Inch-Ounce to Therm (EC)

RC servo motors are rated by torque in inch-ounces (or oz·in) because the forces involved are tiny. A standard micro servo produces 40–60 in·oz, which is enough to deflect a model aircraft aileron. High-torque digital servos for 1/10-scale RC cars reach 200–400 in·oz. The inch-ounce scale gives hobbyists whole-number specs that are easy to compare.

Servo motors produce more torque at higher voltage because the motor windings draw more current and generate a stronger magnetic field. A servo rated at 60 in·oz at 4.8 V might deliver 75 in·oz at 6 V — a 25% boost. RC pilots choose voltage based on the tradeoff: 6 V gives snappier response and more holding torque for aerobatics, but draws more current and generates more heat, reducing servo lifespan. Competition flyers often run 7.4 V for maximum performance, accepting shorter gear life.

Inch-ounces give convenient whole numbers for very small torques where newton-meters would be awkward decimals (e.g., 50 in·oz ≈ 0.353 N·m). The RC hobby, miniature clockwork, and precision instrument industries in the US developed around imperial units, and the convention persists even as SI gains ground. Many datasheets now list both units side by side.

A mechanical wristwatch mainspring delivers roughly 2–5 in·oz of torque. Larger mantel clocks may have mainspring torques of 10–30 in·oz. Escapement adjustments are even finer, sometimes below 1 in·oz. Horologists use inch-ounces (or gram-centimeters) because these scales match the delicate forces in timekeeping mechanisms.

A servo's inch-ounce rating tells you the maximum force it can exert at one inch from the output shaft. A 100 in·oz servo can hold 100 ounces (6.25 lb) at 1 inch, or 50 ounces at 2 inches. Robotics designers use this to size servos for joint loads — a small robotic arm lifting 1 lb at 4 inches needs at least 64 in·oz, plus a safety margin of 50% or more.

The EC therm is defined as exactly 105,505,600 joules; the US therm is 105,480,400 joules — a difference of 25,200 J (about 0.024%). The discrepancy arose from slightly different historical BTU definitions. For residential gas billing the difference is negligible, but in large-scale energy trading involving millions of therms, the distinction can affect settlement amounts.

The UK Gas Act 1995 mandated a switch from therms to kWh as part of broader metrication. One therm (EC) equals 29.3071 kWh. The change aligned gas billing with electricity billing, making it easier for consumers to compare energy costs. Older UK customers and industry veterans still refer to therms colloquially, and wholesale gas markets continued using therms for years after the retail switch.

A typical UK home uses 500–800 therms (EC) per year for heating and hot water, equivalent to roughly 14,700–23,400 kWh. Well-insulated newer homes may use under 400 therms, while large Victorian houses with poor insulation can exceed 1,200 therms. Ofgem's energy price cap is set in pence per kWh, but converting back to therms gives about £2.50–£3.50 per therm at recent rates.

One cubic meter of UK pipeline-quality natural gas contains roughly 38.5–39.5 MJ, which is about 0.365–0.374 therms (EC). Gas meters measure volume in cubic meters, and the utility applies a calorific value correction to convert to kWh (or therms). The correction factor varies by region and season because gas composition changes depending on the source field.

The therm (EC) was once the standard trading unit on the UK's NBP (National Balancing Point) gas market. In 2020, the ICE exchange switched NBP contracts from pence per therm to pence per kWh. Continental European hubs like TTF have always traded in euros per MWh. The therm is fading from professional use but remains in legacy contracts and older billing systems.