Block to Mebibyte

Modern hard drives (2011+) and SSDs use 4,096-byte (4 KiB) physical sectors — known as "Advanced Format" or AF. Legacy drives used 512-byte sectors. Filesystems (NTFS, ext4, APFS) typically use 4 KiB logical block sizes to match physical sectors, which avoids the performance penalty of misaligned writes. Enterprise SSDs may use larger block sizes (16 KiB or more) for better parallelism.

Cloud block storage services (AWS EBS, Azure Managed Disks, GCP Persistent Disk) use I/O block sizes typically of 4 KiB or 16 KiB. Performance is measured in IOPS (I/O operations per second) and throughput (MB/s) — both depend on block size. A throughput-optimized workload (sequential video) benefits from large blocks; an IOPS-optimized workload (database random reads) uses small blocks.

Filesystems allocate disk space in whole blocks. On a system with 4 KiB blocks, every file — no matter how small — occupies at least 4,096 bytes. A directory of 10,000 small configuration files (each 100 bytes of content) uses 40 MB of disk space (10,000 × 4,096 bytes) rather than 1 MB (10,000 × 100 bytes). This is called "block slack" or "internal fragmentation".

Disk blocks (filesystem blocks) are typically 512 bytes to 4 KiB. Database blocks (database pages) are the unit of I/O for a database engine — typically 8 KiB (PostgreSQL, SQL Server), 16 KiB (MySQL InnoDB), or 32 KiB (Oracle, configurable). Database blocks usually align to multiples of disk blocks for efficiency. Reading one database page may involve reading 2–8 disk blocks.

RAID stripe size (or chunk size) is the amount of data written to each drive before moving to the next drive in the array — typically 64 KiB to 512 KiB. It should be set to match your workload: sequential large-file workloads benefit from larger stripe sizes; random small-block workloads benefit from stripe sizes closer to the filesystem block size. Mismatched stripe and block sizes cause write amplification and reduce RAID performance.

MB (megabyte) = 1,000,000 bytes (SI decimal). MiB (mebibyte) = 1,048,576 bytes (IEC binary). MiB is 4.86% larger. This gap is why a file manager on Linux showing "512 MiB" of free RAM and a marketing sheet showing "512 MB" of RAM are technically different: the marketing sheet refers to fewer bytes.

The original CD-ROM standard defined capacity as 74 minutes of audio or 650,000,000 bytes. Technically this is 650 MB in SI terms, or approximately 620 MiB (since 650,000,000 ÷ 1,048,576 ≈ 620). However, the CD industry loosely used "MB" to mean 650 × 10⁶ bytes. Some media used 700 MB (≈ 668 MiB). This inconsistency is a classic example of the pre-IEC ambiguity.

Docker reports image sizes in decimal MB (e.g., "docker images" shows 150 MB), but the underlying layer storage on disk uses binary-aligned block sizes. A "150 MB" Docker image actually occupies roughly 143 MiB on disk before compression. Compressed layers further complicate things: a 150 MB uncompressed image might only transfer 50 MB over the network. Container registries like Docker Hub display compressed sizes, while "docker images" shows uncompressed — leading to frequent confusion in CI/CD pipeline size budgets.

One mebibyte (1,048,576 bytes) holds about: one minute of MP3 audio at 128 kbps (≈ 960 kB, so slightly under 1 MiB), a medium-resolution JPEG photo (0.5–2 MiB), about 200 pages of plain text, or the complete text of a short novel. A typical Linux kernel image at boot is 8–12 MiB compressed.

RAM chips are physically organized as binary address grids — each address line doubles the capacity, so sizes must be exact powers of 2 (4 GiB = 2³² bytes, 8 GiB = 2³³ bytes). USB flash drives use NAND flash that is also binary internally, but manufacturers reserve variable amounts for wear levelling, bad block management, and controller firmware. A "64 GB" USB drive might have 64 GiB of raw NAND but only expose 59.6 GiB (64 × 10⁹ ÷ 2³⁰) to the user — the label uses decimal marketing, unlike RAM which honestly reflects binary sizing.