Kilograms of TNT to Therm (US)

One kilogram of TNT releases 4.184 MJ — enough to shatter windows within several meters and cause serious injury at close range. In open air, 1 kg of TNT produces a blast overpressure lethal to humans within about 2–3 meters. The effect depends heavily on confinement: the same charge inside a vehicle or building is far more destructive than in open ground.

One kilogram of TNT (4.184 MJ) is roughly the kinetic energy of a 1,500 kg car traveling at 75 km/h, or the energy stored in about 120 mL (half a cup) of petrol. It is also the chemical energy in roughly one large meal (1,000 kcal). The difference is that TNT releases its energy in microseconds rather than hours.

Mining engineers express blast charge sizes in kg of TNT equivalent to standardize across different commercial explosives. A typical quarry blast hole uses 5–50 kg of ANFO (ammonium nitrate/fuel oil), equivalent to roughly 4–37 kg TNT. Building demolition charges range from 10 to several hundred kg TNT equivalent, carefully placed at structural weak points.

A standard 155 mm artillery shell contains about 7–11 kg of TNT equivalent. A 500 lb (Mk 82) air-dropped bomb holds roughly 87 kg of TNT equivalent. An RPG-7 warhead is about 1–2 kg TNT equivalent. Anti-tank mines range from 5–10 kg TNT equivalent. These figures represent explosive fill, not total weapon weight.

A standard stick of commercial dynamite (about 200 g, 20 cm long) has a TNT equivalence of roughly 0.25–0.30 kg, since dynamite is about 1.25–1.5× as powerful as TNT by weight. Eight sticks of dynamite are roughly equivalent to one kilogram of TNT. Modern mining rarely uses traditional dynamite, preferring cheaper ANFO or emulsion explosives.

Residential US natural gas prices typically range from $0.80 to $2.50 per therm depending on region, season, and utility. The wholesale Henry Hub benchmark translates to about $0.25 per therm at $2.50/MMBtu. Delivery charges, taxes, and utility markups roughly triple or quadruple the commodity cost by the time it reaches a home meter.

The average US home using gas for heating consumes about 500–900 therms per year, depending on climate, insulation, and home size. Homes in mild climates like Southern California may use under 300 therms; homes in Minnesota or Wisconsin can exceed 1,200 therms. Gas water heaters alone account for roughly 150–250 therms per year.

One US therm equals exactly 100,000 BTU, while one MMBtu (million BTU) equals 1,000,000 BTU — so 1 MMBtu equals 10 therms. Wholesale gas markets and pipeline contracts use MMBtu; residential utility bills use therms. The two are straightforward to convert, but confusing them by a factor of ten is a common mistake in energy cost comparisons.

Retail billing in therms gives homeowners manageable numbers — a winter month might be 80–120 therms at $1–2 each. Wholesale pipeline contracts deal in millions of BTU (MMBtu) because the volumes are enormous and the industry standardized on BTU-based pricing in the early 20th century. One MMBtu equals 10 therms, so converting is simple. The Henry Hub benchmark price of $2.50/MMBtu translates to about $0.25/therm before delivery charges, taxes, and utility markup roughly quadruple it at the meter.

A typical US residential furnace rated at 80,000–100,000 BTU/h uses about 0.8–1.0 therms per hour at full output. High-efficiency condensing furnaces (95%+ AFUE) extract more heat per therm, so they cycle less often. On a cold winter day, a furnace might run 8–12 hours total, consuming 6–10 therms. That translates to roughly $5–$25 per day depending on local gas prices.