Kilowatt Hour to Therm (US)

A kilowatt (kW) is a rate of energy use — power. A kilowatt-hour (kWh) is a total amount of energy consumed over time. A 2 kW heater running for 3 hours uses 6 kWh. Your electricity meter tracks cumulative kWh, not kW. Confusing the two is one of the most common mistakes in energy discussions, similar to confusing speed with distance.

The US Energy Information Administration puts the national average at about 886 kWh per month (roughly 29 kWh per day). Homes in hot states like Louisiana average over 1,100 kWh due to air conditioning; mild-climate states like Hawaii average under 500 kWh. A household's bill equals kWh consumed multiplied by the local rate, typically $0.10–$0.30 per kWh.

Most EVs have battery packs of 50–100 kWh. A Tesla Model 3 Long Range holds about 75 kWh; a Rivian R1T about 135 kWh. Charging from empty to full at home costs roughly $7–$20 depending on battery size and local electricity rates. At $0.15/kWh, a 75 kWh charge costs $11.25 — far cheaper than filling a petrol tank for equivalent range.

In the US, residential electricity averages about $0.16/kWh nationally but ranges from $0.10 in Louisiana to $0.45 in Hawaii. In Europe, prices are higher: Germany averages €0.30–0.40/kWh. One kWh runs a modern fridge for about 24 hours, powers a 55-inch LED TV for 10 hours, or charges a smartphone roughly 80 times.

A standard 400 W residential solar panel produces about 1.2–2.0 kWh per day depending on location, orientation, and weather. In sunny Arizona, expect the high end; in cloudy Seattle, the low end. A typical US home rooftop system of 20 panels (8 kW) generates roughly 25–40 kWh per day — enough to cover most or all of the household's electricity needs.

Residential US natural gas prices typically range from $0.80 to $2.50 per therm depending on region, season, and utility. The wholesale Henry Hub benchmark translates to about $0.25 per therm at $2.50/MMBtu. Delivery charges, taxes, and utility markups roughly triple or quadruple the commodity cost by the time it reaches a home meter.

The average US home using gas for heating consumes about 500–900 therms per year, depending on climate, insulation, and home size. Homes in mild climates like Southern California may use under 300 therms; homes in Minnesota or Wisconsin can exceed 1,200 therms. Gas water heaters alone account for roughly 150–250 therms per year.

One US therm equals exactly 100,000 BTU, while one MMBtu (million BTU) equals 1,000,000 BTU — so 1 MMBtu equals 10 therms. Wholesale gas markets and pipeline contracts use MMBtu; residential utility bills use therms. The two are straightforward to convert, but confusing them by a factor of ten is a common mistake in energy cost comparisons.

Retail billing in therms gives homeowners manageable numbers — a winter month might be 80–120 therms at $1–2 each. Wholesale pipeline contracts deal in millions of BTU (MMBtu) because the volumes are enormous and the industry standardized on BTU-based pricing in the early 20th century. One MMBtu equals 10 therms, so converting is simple. The Henry Hub benchmark price of $2.50/MMBtu translates to about $0.25/therm before delivery charges, taxes, and utility markup roughly quadruple it at the meter.

A typical US residential furnace rated at 80,000–100,000 BTU/h uses about 0.8–1.0 therms per hour at full output. High-efficiency condensing furnaces (95%+ AFUE) extract more heat per therm, so they cycle less often. On a cold winter day, a furnace might run 8–12 hours total, consuming 6–10 therms. That translates to roughly $5–$25 per day depending on local gas prices.