Horsepower (International) to Horsepower (British)

By the mid-20th century, at least five different horsepower definitions existed: British mechanical, metric (PS), electric, boiler, and water. International trade required a single reference. The 1956 agreement standardized the mechanical/British value (745.699872 W) as the international benchmark. This didn't eliminate the others — metric PS persists in Europe, electric hp in US motors — but it gave engineers a common reference when precision matters or when "hp" appears without qualification.

SAE J1349 specifies measuring net horsepower with all production accessories (alternator, water pump, AC compressor) attached, at standard atmospheric conditions. Before 1972, US manufacturers used gross hp (engine on a test stand with minimal accessories), which inflated numbers by 15–25%. The switch to SAE net ratings famously caused "overnight" power drops: a Corvette went from "350 hp" (gross) to "255 hp" (net) in 1972 — same engine, honest measurement.

Japan officially uses metric PS (called 馬力, "horse power," abbreviated PS after the German). Japanese car specs list PS, and JIS standards define power in PS. However, for international export, Japanese manufacturers convert to international hp or kW depending on the destination market. A Nissan GT-R produces 570 PS for the Japanese market and 565 hp for the US market — the same engine, different unit systems, and the ~1% gap occasionally causes forum arguments.

The Wärtsilä-Sulzer RTA96-C, a marine diesel engine used in the largest container ships, produces about 109,000 hp (international) — 80,080 kW from 14 cylinders each the size of a small apartment. It's 13.5 meters tall and weighs 2,300 tonnes. At 102 RPM, it turns propellers the size of houses. For comparison, a Saturn V rocket's five F-1 engines produced about 217 million hp combined, but only for 2.5 minutes.

Probably, but slowly. The EU already legally requires kW; China uses kW; scientific and engineering communities prefer kW. But cultural inertia is powerful — Americans have been buying cars by horsepower for over a century, and "how many horses under the hood" is deeply embedded in car culture. The transition to EVs may accelerate the shift, since electric motors are naturally rated in kW. Give it 20–30 years, and hp may join the furlong and the gill in the museum of obsolete units.

A horse can sustain about 0.7 hp over a working day, and briefly peak at 10–15 hp during a gallop or heavy pull. Watt's definition was deliberately generous — he wanted his steam engines to look good compared to the horses they replaced. A fit human can sustain about 0.1 hp and peak at ~1–2 hp briefly. So a horse is roughly 7× a human in sustained output, which aligns well with historical accounts of animal labor replacing human workers.

Because American engineering inherited the British unit directly — the US was a British colony when Watt defined horsepower in the 1780s. Both equal 550 ft·lbf/s = 33,000 ft·lbf/min = 745.7 W. The "international" horsepower adopted in 1956 formalised this same value. The only reason it's sometimes called "British" is to distinguish it from the metric horsepower (PS) used in continental Europe, which is 1.4% smaller.

Watt's own improved steam engines: 10–20 hp. Brunel's SS Great Eastern ship engines: 8,000 hp. The Rolls-Royce Merlin (WW2 Spitfire): 1,030–1,760 hp depending on variant. Concorde's Olympus 593 engines: 38,000 hp each (with reheat). The Rolls-Royce Trent XWB (A350 engine): about 97,000 hp. In 240 years, British engines went from 20 hp to 97,000 hp — a 5,000-fold increase.

Almost. "bhp" stands for "brake horsepower" — power measured at the engine output shaft using a dynamometer (historically a brake). "hp" can technically mean the gross figure including power consumed by accessories. Since 2005, European regulations require "net" power (engine with all standard accessories), so bhp and hp are effectively identical for modern cars. The "b" in bhp is mostly a British tradition to emphasize that the number is a real dynamometer measurement, not a theoretical calculation.

From 1910 to 1947, Britain taxed cars by "RAC horsepower" — a formula based on cylinder bore and number of cylinders, not actual power. This incentivised narrow-bore, long-stroke engines with terrible performance. A car rated at "10 RAC hp" might actually produce 30–40 real hp. The tax warped British car design for decades, producing underpowered engines that only made sense as tax dodges. The system was scrapped in 1947, but its legacy shaped British car culture for years after.