Byte to Megabit

A byte contains exactly 8 bits. This is the universal modern standard, though early computing used variable byte sizes (5, 6, or 7 bits). The 8-bit byte became universal with the IBM System/360 in 1964. Eight bits allow 256 possible values (0–255), sufficient to encode all ASCII characters with room for control codes.

Eight bits became standard because it is the smallest power of two that can encode all 128 ASCII characters (7 bits) with a spare bit for parity checking or extended character sets. It also maps cleanly to two hexadecimal digits (0x00–0xFF), making it convenient for low-level programming and hardware design. Earlier systems used 6-bit or 7-bit bytes; 8-bit won due to IBM's dominance in the 1960s–70s.

A nibble (also spelled nybble) is 4 bits — half a byte. A nibble represents exactly one hexadecimal digit (0–F). The term is used in low-level programming, embedded systems, and BCD (binary-coded decimal) encoding. It is not an SI unit and rarely appears in general computing contexts outside of hardware and systems programming.

It depends on the character and encoding. In UTF-8 (the dominant web encoding): ASCII characters (A–Z, 0–9) use 1 byte; common European accented characters use 2 bytes; most Asian scripts (Chinese, Japanese, Korean) use 3 bytes; emoji and rare characters use 4 bytes. A plain English text file is efficiently encoded as 1 byte per character in UTF-8.

In most modern usage, byte and octet are synonymous — both mean 8 bits. "Octet" is preferred in networking standards (RFC documents, ITU specifications) to avoid ambiguity from early computing where byte sizes varied. Internet protocol headers are specified in octets; operating systems and storage devices use bytes. In practice you will encounter "octet" mainly in formal networking documentation.

Divide Mbps by 8 to get megabytes per second (MB/s). A 100 Mbps connection = 12.5 MB/s. A 1 Gbps connection = 125 MB/s. This conversion is essential when comparing advertised internet speeds (always in Mbps) to actual file download speeds (shown in MB/s by browsers and download managers).

Netflix recommends 25 Mbps for 4K Ultra HD. Disney+ and Apple TV+ recommend 25 Mbps; YouTube recommends 20 Mbps for 4K. These are per-stream figures — a household streaming two 4K sources simultaneously needs roughly 50 Mbps of reliable throughput, plus headroom for other devices.

ISP speed ratings are theoretical maximums under ideal conditions. Real-world factors include network congestion, router quality, Wi-Fi interference, the server's upload speed, and protocol overhead. Additionally, browsers and download managers report speeds in MB/s (bytes), which is 8× smaller than the Mbps figure — a 100 Mbps plan showing 11 MB/s in a browser is performing normally.

One gigabit equals 1,000 megabits (SI decimal system). Gigabit broadband (1 Gbps) = 1,000 Mbps = 125 MB/s theoretical download speed. In the binary IEC system, one gibibit = 1,024 mebibits — but for internet speeds the SI decimal values are always used.

Fiber-to-the-home (FTTH) delivers symmetric speeds of 100–10,000 Mbps with consistent performance regardless of distance from the exchange. Cable (DOCSIS 3.1) offers 100–1,200 Mbps download but typically 10–50 Mbps upload, and throughput degrades during neighborhood peak hours due to shared bandwidth. DSL (VDSL2) maxes out at 50–100 Mbps download and drops sharply beyond 500 meters from the DSLAM cabinet. In practice, most cable users see 60–80% of advertised speeds; DSL users at distance may see under 50%. Fiber is the only technology that reliably delivers its rated megabit throughput.