Exbibit to Pebibyte
Eib
PiB
Conversion History
| Conversion | Reuse | Delete |
|---|---|---|
1 Eib (Exbibit) → 128.00000000000000266454 PiB (Pebibyte) Just now |
Quick Reference Table (Exbibit to Pebibyte)
| Exbibit (Eib) | Pebibyte (PiB) |
|---|---|
| 0.0001 | 0.01280000000000000027 |
| 0.001 | 0.12800000000000000266 |
| 0.01 | 1.28000000000000002665 |
| 0.1 | 12.80000000000000026645 |
| 1 | 128.00000000000000266454 |
About Exbibit (Eib)
An exbibit (Eibit) equals exactly 2⁶⁰ bits (1,152,921,504,606,846,976 bits) in the IEC binary system. It is approximately 15.29% larger than the decimal exabit (10¹⁸ bits). The exbibit sits at the top of currently practical IEC binary bit units for data storage and network specifications. It corresponds to exactly 128 PiB (pebibytes). At this scale, the 15.3% gap between SI and IEC units represents over 170 petabits of absolute difference per unit — the most practically significant discrepancy in the SI/IEC comparison for bit-based units.
The theoretical maximum aggregate bandwidth of a planned exascale supercomputer's storage fabric may be expressed in exbibits per second in academic design papers.
About Pebibyte (PiB)
A pebibyte (PiB) equals exactly 1,125,899,906,842,624 bytes (2⁵⁰ bytes) in the IEC binary system. It is 12.59% larger than the decimal petabyte (10¹⁵ bytes). The pebibyte is the storage unit for hyperscale data centers, supercomputer storage systems, and large backup infrastructure. Organisations at petabyte scale — cloud providers, scientific research institutions, video platforms — track capacity in PiB for precise binary accounting. The 12.6% difference from the decimal PB means that a 10 PiB storage cluster differs from a 10 PB cluster by over 1.26 PB of actual bytes.
The Large Hadron Collider at CERN stores approximately 15 PB per year, or about 13.3 PiB. Large cloud object stores are sized and priced in PiB.
Exbibit – Frequently Asked Questions
What is the difference between exabit and exbibit?
An exabit (Ebit) = 10¹⁸ bits (SI decimal). An exbibit (Eibit) = 2⁶⁰ bits ≈ 1.1529 × 10¹⁸ bits (IEC binary). Exbibit is 15.29% larger — the cumulative product of using 1,024 instead of 1,000 at each of six prefix steps. This is the largest practically relevant SI vs IEC gap for bit units in current storage contexts.
Does anyone actually use exbibits?
Exbibit is used in: computer science academic literature on exascale computing, theoretical storage system design papers, and formal IEC/IEEE standards. No commercial product, OS, or consumer application currently displays exbibits. It is primarily a unit for academic and standards consistency — ensuring the IEC prefix family extends uniformly from kibi- to exbi- (and beyond to zebi- and yobi-).
What comes after exbibit in the IEC binary system?
After exbibit (Eibit, 2⁶⁰ bits) come: zebibit (Zibit, 2⁷⁰ bits) and yobibit (Yibit, 2⁸⁰ bits). These are defined in the IEC 80000-13 standard but have no current practical applications. The IEC binary prefix family deliberately mirrors the SI prefix family, ensuring consistent naming as computing scale continues to grow.
How much data do exascale supercomputers like Frontier and Aurora move?
Frontier (Oak Ridge, 2022) achieved 1.194 exaFLOPS, with its Slingshot-11 fabric moving data at aggregate rates measurable in exbibits per second across 9,408 nodes. Aurora (Argonne, 2024) targets similar throughput with over 63,000 GPUs. At these scales, a single checkpoint of a full-system simulation can exceed 1 Eibit of state data, making exbibit a natural unit for describing I/O bandwidth requirements.
Will data measurement standards need prefixes beyond yobi-?
The IEC currently defines up to yobibit (Yibit, 2⁸⁰ bits). In 2022, the SI system added ronna- (10²⁷) and quetta- (10³⁰), but the IEC has not yet created matching binary prefixes (ronnibit? quettibit?). With global data creation projected to exceed 1 yottabit annually by the 2030s, pressure is mounting for the IEC to extend the binary prefix family — though the naming convention ("ronnibi-"?) remains an open question.
Pebibyte – Frequently Asked Questions
What is the difference between PB and PiB?
PB (petabyte) = 10¹⁵ bytes = 1,000,000,000,000,000 bytes (SI decimal). PiB (pebibyte) = 2⁵⁰ bytes = 1,125,899,906,842,624 bytes (IEC binary). PiB is 12.59% larger. For a data center purchasing 100 PiB of raw storage, the SI vs IEC confusion would represent approximately 12.59 PB of missing or unexpected capacity.
What organisations operate at pebibyte scale?
Cloud providers (AWS, Azure, GCP) operate at exabyte scale but provision and bill individual customers at PiB scale for enterprise storage. Scientific computing facilities like CERN, the Square Kilometer Array telescope project, and US national laboratories store tens to hundreds of PiB. Large video platforms (Netflix, YouTube) store hundreds of PiB of encoded video content.
How many hard drives fill a pebibyte?
Using 20 TB drives (a 2024 high-density consumer drive): 1 PiB = 1,125,899,906,842,624 bytes ÷ 20,000,000,000,000 bytes/drive ≈ 56.3 drives. So roughly 57 × 20 TB drives to fill 1 PiB. In a data center using 60-drive storage shelves, one shelf of 60 × 20 TB drives provides about 1.07 PiB of raw capacity.
Why do data centers still use magnetic tape for PiB-scale storage?
Magnetic tape (LTO technology) remains the dominant medium for cold storage at PiB scale due to economics and durability. An LTO-9 cartridge holds 18 TB (uncompressed) and costs roughly $100 — about $5.50 per TB, versus $15–20 per TB for HDDs. Tape also consumes zero power when idle, unlike spinning disks. The IBM TS4500 tape library can hold over 40 PiB in a single rack. Major users include CERN, national archives, and film studios — Netflix stores its master copies on tape. Tape's main downside is sequential access: retrieving a specific file can take minutes versus milliseconds for disk.
What is CERN's data storage scale?
CERN's Worldwide LHC Computing Grid stores approximately 300–400 PB (petabytes, decimal) of data across distributed sites, with the main Tier-0 facility at CERN holding about 100 PB on disk and 200 PB on tape. The LHC generates roughly 15 PB of data per year from collision events. Future upgrades (High-Luminosity LHC) are projected to increase this to 50–100 PB per year.