Inch-Pound to Megatons of TNT

Inch-pounds provide finer resolution for small fasteners where foot-pound values would be fractions (e.g., 3 in·lb vs 0.25 ft·lb). Electronics assembly, firearms scope mounting, and bicycle component installation all specify inch-pounds because over-torquing a small screw by even one foot-pound can strip threads or crack housings.

On an M3 screw into aluminum (spec: 5 in·lb), exceeding by 2 in·lb — a 40% overload — can strip the threads or crack a thin boss. Small fasteners have almost no safety margin because the thread engagement area is tiny and the materials (plastic, aluminum, brass) are soft. This is why electronics repair shops use beam-type or preset click torque drivers accurate to ±0.5 in·lb, and why aerospace assembly procedures treat inch-pound specs as hard limits, not suggestions.

Laptop hinge screws typically require 2–5 in·lb, hard drive mounting screws 2–4 in·lb, and motherboard standoff screws 5–8 in·lb. Going beyond the spec risks cracking plastic bosses or stripping soft aluminum threads. A precision bit driver with a torque limiter is essential for electronics repair work.

Dimensionally they are identical — force times distance — but context differs. As torque, 1 in·lb means one pound-force applied at one inch from a pivot. As energy, it means one pound-force pushing through one inch of linear displacement (0.11299 J). In practice, inch-pounds almost always refer to torque in mechanical specifications.

Scope rings and bases use small screws that are easily damaged, and consistent clamping force is critical for zero retention under recoil. Typical specs are 15–25 in·lb for ring screws and 30–65 in·lb for base screws. Under-torquing lets the scope shift; over-torquing cracks the scope tube or strips the screw. A dedicated inch-pound torque wrench is considered essential kit for precision rifle setup.

One megaton equals 4.184 × 10¹⁵ joules — the energy of burning about 120 million liters of petrol or the total electricity output of a large power plant running for 50 days. A 1-megaton airburst would flatten reinforced concrete buildings within 2 km, cause third-degree burns at 10 km, and break windows at 40+ km. It is roughly 67 times the Hiroshima bomb.

The Soviet AN602 "Tsar Bomba," detonated on 30 October 1961, yielded approximately 50 megatons — the largest human-made explosion in history. It was a three-stage thermonuclear device originally designed for 100 Mt but scaled down by replacing the uranium tamper with lead to reduce fallout. The fireball was 8 km wide, and the mushroom cloud rose 67 km. It was a propaganda weapon with no practical military use.

Modern strategic warheads are smaller than Cold War designs because accuracy improved. The US W88 yields about 0.475 Mt; the W76-1 about 0.1 Mt. Russian RS-28 Sarmat MIRVs carry warheads estimated at 0.5–0.8 Mt each. Military planners found that several smaller warheads (MIRVs) destroy more area than one large one due to the cube-root scaling of blast radius with yield.

The Chicxulub impact that ended the dinosaurs released roughly 100 million megatons (10²³ J). The Tunguska event (1908) was 3–15 megatons. NASA's planetary defense threshold is objects capable of 1+ megatons of damage. A 50-meter iron asteroid striking Earth at 20 km/s would release about 10 megatons — enough to obliterate a major city.

Accuracy replaced raw yield. A 0.5 Mt warhead landing within 100 meters of a target destroys it just as effectively as a 10 Mt warhead landing 1 km away. MIRVed missiles carrying 6–10 smaller warheads also cover more total area than one massive bomb. The US retired its last megaton-class warhead (the B83) in 2022, relying entirely on sub-megaton weapons.