Petawatt to Horsepower (Electric)

It's a time trick. A petawatt laser concentrates a modest amount of energy (maybe 100–500 joules) into a pulse lasting 10–100 femtoseconds. Dividing a few hundred joules by 10⁻¹⁴ seconds gives you 10¹⁵–10¹⁶ watts — surpassing the Sun's 3.8 × 10²⁶ W is still far off, but these lasers do exceed total human power consumption by 100,000×. The catch: the total energy delivered is only enough to heat a cup of coffee.

Primarily for nuclear fusion research (compressing fuel pellets), particle acceleration (laser wakefield acceleration can produce electron beams rivalling billion-dollar synchrotrons), medical isotope production, and probing extreme states of matter found in stellar cores. The ELI (Extreme Light Infrastructure) project in Europe uses petawatt lasers to recreate conditions found in supernovae, helping astrophysicists study cosmic explosions in a lab.

Solar flares can briefly release 10–100 PW of electromagnetic radiation. The Chicxulub asteroid impact (the one that killed the dinosaurs) delivered roughly 4 × 10²³ watts during the few seconds of impact — about 100 million petawatts. Gamma-ray bursts top everything at 10²⁵–10²⁶ PW, briefly outshining the entire observable universe. Even supernovae "only" sustain about 10³⁶ PW for a few seconds at peak.

Building one costs $50–500 million. Operating costs are surprisingly modest per shot — each pulse uses only a few hundred joules (less than lifting an apple one meter), but the capacitor banks and cooling systems draw megawatts of continuous power. The NIF facility costs about $350 million per year to operate. Individual shots are "cheap" in energy terms but the infrastructure to achieve them is staggering.

In theory yes, but in practice current petawatt lasers are terrible weapons. They fire one pulse every few minutes to hours, require warehouse-sized buildings of equipment, and deliver total energy equivalent to a firecracker. Military-grade laser weapons focus on sustained power (100–300 kW continuous beams), not ultrashort pulses. A petawatt laser is a precision scientific scalpel, not a blunt instrument — brilliant for physics, useless for destruction.

It's a deliberate rounding for simplicity. The mechanical horsepower is 745.69987... watts — an ugly number for electrical calculations. The electric motor industry rounded to 746 W for clean nameplate ratings and straightforward calculations. The 0.04% difference is far below any motor's manufacturing tolerance. Some standards even use 750 W as an approximation. In practice, the distinction between 745.7 and 746 matters only to standards lawyers and unit conversion pedants.

Divide the hp rating by the motor efficiency and power factor. A 5 hp motor at 90% efficiency draws: 5 × 746 / 0.90 = 4,144 W of electrical power to deliver 3,730 W of shaft power. For three-phase motors, also divide by (√3 × voltage × power factor) to get amperage. Real-world efficiency ranges from 75% for small motors to 96% for large premium-efficiency ones. The nameplate always shows shaft output, not electrical input — a common source of confusion.

Because American homeowners and pool contractors have decades of experience sizing pumps in hp: "a 20,000-gallon pool needs a 1.5 hp pump" is ingrained knowledge. The Department of Energy actually mandated variable-speed pool pumps in 2021 and encouraged watt-based efficiency ratings, but manufacturers still prominently display hp because it drives purchasing decisions. A customer choosing between a 1 hp and 1.5 hp pump understands the difference intuitively; 746 W vs 1,119 W means nothing to them.

NEMA (National Electrical Manufacturers Association) defines standard motor sizes using electric hp: 1/4, 1/3, 1/2, 3/4, 1, 1.5, 2, 3, 5, 7.5, 10, 15, 20, 25, 30, 40, 50, 60, 75, 100 hp and up. These are standardized frame sizes — a 5 hp motor from any manufacturer fits the same mounting bolts. The hp(E) rating is the shaft output; NEMA also specifies efficiency classes (IE1 through IE4) that determine how much electrical power the motor actually consumes.

Not usually. EV manufacturers rate motors in kilowatts because the electrical connection is obvious and kW is internationally understood. A Tesla Model 3 motor is listed as 211 kW, not "283 hp(E)." However, marketing materials often convert to hp for American consumers: "283 horsepower" sounds sportier. Interestingly, EV motors are far more efficient (90–97%) than combustion engines (25–40%), so a 200 hp EV motor consumes far less total energy than a 200 hp gasoline engine.