Grams of TNT to Inch-Ounce

By convention, exactly 4,184 joules — the same as one thermochemical kilocalorie. Real TNT detonation yields vary by about ±2% depending on purity and confinement, but the defined value provides a fixed reference point. This makes the gram of TNT a convenient bridge between chemistry (calories) and explosive engineering.

TNT (trinitrotoluene) became the reference explosive because it is chemically stable, safe to handle, and was massively produced during both World Wars. Its consistent detonation properties made it a natural benchmark. Other explosives are rated by their "TNT equivalent" — for example, C-4 is about 1.34× TNT and ANFO is about 0.74× TNT.

A standard US consumer firecracker contains about 0.5–1 gram of TNT equivalent in flash powder. An M-80 (now illegal for consumer sale) contained roughly 3 g of TNT equivalent. Cherry bombs were about 1.5 g. Commercially sold fireworks are regulated by the CPSC to contain no more than 50 mg of flash powder per report charge.

A US M67 fragmentation grenade contains about 180 g of Composition B explosive, which has a TNT equivalence of about 1.33×, giving roughly 240 grams of TNT equivalent. The lethal radius is about 5 meters, with a casualty-producing radius of 15 meters. The fragmentation — not the blast energy alone — is the primary wounding mechanism.

One gram of TNT releases exactly 1 thermochemical kilocalorie (1 kcal = 4,184 J) by definition. This means a dietary Calorie (nutritional kcal) contains the same energy as detonating one gram of TNT. A 2,000-Calorie daily diet is energetically equivalent to 2 kg of TNT — though your body releases that energy over 24 hours, not in microseconds.

RC servo motors are rated by torque in inch-ounces (or oz·in) because the forces involved are tiny. A standard micro servo produces 40–60 in·oz, which is enough to deflect a model aircraft aileron. High-torque digital servos for 1/10-scale RC cars reach 200–400 in·oz. The inch-ounce scale gives hobbyists whole-number specs that are easy to compare.

Servo motors produce more torque at higher voltage because the motor windings draw more current and generate a stronger magnetic field. A servo rated at 60 in·oz at 4.8 V might deliver 75 in·oz at 6 V — a 25% boost. RC pilots choose voltage based on the tradeoff: 6 V gives snappier response and more holding torque for aerobatics, but draws more current and generates more heat, reducing servo lifespan. Competition flyers often run 7.4 V for maximum performance, accepting shorter gear life.

Inch-ounces give convenient whole numbers for very small torques where newton-meters would be awkward decimals (e.g., 50 in·oz ≈ 0.353 N·m). The RC hobby, miniature clockwork, and precision instrument industries in the US developed around imperial units, and the convention persists even as SI gains ground. Many datasheets now list both units side by side.

A mechanical wristwatch mainspring delivers roughly 2–5 in·oz of torque. Larger mantel clocks may have mainspring torques of 10–30 in·oz. Escapement adjustments are even finer, sometimes below 1 in·oz. Horologists use inch-ounces (or gram-centimeters) because these scales match the delicate forces in timekeeping mechanisms.

A servo's inch-ounce rating tells you the maximum force it can exert at one inch from the output shaft. A 100 in·oz servo can hold 100 ounces (6.25 lb) at 1 inch, or 50 ounces at 2 inches. Robotics designers use this to size servos for joint loads — a small robotic arm lifting 1 lb at 4 inches needs at least 64 in·oz, plus a safety margin of 50% or more.