British Thermal Units (IT) to Grams of TNT

BTU/hour expresses cooling or heating power, not energy alone. A 12,000 BTU(IT)/h rating corresponds to approximately 3,517 W of thermal power. Watts can describe thermal power as well as electrical input; the two quantities must not be confused. An air conditioner's electrical input depends on its efficiency and operating conditions, rather than being the same as its cooling capacity.

A rough rule of thumb is 20 BTU per square foot of living space in a temperate climate. A 300 sq ft bedroom needs about 6,000 BTU/h; a 1,500 sq ft open-plan living area needs roughly 30,000 BTU/h. Actual requirements vary with insulation, ceiling height, climate zone, and window area. Poorly insulated older homes may need 30–40 BTU per square foot.

BTU is a unit of energy (heat); BTU/h is a unit of power (rate of heat flow). When an air conditioner is labelled "12,000 BTU," the industry shorthand actually means 12,000 BTU per hour. Technically one BTU equals about 1,055 joules of energy, while 1 BTU/h equals about 0.293 watts. The distinction matters for energy calculations but is routinely blurred in product marketing.

Natural gas energy quantities may be billed in millions of BTU (MMBtu) or therms. A therm nominally represents 100,000 BTU, but the legal U.S. and EC therm variants have their own fixed joule definitions. This converter keeps those therm variants separate; neither should be assumed to equal exactly 100,000 BTU(IT). Always check the unit convention used on the bill.

The UK metricated energy units in the 1970s–1990s, switching gas billing from therms (100,000 BTU) to kilowatt-hours and scientific work to joules. The "British" in BTU reflects 19th-century British steam engineering origins, not current usage. Today the BTU is almost exclusively an American unit, used for HVAC, gas pricing, and appliance ratings across the US.

By convention, exactly 4,184 joules — the same as one thermochemical kilocalorie. Real TNT detonation yields vary by about ±2% depending on purity and confinement, but the defined value provides a fixed reference point. This makes the gram of TNT a convenient bridge between chemistry (calories) and explosive engineering.

TNT (trinitrotoluene) became the reference explosive because it is chemically stable, safe to handle, and was massively produced during both World Wars. Its consistent detonation properties made it a natural benchmark. Other explosives are rated by their "TNT equivalent" — for example, C-4 is about 1.34× TNT and ANFO is about 0.74× TNT.

A standard US consumer firecracker contains about 0.5–1 gram of TNT equivalent in flash powder. An M-80 (now illegal for consumer sale) contained roughly 3 g of TNT equivalent. Cherry bombs were about 1.5 g. Commercially sold fireworks are regulated by the CPSC to contain no more than 50 mg of flash powder per report charge.

A US M67 fragmentation grenade contains about 180 g of Composition B explosive, which has a TNT equivalence of about 1.33×, giving roughly 240 grams of TNT equivalent. The lethal radius is about 5 meters, with a casualty-producing radius of 15 meters. The fragmentation — not the blast energy alone — is the primary wounding mechanism.

One gram of TNT releases exactly 1 thermochemical kilocalorie (1 kcal = 4,184 J) by definition. This means a dietary Calorie (nutritional kcal) contains the same energy as detonating one gram of TNT. A 2,000-Calorie daily diet is energetically equivalent to 2 kg of TNT — though your body releases that energy over 24 hours, not in microseconds.