Exabit to Megabit

One exabit = 10¹⁸ bits = 125,000 terabytes = 125 petabytes. If every person on Earth (8 billion people) each stored 15 GB of data — roughly a modern smartphone's photos and messages — the total would be about 120 exabytes, or about 960 exabits. The entire human genome is about 1.5 GB; sequencing every person on Earth would produce about 12 exabytes of data.

Cisco's annual internet traffic reports estimated global IP traffic at roughly 4.8 exabytes per day in 2022, rising about 20% per year. Expressed in bits, that's about 38 exabits per day or roughly 440 petabits per second continuously. Video streaming accounts for over 60% of total internet traffic volume.

Data gravity is the principle that massive datasets attract applications, services, and additional data toward them — rather than being moved to where processing occurs. At exabit scale, physically transferring data becomes impractical: moving 1 exabit over a 100 Gbps link takes 116 days. Instead, companies deploy compute resources alongside the data. This effect drives cloud concentration — once an organisation stores exabits in AWS or Azure, the cost and latency of moving that data elsewhere creates powerful vendor lock-in, shaping the economics of the entire cloud industry.

The Square Kilometer Array (SKA), under construction in Australia and South Africa, will be the world's largest radio telescope. Its thousands of antennas will collectively produce roughly 1 exabit of raw sensor data per day — more than the entire global internet traffic of the early 2000s. This data cannot be stored in full; instead, on-site supercomputers reduce it by a factor of ~10,000 in real time, keeping only scientifically relevant signals. The SKA illustrates how radio astronomy pushes data processing to extreme scales that rival commercial internet infrastructure.

At 1 Gbps (a fast home connection), downloading 1 exabit would take 1 billion seconds — about 31.7 years. At 1 Tbps (a high-end data center link), it would take 1 million seconds, or about 11.6 days. This illustrates why exabit-scale data movements require massively parallel infrastructure — no single link or device handles exabit transfers directly.

Divide Mbps by 8 to get megabytes per second (MB/s). A 100 Mbps connection = 12.5 MB/s. A 1 Gbps connection = 125 MB/s. This conversion is essential when comparing advertised internet speeds (always in Mbps) to actual file download speeds (shown in MB/s by browsers and download managers).

Netflix recommends 25 Mbps for 4K Ultra HD. Disney+ and Apple TV+ recommend 25 Mbps; YouTube recommends 20 Mbps for 4K. These are per-stream figures — a household streaming two 4K sources simultaneously needs roughly 50 Mbps of reliable throughput, plus headroom for other devices.

ISP speed ratings are theoretical maximums under ideal conditions. Real-world factors include network congestion, router quality, Wi-Fi interference, the server's upload speed, and protocol overhead. Additionally, browsers and download managers report speeds in MB/s (bytes), which is 8× smaller than the Mbps figure — a 100 Mbps plan showing 11 MB/s in a browser is performing normally.

One gigabit equals 1,000 megabits (SI decimal system). Gigabit broadband (1 Gbps) = 1,000 Mbps = 125 MB/s theoretical download speed. In the binary IEC system, one gibibit = 1,024 mebibits — but for internet speeds the SI decimal values are always used.

Fiber-to-the-home (FTTH) delivers symmetric speeds of 100–10,000 Mbps with consistent performance regardless of distance from the exchange. Cable (DOCSIS 3.1) offers 100–1,200 Mbps download but typically 10–50 Mbps upload, and throughput degrades during neighborhood peak hours due to shared bandwidth. DSL (VDSL2) maxes out at 50–100 Mbps download and drops sharply beyond 500 meters from the DSLAM cabinet. In practice, most cable users see 60–80% of advertised speeds; DSL users at distance may see under 50%. Fiber is the only technology that reliably delivers its rated megabit throughput.