Therm (US) to Gigajoule

Residential US natural gas prices typically range from $0.80 to $2.50 per therm depending on region, season, and utility. The wholesale Henry Hub benchmark translates to about $0.25 per therm at $2.50/MMBtu. Delivery charges, taxes, and utility markups roughly triple or quadruple the commodity cost by the time it reaches a home meter.

The average US home using gas for heating consumes about 500–900 therms per year, depending on climate, insulation, and home size. Homes in mild climates like Southern California may use under 300 therms; homes in Minnesota or Wisconsin can exceed 1,200 therms. Gas water heaters alone account for roughly 150–250 therms per year.

One US therm equals exactly 100,000 BTU, while one MMBtu (million BTU) equals 1,000,000 BTU — so 1 MMBtu equals 10 therms. Wholesale gas markets and pipeline contracts use MMBtu; residential utility bills use therms. The two are straightforward to convert, but confusing them by a factor of ten is a common mistake in energy cost comparisons.

Retail billing in therms gives homeowners manageable numbers — a winter month might be 80–120 therms at $1–2 each. Wholesale pipeline contracts deal in millions of BTU (MMBtu) because the volumes are enormous and the industry standardized on BTU-based pricing in the early 20th century. One MMBtu equals 10 therms, so converting is simple. The Henry Hub benchmark price of $2.50/MMBtu translates to about $0.25/therm before delivery charges, taxes, and utility markup roughly quadruple it at the meter.

A typical US residential furnace rated at 80,000–100,000 BTU/h uses about 0.8–1.0 therms per hour at full output. High-efficiency condensing furnaces (95%+ AFUE) extract more heat per therm, so they cycle less often. On a cold winter day, a furnace might run 8–12 hours total, consuming 6–10 therms. That translates to roughly $5–$25 per day depending on local gas prices.

In cold-climate countries, 30–60 GJ per year is common for heating and hot water. A well-insulated modern home in Germany might use 20 GJ; a drafty older home in Canada might use 100+ GJ. Australians use about 40 GJ/year on average. Each gigajoule costs roughly $8–$15 depending on local gas prices.

One tonne of coal holds roughly 24–30 GJ depending on grade. One tonne of crude oil contains about 42–44 GJ. One tonne of LNG holds roughly 54 GJ. One tonne of dry firewood stores about 16 GJ. These figures explain why oil and gas are preferred for transport — they pack more gigajoules per kilogram than solid fuels.

One gigajoule equals 277.78 kWh. At an average electricity price of $0.15/kWh, one gigajoule of electrical energy costs about $42. The same gigajoule from natural gas costs $8–15. This price gap is the main reason gas boilers remain popular for heating in countries with cheap pipeline gas.

A single-aisle jet like the Boeing 737-800 burns about 10–12 GJ per flight hour. A six-hour transatlantic flight on a wide-body aircraft can consume 300–400 GJ of jet fuel. The entire global aviation industry uses roughly 12 billion gigajoules of fuel per year — about 3% of total world energy consumption.

At 2,000 kcal/day (8.4 MJ/day), a person consumes about 3.07 GJ of food energy per year. Over 80 years, that is roughly 245 GJ — equivalent to about 6,000 liters of petrol. Your entire lifetime food energy would fit in a medium-sized fuel tanker, which is a humbling thought.