British Thermal Units to Kilocalorie (th)

US HVAC manufacturers adopted BTU/hour because heating and cooling equipment historically measured heat removal or addition, not electrical input. A 12,000 BTU/h window unit removes 12,000 BTU of heat per hour from a room — that figure directly tells you the cooling capacity. Watts measure electrical power consumed, which is less due to the efficiency (EER) of the unit. The convention stuck because the entire US supply chain uses it.

A rough rule of thumb is 20 BTU per square foot of living space in a temperate climate. A 300 sq ft bedroom needs about 6,000 BTU/h; a 1,500 sq ft open-plan living area needs roughly 30,000 BTU/h. Actual requirements vary with insulation, ceiling height, climate zone, and window area. Poorly insulated older homes may need 30–40 BTU per square foot.

BTU is a unit of energy (heat); BTU/h is a unit of power (rate of heat flow). When an air conditioner is labelled "12,000 BTU," the industry shorthand actually means 12,000 BTU per hour. Technically one BTU equals about 1,055 joules of energy, while 1 BTU/h equals about 0.293 watts. The distinction matters for energy calculations but is routinely blurred in product marketing.

US natural gas is priced in dollars per million BTU (MMBtu) at the wholesale level and dollars per therm (100,000 BTU) on residential bills. One cubic foot of pipeline gas contains roughly 1,020 BTU. The Henry Hub benchmark price of $2.50/MMBtu means each therm costs about $0.25 wholesale — residential prices are higher after delivery and utility markups.

The UK metricated energy units in the 1970s–1990s, switching gas billing from therms (100,000 BTU) to kilowatt-hours and scientific work to joules. The "British" in BTU reflects 19th-century British steam engineering origins, not current usage. Today the BTU is almost exclusively an American unit, used for HVAC, gas pricing, and appliance ratings across the US.

Most foundational biochemical data — ATP hydrolysis (~7.3 kcal/mol), glucose oxidation (~686 kcal/mol), amino acid combustion values — were measured and published in kcal th before SI adoption. Rewriting decades of literature, lecture notes, and exam banks to kJ would introduce conversion errors and confusion. The field maintains kcal th by convention while acknowledging SI equivalents.

The standard free energy change (ΔG°) for ATP → ADP + Pi is approximately −7.3 kcal th/mol (−30.5 kJ/mol). Under actual cellular conditions, the value is closer to −12 to −14 kcal/mol because reactant and product concentrations differ from standard state. This energy drives muscle contraction, nerve impulses, protein synthesis, and virtually every energy-requiring process in living cells.

The classic Atwater factors (4 kcal/g carb, 4 kcal/g protein, 9 kcal/g fat) are averages from 19th-century bomb calorimetry, adjusted for digestibility. They can be off by 5–25% for specific foods. Almonds deliver ~20% fewer usable calories than labels claim because cell walls trap some fat from digestion. High-fiber foods also overcount. The FDA allows ±20% tolerance on label accuracy, so a "200 kcal" bar could legally contain 160–240 kcal.

Complete aerobic oxidation of one mole of glucose (C₆H₁₂O₆) releases approximately 686 kcal th (2,870 kJ). The human body captures about 38–40% of this in ATP; the rest dissipates as body heat. This is why exercise makes you warm — over half the food energy your muscles consume is released as thermal energy rather than mechanical work.

Fat molecules are highly reduced — their carbon atoms are bonded mostly to hydrogen, with very little oxygen. Oxidising them releases maximum energy because every C-H bond is converted to C=O and O-H bonds. Carbohydrates are already partially oxidised (they contain oxygen in their structure), so less additional oxidation is possible. Gram for gram, fat stores 2.25× more energy, which is why evolution favored fat as the body's long-term energy reserve — it packs the most kcal per gram of tissue weight.