Kilogram-force per Square Centimeter to Millimeter Mercury

One technical atmosphere (symbol "at") is defined as exactly 1 kgf/cm² — the pressure exerted by a 1 kg mass on a 1 cm² area under standard gravity. It equals 98,066.5 Pa, roughly 3.6% less than a standard atmosphere (101,325 Pa). Russian and Japanese engineering standards used it heavily through the 20th century, and you will still find it on older boiler plates, hydraulic presses, and pressure vessel nameplates across Asia and Eastern Europe.

Japanese Industrial Standards (JIS) and Soviet-era GOST standards specified kgf/cm² for decades, and millions of gauges, compressors, and hydraulic machines built to those specs remain in service. Replacing a working gauge just to change the scale is wasteful, so factories keep using kgf/cm² alongside newer SI instruments. Modern JIS standards accept both, but legacy equipment is everywhere.

Multiply kgf/cm² by 14.22 to get psi, or by 0.981 to get bar. For quick mental math: 1 kgf/cm² ≈ 1 bar ≈ 14.2 psi ≈ 1 atmosphere. The errors in those approximations are all under 4%, which is close enough for field work. For precision, use the exact factor: 1 kgf/cm² = 98,066.5 Pa.

Small hydraulic jacks operate at 50–100 kgf/cm². Excavator hydraulics run at 250–350 kgf/cm². Industrial presses for stamping car body panels can reach 500–1,000 kgf/cm². The highest-pressure hydraulic systems — used in forging and isostatic pressing — operate above 3,000 kgf/cm², squeezing metal powder into near-net-shape parts.

Officially, yes — the SI discourages kilogram-force entirely, and international standards bodies prefer pascals, bar, or psi. Practically, the phase-out is glacially slow. New equipment in Japan and Russia increasingly uses MPa or bar, but service manuals, legacy calibrations, and replacement parts will reference kgf/cm² for decades to come. Knowing the conversion (×0.0981 for MPa) remains a useful skill for anyone working with imported machinery.

Clinical medicine is deeply conservative about units because misreadings kill people. Doctors, nurses, and patients worldwide have memorized "120/80 is normal" in mmHg. Converting to kPa (16.0/10.7) would require retraining millions of clinicians and rewriting every guideline. The WHO considered the switch and decided the risk of transcription errors during transition outweighed the elegance of SI compliance. So mmHg stays — likely for decades more.

The top number (systolic) is the peak pressure when the heart contracts and pushes blood into the arteries — typically 90–120 mmHg. The bottom number (diastolic) is the lowest pressure between beats when the heart relaxes — typically 60–80 mmHg. A reading of 140/90 mmHg or above is classified as hypertension. The gap between the two (pulse pressure) also matters: a wide gap above 60 mmHg may signal stiff arteries.

In 1643, Evangelista Torricelli filled a glass tube with mercury, inverted it into a dish of mercury, and watched the column drop to about 760 mm. The empty space above was the first laboratory vacuum. The height of the mercury column became the measurement of atmospheric pressure — 760 mmHg at sea level. Nearly 400 years later, we still use his column height as a pressure unit in medicine and vacuum science.

For all practical purposes, they are identical — 1 torr = 1/760 atm ≈ 133.322 Pa, and 1 mmHg ≈ 133.322 Pa. The difference is about 0.00015% and arises from the torr being defined from the atmosphere while mmHg is defined from mercury density. Medicine uses mmHg; vacuum physics uses torr. They are interchangeable in any real-world measurement.

Intraocular pressure (glaucoma screening): normal is 10–21 mmHg, above 21 is suspicious. Partial pressure of oxygen in arterial blood (PaO₂): normal is 80–100 mmHg. Central venous pressure: 2–6 mmHg. Intracranial pressure: normal below 15 mmHg, dangerous above 20 mmHg. Carbon dioxide in blood (PaCO₂): 35–45 mmHg. The unit pervades clinical monitoring far beyond the blood pressure cuff.