Gibibit to Exbibyte

A gigabit (Gbit) = 10⁹ bits = 1,000,000,000 bits (SI). A gibibit (Gibit) = 2³⁰ bits = 1,073,741,824 bits (IEC binary). The difference is 7.37%. Consumer networking equipment and ISP speed ratings use decimal gigabits; memory and chip designers sometimes use gibibits when binary precision is required.

Virtually all networking equipment — routers, switches, NICs, ISP speed ratings — uses decimal gigabits (Gbit). A "1 Gbps" (gigabit per second) connection means exactly 1,000,000,000 bits per second, not 1,073,741,824 bits per second. Network standards (Ethernet IEEE 802.3) are defined in SI units.

DDR memory bandwidth is calculated from clock speed, bus width, and transfers per clock. A DDR5-4800 module on a 64-bit bus delivers 4,800 MT/s × 64 bits = 307,200 Mbit/s ≈ 292.97 Gibit/s. Engineers use gibibits when verifying that memory throughput matches binary-aligned cache line sizes (typically 512 bits = 64 bytes), ensuring no fractional transfers occur during burst reads.

GPU memory bandwidth is typically quoted in gigabytes per second (GB/s) using SI decimal values — not gibibits. For example, NVIDIA's RTX 4090 has 1,008 GB/s of memory bandwidth (decimal). Some academic papers and IEEE publications convert this to GiB/s or Gibit/s for precision, but consumer GPU marketing universally uses SI decimal units.

Gibibit appears in: IEEE standards documents specifying memory interface speeds, JEDEC memory specifications, some academic networking papers, and storage controller datasheets. Consumer-facing software, marketing materials, and OS interfaces virtually never display gibibits — they show gigabits (networking) or gigabytes (storage). It is primarily a precision engineering unit.

EB (exabyte) = 10¹⁸ bytes (SI decimal). EiB (exbibyte) = 2⁶⁰ bytes = 1,152,921,504,606,846,976 bytes (IEC binary). EiB is 15.29% larger. This is the largest practically significant SI vs IEC discrepancy: per exbibyte, the binary value exceeds the decimal value by approximately 152,921,504,606,846,976 bytes — about 152.9 petabytes.

One exbibyte (EiB) ≈ 1.153 × 10¹⁸ bytes = 1,073,741,824 GiB = 1,048,576 TiB. In practical terms: enough to store approximately 230 billion JPEG photos at 5 MB each, or 288,230,376 copies of a 4 GB HD movie, or the entire text content of the English internet many thousands of times over.

In theory, yes — and with astonishing density. DNA can encode about 215 PiB per gram of material, meaning a single EiB could fit in roughly 4.7 grams of synthetic DNA. Researchers at Microsoft and the University of Washington have demonstrated writing and reading megabytes of data in DNA strands. The challenges are speed and cost: current DNA synthesis writes about 400 bytes per second and costs around $3,500 per megabyte. At that rate, writing 1 EiB would take billions of years and cost more than global GDP. However, enzymatic synthesis breakthroughs could reduce costs by 6–8 orders of magnitude within decades.

Storing 1 EiB on modern HDDs would require roughly 57,000 drives of 20 TB each, consuming about 400–500 kW of power just for the drives — plus 200–300 kW for cooling, networking, and overhead. That totals roughly 6 GWh per year, equivalent to powering about 550 US homes. At typical US grid carbon intensity, this produces around 2,500 tonnes of CO₂ annually. Hyperscale operators reduce this via renewable energy and immersion cooling, but the fundamental physics of spinning magnetic platters or maintaining NAND charge states sets a floor on energy consumption that no software optimisation can eliminate.

After exbibyte (EiB, 2⁶⁰ bytes) come: zebibyte (ZiB, 2⁷⁰ bytes) and yobibyte (YiB, 2⁸⁰ bytes), as defined in IEC 80000-13. These are recognized standard units but have no current practical applications. The entire global internet's estimated stored data (hundreds of EB) is still in the low hundreds of EiB range — well short of one ZiB.