Grams of TNT to Therm (US)

By convention, exactly 4,184 joules — the same as one thermochemical kilocalorie. Real TNT detonation yields vary by about ±2% depending on purity and confinement, but the defined value provides a fixed reference point. This makes the gram of TNT a convenient bridge between chemistry (calories) and explosive engineering.

TNT (trinitrotoluene) became the reference explosive because it is chemically stable, safe to handle, and was massively produced during both World Wars. Its consistent detonation properties made it a natural benchmark. Other explosives are rated by their "TNT equivalent" — for example, C-4 is about 1.34× TNT and ANFO is about 0.74× TNT.

A standard US consumer firecracker contains about 0.5–1 gram of TNT equivalent in flash powder. An M-80 (now illegal for consumer sale) contained roughly 3 g of TNT equivalent. Cherry bombs were about 1.5 g. Commercially sold fireworks are regulated by the CPSC to contain no more than 50 mg of flash powder per report charge.

A US M67 fragmentation grenade contains about 180 g of Composition B explosive, which has a TNT equivalence of about 1.33×, giving roughly 240 grams of TNT equivalent. The lethal radius is about 5 meters, with a casualty-producing radius of 15 meters. The fragmentation — not the blast energy alone — is the primary wounding mechanism.

One gram of TNT releases exactly 1 thermochemical kilocalorie (1 kcal = 4,184 J) by definition. This means a dietary Calorie (nutritional kcal) contains the same energy as detonating one gram of TNT. A 2,000-Calorie daily diet is energetically equivalent to 2 kg of TNT — though your body releases that energy over 24 hours, not in microseconds.

Residential US natural gas prices typically range from $0.80 to $2.50 per therm depending on region, season, and utility. The wholesale Henry Hub benchmark translates to about $0.25 per therm at $2.50/MMBtu. Delivery charges, taxes, and utility markups roughly triple or quadruple the commodity cost by the time it reaches a home meter.

The average US home using gas for heating consumes about 500–900 therms per year, depending on climate, insulation, and home size. Homes in mild climates like Southern California may use under 300 therms; homes in Minnesota or Wisconsin can exceed 1,200 therms. Gas water heaters alone account for roughly 150–250 therms per year.

One US therm equals exactly 100,000 BTU, while one MMBtu (million BTU) equals 1,000,000 BTU — so 1 MMBtu equals 10 therms. Wholesale gas markets and pipeline contracts use MMBtu; residential utility bills use therms. The two are straightforward to convert, but confusing them by a factor of ten is a common mistake in energy cost comparisons.

Retail billing in therms gives homeowners manageable numbers — a winter month might be 80–120 therms at $1–2 each. Wholesale pipeline contracts deal in millions of BTU (MMBtu) because the volumes are enormous and the industry standardized on BTU-based pricing in the early 20th century. One MMBtu equals 10 therms, so converting is simple. The Henry Hub benchmark price of $2.50/MMBtu translates to about $0.25/therm before delivery charges, taxes, and utility markup roughly quadruple it at the meter.

A typical US residential furnace rated at 80,000–100,000 BTU/h uses about 0.8–1.0 therms per hour at full output. High-efficiency condensing furnaces (95%+ AFUE) extract more heat per therm, so they cycle less often. On a cold winter day, a furnace might run 8–12 hours total, consuming 6–10 therms. That translates to roughly $5–$25 per day depending on local gas prices.