Terabit to Megabit

One terabit per second (Tbps) equals 125 gigabytes per second — enough to transfer the entire contents of a 1 TB hard drive in about 8 seconds. At this speed, you could download the entire Netflix library (estimated at around 100 petabytes) in roughly 800,000 seconds, or about 9 days.

Submarine fiber optic cables (such as the transatlantic cables connecting Europe and the Americas), long-haul terrestrial fiber routes, and the internal switching fabric of the largest hyperscale cloud data centers (Google, Amazon, Microsoft) operate at terabit and multi-terabit speeds. These use wavelength-division multiplexing (WDM) to carry many 100 Gbps or 400 Gbps channels on a single fiber.

Not in the foreseeable future for a single household connection. Current consumer endpoints (laptops, phones, TVs) cannot process or use data at terabit speeds — Wi-Fi 7 tops out around 46 Gbps theoretically. Terabit access would require new hardware at every endpoint. The practical benefit would be minimal since content servers themselves are not yet able to deliver at terabit rates to a single user.

Global internet traffic is measured in exabytes per month. Estimates suggest the internet backbone carries over 1,000 Tbps (1 Pbps) in aggregate during peak hours. Major internet exchange points (IXPs) like DE-CIX in Frankfurt regularly see peak traffic above 10 Tbps, and the largest cloud providers' internal networks operate at multi-petabit scales.

Current 5G mmWave cells can deliver up to 10–20 Gbps aggregate capacity shared among users in a sector. Industry roadmaps for 6G (targeted around 2030) aim for 1 Tbps aggregate throughput per cell site using sub-terahertz frequencies (100–300 GHz), massive MIMO antenna arrays, and intelligent reflecting surfaces. Achieving terabit wireless capacity requires extremely dense small-cell deployments — potentially one access point every 50–100 meters in urban areas.

Divide Mbps by 8 to get megabytes per second (MB/s). A 100 Mbps connection = 12.5 MB/s. A 1 Gbps connection = 125 MB/s. This conversion is essential when comparing advertised internet speeds (always in Mbps) to actual file download speeds (shown in MB/s by browsers and download managers).

Netflix recommends 25 Mbps for 4K Ultra HD. Disney+ and Apple TV+ recommend 25 Mbps; YouTube recommends 20 Mbps for 4K. These are per-stream figures — a household streaming two 4K sources simultaneously needs roughly 50 Mbps of reliable throughput, plus headroom for other devices.

ISP speed ratings are theoretical maximums under ideal conditions. Real-world factors include network congestion, router quality, Wi-Fi interference, the server's upload speed, and protocol overhead. Additionally, browsers and download managers report speeds in MB/s (bytes), which is 8× smaller than the Mbps figure — a 100 Mbps plan showing 11 MB/s in a browser is performing normally.

One gigabit equals 1,000 megabits (SI decimal system). Gigabit broadband (1 Gbps) = 1,000 Mbps = 125 MB/s theoretical download speed. In the binary IEC system, one gibibit = 1,024 mebibits — but for internet speeds the SI decimal values are always used.

Fiber-to-the-home (FTTH) delivers symmetric speeds of 100–10,000 Mbps with consistent performance regardless of distance from the exchange. Cable (DOCSIS 3.1) offers 100–1,200 Mbps download but typically 10–50 Mbps upload, and throughput degrades during neighborhood peak hours due to shared bandwidth. DSL (VDSL2) maxes out at 50–100 Mbps download and drops sharply beyond 500 meters from the DSLAM cabinet. In practice, most cable users see 60–80% of advertised speeds; DSL users at distance may see under 50%. Fiber is the only technology that reliably delivers its rated megabit throughput.