Millimeter Mercury to Inch Mercury

Clinical medicine is deeply conservative about units because misreadings kill people. Doctors, nurses, and patients worldwide have memorized "120/80 is normal" in mmHg. Converting to kPa (16.0/10.7) would require retraining millions of clinicians and rewriting every guideline. The WHO considered the switch and decided the risk of transcription errors during transition outweighed the elegance of SI compliance. So mmHg stays — likely for decades more.

The top number (systolic) is the peak pressure when the heart contracts and pushes blood into the arteries — typically 90–120 mmHg. The bottom number (diastolic) is the lowest pressure between beats when the heart relaxes — typically 60–80 mmHg. A reading of 140/90 mmHg or above is classified as hypertension. The gap between the two (pulse pressure) also matters: a wide gap above 60 mmHg may signal stiff arteries.

In 1643, Evangelista Torricelli filled a glass tube with mercury, inverted it into a dish of mercury, and watched the column drop to about 760 mm. The empty space above was the first laboratory vacuum. The height of the mercury column became the measurement of atmospheric pressure — 760 mmHg at sea level. Nearly 400 years later, we still use his column height as a pressure unit in medicine and vacuum science.

For all practical purposes, they are identical — 1 torr = 1/760 atm ≈ 133.322 Pa, and 1 mmHg ≈ 133.322 Pa. The difference is about 0.00015% and arises from the torr being defined from the atmosphere while mmHg is defined from mercury density. Medicine uses mmHg; vacuum physics uses torr. They are interchangeable in any real-world measurement.

Intraocular pressure (glaucoma screening): normal is 10–21 mmHg, above 21 is suspicious. Partial pressure of oxygen in arterial blood (PaO₂): normal is 80–100 mmHg. Central venous pressure: 2–6 mmHg. Intracranial pressure: normal below 15 mmHg, dangerous above 20 mmHg. Carbon dioxide in blood (PaCO₂): 35–45 mmHg. The unit pervades clinical monitoring far beyond the blood pressure cuff.

The US National Weather Service inherited the convention from early American meteorology, which used mercury barometers calibrated in inches. A typical sea-level reading of 29.92 inHg is easy to remember and fits weather maps without decimal clutter. Most other countries switched to millibars or hectopascals, but the US stuck with inHg for the same reason it kept Fahrenheit — familiarity and institutional inertia.

US air traffic controllers broadcast the local barometric pressure in inches of mercury — for example, "altimeter two niner niner two" means 29.92 inHg. Pilots dial this into their altimeter so the instrument reads correct altitude above sea level. If the setting is wrong by just 0.1 inHg, the altimeter reads roughly 100 feet off — enough to matter during instrument approaches in fog.

At sea level, 29.92 inHg is standard. Readings above 30.20 inHg are high-pressure (clear skies, calm winds). Below 29.50 inHg is considered low pressure and often signals approaching storms. The lowest sea-level pressure ever recorded was Typhoon Tip in 1979 at 25.69 inHg (870 mbar). A household barometer swinging from 30.50 down to 29.30 is a reliable sign that weather is deteriorating.

Refrigeration techs evacuate AC system lines to remove moisture before charging with refrigerant. They measure the vacuum in inHg below atmospheric pressure — a reading of 29 inHg (out of 29.92 max) means near-total vacuum. Industry best practice requires pulling to at least 29.92 inHg (or equivalently, below 500 microns on a micron gauge) to ensure all moisture has boiled off at room temperature.

1 inHg ≈ 33.86 mbar ≈ 0.491 psi. So standard atmosphere (29.92 inHg) is about 1013 mbar or 14.7 psi. For quick mental math: multiply inHg by 34 to get millibars, or divide by 2 to get a rough psi estimate. These conversions come up constantly when comparing US weather data with international sources or converting aviation altimeter settings for foreign aircraft.