Electron Volt to British Thermal Units (IT)

Because subatomic energies in joules have absurdly small exponents — a visible-light photon carries about 3 × 10⁻¹⁹ J, but a convenient 1.9 eV. The electron volt is scaled to the quantum world, making numbers human-readable. It also doubles as a mass unit (via E = mc²): a proton is 938.3 MeV/c², far easier to work with than 1.673 × 10⁻²⁷ kg.

Visible light photons range from about 1.65 eV (deep red, 750 nm) to 3.1 eV (violet, 400 nm). Green light, where the human eye is most sensitive, sits around 2.3 eV. Ultraviolet photons start at 3.1 eV and can exceed 100 eV in the extreme UV. These energies are why UV can damage DNA (breaking molecular bonds of 3–5 eV) while visible light cannot.

A semiconductor's bandgap — the minimum energy to free an electron from its bond — is expressed in eV. Silicon has a bandgap of 1.12 eV, gallium arsenide 1.42 eV, and gallium nitride 3.4 eV. The bandgap determines which wavelengths of light a solar cell can absorb and what color an LED emits. Lower bandgap means longer-wavelength (redder) light.

The LHC accelerates protons to 6.5 TeV (6.5 × 10¹² eV) per beam, giving collisions a center-of-mass energy of 13 TeV. That sounds enormous, but 13 TeV is only about 2 microjoules — the kinetic energy of a flying mosquito. The power of the LHC lies in concentrating that energy into a space a million times smaller than an atom.

Multiply by 1.602 176 634 × 10⁻¹⁹. So 1 eV = 1.602 × 10⁻¹⁹ J, 1 keV = 1.602 × 10⁻¹⁶ J, and 1 MeV = 1.602 × 10⁻¹³ J. This conversion factor is exactly the elementary charge in coulombs, because an electron volt is defined as the energy gained by one electron charge crossing one volt of potential.

BTU/hour expresses cooling or heating power, not energy alone. A 12,000 BTU(IT)/h rating corresponds to approximately 3,517 W of thermal power. Watts can describe thermal power as well as electrical input; the two quantities must not be confused. An air conditioner's electrical input depends on its efficiency and operating conditions, rather than being the same as its cooling capacity.

A rough rule of thumb is 20 BTU per square foot of living space in a temperate climate. A 300 sq ft bedroom needs about 6,000 BTU/h; a 1,500 sq ft open-plan living area needs roughly 30,000 BTU/h. Actual requirements vary with insulation, ceiling height, climate zone, and window area. Poorly insulated older homes may need 30–40 BTU per square foot.

BTU is a unit of energy (heat); BTU/h is a unit of power (rate of heat flow). When an air conditioner is labelled "12,000 BTU," the industry shorthand actually means 12,000 BTU per hour. Technically one BTU equals about 1,055 joules of energy, while 1 BTU/h equals about 0.293 watts. The distinction matters for energy calculations but is routinely blurred in product marketing.

Natural gas energy quantities may be billed in millions of BTU (MMBtu) or therms. A therm nominally represents 100,000 BTU, but the legal U.S. and EC therm variants have their own fixed joule definitions. This converter keeps those therm variants separate; neither should be assumed to equal exactly 100,000 BTU(IT). Always check the unit convention used on the bill.

The UK metricated energy units in the 1970s–1990s, switching gas billing from therms (100,000 BTU) to kilowatt-hours and scientific work to joules. The "British" in BTU reflects 19th-century British steam engineering origins, not current usage. Today the BTU is almost exclusively an American unit, used for HVAC, gas pricing, and appliance ratings across the US.