BTU (IT)/second to Terawatt

In US combustion engineering and power plant heat rate analysis, fuel energy content is natively specified in BTU (natural gas is sold per therm = 100,000 BTU). Expressing burner output in BTU/s keeps the calculation in one unit system, avoiding constant conversions. When your fuel flow is in BTU/min and your efficiency calculations use BTU, switching to watts mid-calculation just creates errors.

One BTU/s ≈ 1,055 watts — roughly a single-bar electric fire or a small hair dryer. It's a surprisingly human-scale unit. A typical US home gas furnace running at full blast produces about 28 BTU/s (100,000 BTU/h ÷ 3,600). A gas stovetop burner on high delivers about 3–5 BTU/s. So BTU/s lands right in the range where you can feel the heat on your face.

Power plant thermal engineering (heat rate analysis), industrial furnace and kiln design, jet engine combustion analysis, and rocket propulsion engineering. NASA specifications for rocket engines often include BTU/s figures. The Space Shuttle Main Engine produced about 12 million BTU/s of thermal power. Steelmaking blast furnaces operate at 50,000–200,000 BTU/s of heat input.

One BTU/s = 1.415 mechanical horsepower, or roughly 1.4 hp. This is useful in automotive and engine testing where dynamometers may report in BTU/s for thermal measurements but engineers think in horsepower. A 400 hp engine rejects about 280 BTU/s through its cooling system at full power (assuming 60% of fuel energy becomes waste heat). The conversion factor is easy to remember: multiply BTU/s by 1.4 to get hp.

The BTU originated as a water-heating energy unit, with several temperature-dependent variants. This converter uses the fixed International Table variant: 1 BTU(IT) = exactly 1,055.05585262 J. BTU-based energy and power units remain common in U.S. thermal engineering, equipment ratings and fuel-energy quantities. BTU alone measures energy; BTU per second, minute or hour measures power.

The Sun delivers about 173,000 TW to Earth's surface. Human civilisation uses roughly 18 TW total. So we'd only need to capture 0.01% of incoming solar energy to power everything — an area of solar panels roughly 400 km × 400 km, about the size of Montana. The challenge isn't total energy availability; it's cost, storage, transmission, and the fact that sunlight is spread thin and intermittent.

Imagine 18 trillion light bulbs burning continuously, or 9 billion people each running a 2 kW heater non-stop. That 18 TW figure includes everything — electricity, transport fuel, industrial heat, cooking, heating. About 40% comes from oil, 27% from coal, 24% from gas, and the rest from nuclear and renewables. The US alone accounts for about 3 TW despite having only 4% of world population.

Replacing all 18 TW of human energy with clean sources would require roughly 60–75 TW of installed solar capacity (accounting for ~25% average capacity factor). That's about 40 times current installed solar. At 2023 installation rates of ~0.4 TW/year, it would take 150 years — but installation rates are doubling every 2–3 years. If that exponential trend holds, we could theoretically reach 60 TW of solar within 15–20 years.

Earth radiates about 47 TW of geothermal heat from its interior, driven by radioactive decay and residual primordial heat. That's 2.5× human energy consumption, but it's spread across the entire surface at extremely low density (~0.09 W/m²). Iceland, sitting atop a mantle plume, exploits geothermal for 90% of its heating. Globally, geothermal electricity capacity is only about 16 GW — a tiny fraction of what's theoretically available.

No — the terawatt scale is a very recent phenomenon. In 1800, global human power consumption was about 0.5 TW (mostly biomass burning). By 1900 it reached 1 TW with coal industrialisation. We crossed 10 TW around 1985. The jump from 1 to 18 TW in just 120 years tracks almost perfectly with global population growth times rising per-capita energy use. Pre-industrial humans used about 0.1 kW each; Americans now average 10 kW per person.