Terahertz to Megahertz

For decades, electronics could generate frequencies up to ~100 GHz and optics could work down to ~10 THz, but the range between 0.1 and 10 THz was hard to reach from either direction. Electronic oscillators became too slow and lasers too low-energy. Only in the last 20 years have quantum cascade lasers and photoconductive antennas started closing this gap, opening new applications in imaging and spectroscopy.

Active scanners illuminate passengers with millimeter or terahertz waves (typically 0.1–1 THz), which pass through clothing but reflect off skin and dense objects. The reflected signal creates a body outline showing concealed items without ionising radiation. Because terahertz energy is about a million times weaker than an X-ray photon, it cannot break chemical bonds or damage DNA.

No. Terahertz photons carry far less energy than visible light photons and are non-ionising — they cannot knock electrons off atoms or damage DNA. At extremely high power they could heat tissue (like a microwave), but every practical terahertz imaging system operates at power levels thousands of times below any thermal threshold. You are bathed in more terahertz radiation from your own body heat than from an airport scanner.

Red light starts around 430 THz (700 nm wavelength) and violet reaches about 750 THz (400 nm). So the entire rainbow occupies roughly 430–750 THz. Infrared sits below red at 0.3–430 THz, and ultraviolet begins above violet at 750+ THz. When someone says "terahertz imaging," they mean the far-infrared end below about 10 THz — well below anything your eyes can detect.

For some applications, yes. Terahertz imaging can distinguish cancerous from healthy tissue based on water-content differences, and it does so without ionising radiation. It is already used experimentally during skin and breast cancer surgery to check tumor margins in real time. The limitation is penetration depth: terahertz waves are absorbed by water within millimeters, so they cannot image deep organs the way X-rays or MRI can.

IBM needed a clock that could derive both the CPU timing and the NTSC color-burst frequency (3.579545 MHz) for the built-in composite video output. Multiplying the color-burst frequency by 4/3 gave 4.77 MHz — a convenient compromise that let one crystal oscillator serve two purposes. The weird number was pure engineering pragmatism, not performance targeting.

The 433.05–434.79 MHz range is an ISM (Industrial, Scientific, Medical) band that is license-free in most of Europe. Cheap remote-control key fobs, weather stations, garage door openers, and IoT sensors all crowd into it because you can legally transmit at low power without a radio license. In the US, the equivalent unlicensed band is 315 MHz, which is why European and American car key fobs are not interchangeable.

AM encodes audio by varying the wave's amplitude, which is vulnerable to electrical interference (lightning, motors). FM varies the frequency instead, making it inherently noise-resistant. FM also has a wider channel bandwidth (200 kHz vs. AM's 10 kHz), allowing it to carry the full 20–15,000 Hz audio spectrum in stereo. The MHz carrier frequency itself isn't what improves quality — it's the modulation method and bandwidth.

Intel and AMD marketed processors by clock speed — 500 MHz, 1 GHz, 2 GHz — implying faster was always better. By 2004, Intel's Pentium 4 hit 3.8 GHz but ran so hot and consumed so much power that performance-per-watt cratered. The industry pivoted to multi-core designs: instead of one core at 4 GHz, you got two or four cores at 2 GHz each, doing more total work with less heat. Raw megahertz stopped being a useful buying metric.

Bluetooth operates in the 2.4 GHz ISM band (2,400–2,483.5 MHz), which is reserved globally for unlicensed use. This avoids the need for regulatory approval in each country. The trade-off is sharing the band with Wi-Fi, microwaves, and baby monitors. Bluetooth mitigates interference by hopping between 79 channels 1,600 times per second — if one frequency is jammed, it has already moved on.