Exbibit to Terabit

An exabit (Ebit) = 10¹⁸ bits (SI decimal). An exbibit (Eibit) = 2⁶⁰ bits ≈ 1.1529 × 10¹⁸ bits (IEC binary). Exbibit is 15.29% larger — the cumulative product of using 1,024 instead of 1,000 at each of six prefix steps. This is the largest practically relevant SI vs IEC gap for bit units in current storage contexts.

Exbibit is used in: computer science academic literature on exascale computing, theoretical storage system design papers, and formal IEC/IEEE standards. No commercial product, OS, or consumer application currently displays exbibits. It is primarily a unit for academic and standards consistency — ensuring the IEC prefix family extends uniformly from kibi- to exbi- (and beyond to zebi- and yobi-).

After exbibit (Eibit, 2⁶⁰ bits) come: zebibit (Zibit, 2⁷⁰ bits) and yobibit (Yibit, 2⁸⁰ bits). These are defined in the IEC 80000-13 standard but have no current practical applications. The IEC binary prefix family deliberately mirrors the SI prefix family, ensuring consistent naming as computing scale continues to grow.

Frontier (Oak Ridge, 2022) achieved 1.194 exaFLOPS, with its Slingshot-11 fabric moving data at aggregate rates measurable in exbibits per second across 9,408 nodes. Aurora (Argonne, 2024) targets similar throughput with over 63,000 GPUs. At these scales, a single checkpoint of a full-system simulation can exceed 1 Eibit of state data, making exbibit a natural unit for describing I/O bandwidth requirements.

The IEC currently defines up to yobibit (Yibit, 2⁸⁰ bits). In 2022, the SI system added ronna- (10²⁷) and quetta- (10³⁰), but the IEC has not yet created matching binary prefixes (ronnibit? quettibit?). With global data creation projected to exceed 1 yottabit annually by the 2030s, pressure is mounting for the IEC to extend the binary prefix family — though the naming convention ("ronnibi-"?) remains an open question.

One terabit per second (Tbps) equals 125 gigabytes per second — enough to transfer the entire contents of a 1 TB hard drive in about 8 seconds. At this speed, you could download the entire Netflix library (estimated at around 100 petabytes) in roughly 800,000 seconds, or about 9 days.

Submarine fiber optic cables (such as the transatlantic cables connecting Europe and the Americas), long-haul terrestrial fiber routes, and the internal switching fabric of the largest hyperscale cloud data centers (Google, Amazon, Microsoft) operate at terabit and multi-terabit speeds. These use wavelength-division multiplexing (WDM) to carry many 100 Gbps or 400 Gbps channels on a single fiber.

Not in the foreseeable future for a single household connection. Current consumer endpoints (laptops, phones, TVs) cannot process or use data at terabit speeds — Wi-Fi 7 tops out around 46 Gbps theoretically. Terabit access would require new hardware at every endpoint. The practical benefit would be minimal since content servers themselves are not yet able to deliver at terabit rates to a single user.

Global internet traffic is measured in exabytes per month. Estimates suggest the internet backbone carries over 1,000 Tbps (1 Pbps) in aggregate during peak hours. Major internet exchange points (IXPs) like DE-CIX in Frankfurt regularly see peak traffic above 10 Tbps, and the largest cloud providers' internal networks operate at multi-petabit scales.

Current 5G mmWave cells can deliver up to 10–20 Gbps aggregate capacity shared among users in a sector. Industry roadmaps for 6G (targeted around 2030) aim for 1 Tbps aggregate throughput per cell site using sub-terahertz frequencies (100–300 GHz), massive MIMO antenna arrays, and intelligent reflecting surfaces. Achieving terabit wireless capacity requires extremely dense small-cell deployments — potentially one access point every 50–100 meters in urban areas.