Inch Mercury to Pound per Square Inch
inHg
psi
Conversion History
| Conversion | Reuse | Delete |
|---|---|---|
1 inHg (Inch Mercury) → 0.4911528942993861472170833296136140346 psi (Pound per Square Inch) Just now |
Quick Reference Table (Inch Mercury to Pound per Square Inch)
| Inch Mercury (inHg) | Pound per Square Inch (psi) |
|---|---|
| 1 | 0.4911528942993861472170833296136140346 |
| 5 | 2.45576447149693073608541954882282480412 |
| 10 | 4.91152894299386147217083909764564960824 |
| 20 | 9.82305788598772294434167819529129921648 |
| 29.92 | 14.69529459743763352473515033649238423884 |
| 30 | 14.73458682898158441651251729293694882472 |
| 35 | 17.19035130047851515259793684175977362884 |
About Inch Mercury (inHg)
The inch of mercury (inHg) is the pressure exerted by a 1-inch column of mercury at 32 °F (0 °C) under standard gravity, equal to approximately 3,386.39 pascals. It is the standard unit for atmospheric pressure and altimeter settings in US aviation and meteorology. Weather forecasts in the US report barometric pressure in inHg; aircraft altimeters in the US are set to inHg, with standard sea-level pressure at 29.921 inHg. HVAC refrigeration technicians also use inHg for vacuum measurements below atmospheric pressure.
Standard sea-level atmospheric pressure is 29.921 inHg. A major hurricane may lower barometric pressure below 27 inHg.
About Pound per Square Inch (psi)
The pound per square inch (psi) is the dominant pressure unit in US customary practice, equal to approximately 6,894.76 pascals. It is universally used in the United States for tire pressures, compressed-air systems, hydraulic machinery, pipe pressure ratings, and industrial gauges. Standard atmospheric pressure is 14.696 psi. Pressure is expressed as gauge (psig, relative to atmosphere) or absolute (psia). Natural gas pipeline pressures, boiler ratings, and municipal water supply pressures in the US are all quoted in psi.
Car tire inflation is typically 30–35 psi. A standard garden hose delivers water at 40–60 psi.
Etymology: A straightforward compound of "pound" (from Latin pondus, weight) and "square inch", arising naturally from US customary engineering practice. There is no single defining event; the unit crystallised alongside the development of American steam engineering in the early 19th century.
Inch Mercury – Frequently Asked Questions
Why do US weather reports give barometric pressure in inches of mercury?
The US National Weather Service inherited the convention from early American meteorology, which used mercury barometers calibrated in inches. A typical sea-level reading of 29.92 inHg is easy to remember and fits weather maps without decimal clutter. Most other countries switched to millibars or hectopascals, but the US stuck with inHg for the same reason it kept Fahrenheit — familiarity and institutional inertia.
What is the altimeter setting that pilots hear in US aviation?
US air traffic controllers broadcast the local barometric pressure in inches of mercury — for example, "altimeter two niner niner two" means 29.92 inHg. Pilots dial this into their altimeter so the instrument reads correct altitude above sea level. If the setting is wrong by just 0.1 inHg, the altimeter reads roughly 100 feet off — enough to matter during instrument approaches in fog.
What inHg reading counts as "low pressure" versus "high pressure"?
At sea level, 29.92 inHg is standard. Readings above 30.20 inHg are high-pressure (clear skies, calm winds). Below 29.50 inHg is considered low pressure and often signals approaching storms. The lowest sea-level pressure ever recorded was Typhoon Tip in 1979 at 25.69 inHg (870 mbar). A household barometer swinging from 30.50 down to 29.30 is a reliable sign that weather is deteriorating.
How do HVAC technicians use inches of mercury for vacuum readings?
Refrigeration techs evacuate AC system lines to remove moisture before charging with refrigerant. They measure the vacuum in inHg below atmospheric pressure — a reading of 29 inHg (out of 29.92 max) means near-total vacuum. Industry best practice requires pulling to at least 29.92 inHg (or equivalently, below 500 microns on a micron gauge) to ensure all moisture has boiled off at room temperature.
How do you convert inches of mercury to millibars or psi?
1 inHg ≈ 33.86 mbar ≈ 0.491 psi. So standard atmosphere (29.92 inHg) is about 1013 mbar or 14.7 psi. For quick mental math: multiply inHg by 34 to get millibars, or divide by 2 to get a rough psi estimate. These conversions come up constantly when comparing US weather data with international sources or converting aviation altimeter settings for foreign aircraft.
Pound per Square Inch – Frequently Asked Questions
Why do race car teams obsess over half-psi differences in tire pressure?
Because at racing speeds, tiny pressure changes transform tire behavior. Half a psi less inflates the contact patch, generating more grip but also more heat — potentially pushing the rubber past its optimal temperature window within a few laps. Half a psi more stiffens the sidewall, improving response but shrinking the contact patch and reducing peak grip. Formula 1 teams adjust pressures in quarter-psi increments based on track temperature, fuel load, and stint length. In NASCAR, a 1 psi difference between left and right tires is a deliberate setup tool that changes how the car rotates through banked turns.
What psi should car and bicycle tires be inflated to?
Passenger car tires: 30–35 psi (check the door jamb sticker, not the tire sidewall — the sidewall shows the maximum, not the recommended). Truck tires: 80–100 psi. Road bike tires: 80–130 psi. Mountain bike tires: 25–35 psi. Under-inflation by just 5 psi increases fuel consumption by about 2% and accelerates edge wear. Over-inflation reduces grip and makes the ride harsh.
What is the difference between psi, psig, and psia?
PSI is the generic unit. PSIG ("gauge") means pressure above atmospheric — what your tire gauge reads. PSIA ("absolute") includes atmospheric pressure on top: PSIA = PSIG + 14.7. A tire at 32 psig is actually at 46.7 psia. The distinction matters in engineering calculations involving gas laws (PV=nRT uses absolute pressure) and in vacuum work where gauge readings go negative.
What psi range do common household and industrial systems use?
City water supply: 40–80 psi. Home espresso machine: ~130 psi (9 bar). Pressure washer: 1,000–4,000 psi. Scuba tank: 3,000 psi. Hydraulic car jack: 3,000–10,000 psi. Diesel fuel injector rail: up to 30,000 psi. Waterjet cutter: 60,000+ psi. The range from a garden hose to an industrial waterjet spans roughly three orders of magnitude.
How do you quickly convert between psi and bar in your head?
Divide psi by 14.5 to get bar, or multiply bar by 14.5 to get psi. For even quicker estimates: 15 psi ≈ 1 bar, 30 psi ≈ 2 bar, 45 psi ≈ 3 bar. This "15 psi per bar" shortcut is within 2% of exact and is used by mechanics, divers, and engineers worldwide when a calculator is not handy.