencies and protocols. The modems were literally talking to each other in audio, finding the fastest kbps rate the line could support.