Exabit to Gigabit

Eb

1 Eb

Gb

1,000,000,000 Gb

Conversion History

ConversionReuseDelete

1 Eb (Exabit) → 1000000000 Gb (Gigabit)

Just now

Entries per page:

1–1 of 1


Quick Reference Table (Exabit to Gigabit)

Exabit (Eb)Gigabit (Gb)
0.0011,000,000
0.0110,000,000
0.1100,000,000
11,000,000,000
1010,000,000,000
100100,000,000,000

About Exabit (Eb)

An exabit (Eb or Ebit) equals 10¹⁸ bits (1,000 petabits) in the SI system. The exabit is used for describing cumulative global internet traffic volumes over time periods (months or years) and theoretical maximum capacity of entire communication network infrastructures. It sits at the current practical ceiling of data storage and transmission measurement for human-scale systems. Above the exabit, the zettabit (10²¹ bits) and yottabit (10²⁴ bits) exist as SI units but have no current practical application in networking or storage.

Global monthly internet traffic exceeded 400 exabytes in 2022. The total data stored globally is estimated at roughly 100–300 exabytes.

About Gigabit (Gb)

A gigabit (Gb or Gbit) equals 1,000,000,000 bits (10⁹ bits) in the SI system. It is the standard unit for high-speed networking: home broadband is marketed in gigabits (1 Gbps, 2.5 Gbps), data center switches operate at 10–400 Gbps, and optical fiber backbone links run at terabit speeds. Network interface cards (NICs) in modern computers and servers are typically rated at 1 Gbps or 10 Gbps. A 1 Gbps link can transfer roughly 125 MB per second — sufficient to copy a 1 GB file in about 8 seconds under ideal conditions.

A 1 Gbps home broadband plan delivers up to 125 MB/s download speed. Most modern ethernet ports on laptops support 1 Gbps.


Exabit – Frequently Asked Questions

One exabit = 10¹⁸ bits = 125,000 terabytes = 125 petabytes. If every person on Earth (8 billion people) each stored 15 GB of data — roughly a modern smartphone's photos and messages — the total would be about 120 exabytes, or about 960 exabits. The entire human genome is about 1.5 GB; sequencing every person on Earth would produce about 12 exabytes of data.

Cisco's annual internet traffic reports estimated global IP traffic at roughly 4.8 exabytes per day in 2022, rising about 20% per year. Expressed in bits, that's about 38 exabits per day or roughly 440 petabits per second continuously. Video streaming accounts for over 60% of total internet traffic volume.

Data gravity is the principle that massive datasets attract applications, services, and additional data toward them — rather than being moved to where processing occurs. At exabit scale, physically transferring data becomes impractical: moving 1 exabit over a 100 Gbps link takes 116 days. Instead, companies deploy compute resources alongside the data. This effect drives cloud concentration — once an organisation stores exabits in AWS or Azure, the cost and latency of moving that data elsewhere creates powerful vendor lock-in, shaping the economics of the entire cloud industry.

The Square Kilometer Array (SKA), under construction in Australia and South Africa, will be the world's largest radio telescope. Its thousands of antennas will collectively produce roughly 1 exabit of raw sensor data per day — more than the entire global internet traffic of the early 2000s. This data cannot be stored in full; instead, on-site supercomputers reduce it by a factor of ~10,000 in real time, keeping only scientifically relevant signals. The SKA illustrates how radio astronomy pushes data processing to extreme scales that rival commercial internet infrastructure.

At 1 Gbps (a fast home connection), downloading 1 exabit would take 1 billion seconds — about 31.7 years. At 1 Tbps (a high-end data center link), it would take 1 million seconds, or about 11.6 days. This illustrates why exabit-scale data movements require massively parallel infrastructure — no single link or device handles exabit transfers directly.

Gigabit – Frequently Asked Questions

1 Gbps (gigabit) broadband delivers up to 125 MB/s, which is more than sufficient for most households. It supports dozens of simultaneous 4K streams, fast game downloads, and video conferencing with headroom to spare. The limiting factor is usually the Wi-Fi router (Wi-Fi 5 maxes out around 400–600 Mbps in practice) or the speed of the remote server you're downloading from.

10 Gbps networking is standard in data centers, server interconnects, and high-performance workstations doing large file transfers (video editing, database backups). It is increasingly available in prosumer home networking equipment. At 10 Gbps, a 1 TB file transfer takes about 13 minutes under ideal conditions.

One terabit equals 1,000 gigabits (SI). Terabit-per-second (Tbps) speeds are used in long-haul fiber optic cables and internet backbone infrastructure. A single transatlantic fiber cable typically carries hundreds of terabits per second across many multiplexed channels.

Wi-Fi 5 (802.11ac) delivers up to 3.5 Gbps theoretical, but typically 400–600 Mbps real-world on a single device. Wi-Fi 6 (802.11ax) reaches 9.6 Gbps theoretical and 600–900 Mbps practical per device, with better multi-device handling via OFDMA. Wi-Fi 6E extends the same technology into the uncongested 6 GHz band, improving real-world speeds to 1–2 Gbps. Wi-Fi 7 (802.11be) pushes the theoretical maximum to 46 Gbps using 320 MHz channels and 4096-QAM, with real-world single-device speeds expected around 2–5 Gbps — the first Wi-Fi standard to reliably exceed gigabit in practice.

Modern data centers handle enormous simultaneous traffic between thousands of servers — cloud computing, video streaming, and AI training all require massive internal bandwidth. 100 Gbps links between switches are now standard; 400 Gbps is increasingly deployed for spine connections. At these speeds, a single link can move 50 GB of data per second, keeping pace with NVMe storage arrays and GPU memory transfer rates.

© 2026 TopConverters.com. All rights reserved.