Pound per Square Inch to Kilogram-force per Square Centimeter
psi
kgf/cm²
Conversion History
| Conversion | Reuse | Delete |
|---|---|---|
| No conversion history to show. | ||
Quick Reference Table (Pound per Square Inch to Kilogram-force per Square Centimeter)
| Pound per Square Inch (psi) | Kilogram-force per Square Centimeter (kgf/cm²) |
|---|---|
| 0.1 | 0.0070306957963268022171522545948790162 |
| 1 | 0.0703069579632680221715228518636540554 |
| 14.696 | 1.033231054228186853832699634386974136 |
| 30 | 2.1092087388980406651456852499947577686 |
| 60 | 4.2184174777960813302913704999895155372 |
| 100 | 7.030695796326802217152284166649192562 |
| 3,000 | 210.920873889804066514568524489617670371 |
About Pound per Square Inch (psi)
The pound per square inch (psi) is the dominant pressure unit in US customary practice, equal to approximately 6,894.76 pascals. It is universally used in the United States for tire pressures, compressed-air systems, hydraulic machinery, pipe pressure ratings, and industrial gauges. Standard atmospheric pressure is 14.696 psi. Pressure is expressed as gauge (psig, relative to atmosphere) or absolute (psia). Natural gas pipeline pressures, boiler ratings, and municipal water supply pressures in the US are all quoted in psi.
Car tire inflation is typically 30–35 psi. A standard garden hose delivers water at 40–60 psi.
Etymology: A straightforward compound of "pound" (from Latin pondus, weight) and "square inch", arising naturally from US customary engineering practice. There is no single defining event; the unit crystallised alongside the development of American steam engineering in the early 19th century.
About Kilogram-force per Square Centimeter (kgf/cm²)
The kilogram-force per square centimeter (kgf/cm²) equals approximately 98,066.5 pascals and is colloquially called one "technical atmosphere" (at). Standard atmospheric pressure is 1.033 kgf/cm², making the unit an intuitive near-equivalent to atmospheric pressure. It is widely used in Japanese and Russian engineering standards for hydraulic systems, boilers, pressure vessels, and tire pressure specifications, and appears on many industrial gauges manufactured in Asia and Eastern Europe. The unit is not part of SI but remains prevalent in legacy equipment and transitional technical contexts.
Standard atmospheric pressure is approximately 1.033 kgf/cm². Industrial hydraulic presses typically operate at 100–300 kgf/cm².
Pound per Square Inch – Frequently Asked Questions
Why do race car teams obsess over half-psi differences in tire pressure?
Because at racing speeds, tiny pressure changes transform tire behavior. Half a psi less inflates the contact patch, generating more grip but also more heat — potentially pushing the rubber past its optimal temperature window within a few laps. Half a psi more stiffens the sidewall, improving response but shrinking the contact patch and reducing peak grip. Formula 1 teams adjust pressures in quarter-psi increments based on track temperature, fuel load, and stint length. In NASCAR, a 1 psi difference between left and right tires is a deliberate setup tool that changes how the car rotates through banked turns.
What psi should car and bicycle tires be inflated to?
Passenger car tires: 30–35 psi (check the door jamb sticker, not the tire sidewall — the sidewall shows the maximum, not the recommended). Truck tires: 80–100 psi. Road bike tires: 80–130 psi. Mountain bike tires: 25–35 psi. Under-inflation by just 5 psi increases fuel consumption by about 2% and accelerates edge wear. Over-inflation reduces grip and makes the ride harsh.
What is the difference between psi, psig, and psia?
PSI is the generic unit. PSIG ("gauge") means pressure above atmospheric — what your tire gauge reads. PSIA ("absolute") includes atmospheric pressure on top: PSIA = PSIG + 14.7. A tire at 32 psig is actually at 46.7 psia. The distinction matters in engineering calculations involving gas laws (PV=nRT uses absolute pressure) and in vacuum work where gauge readings go negative.
What psi range do common household and industrial systems use?
City water supply: 40–80 psi. Home espresso machine: ~130 psi (9 bar). Pressure washer: 1,000–4,000 psi. Scuba tank: 3,000 psi. Hydraulic car jack: 3,000–10,000 psi. Diesel fuel injector rail: up to 30,000 psi. Waterjet cutter: 60,000+ psi. The range from a garden hose to an industrial waterjet spans roughly three orders of magnitude.
How do you quickly convert between psi and bar in your head?
Divide psi by 14.5 to get bar, or multiply bar by 14.5 to get psi. For even quicker estimates: 15 psi ≈ 1 bar, 30 psi ≈ 2 bar, 45 psi ≈ 3 bar. This "15 psi per bar" shortcut is within 2% of exact and is used by mechanics, divers, and engineers worldwide when a calculator is not handy.
Kilogram-force per Square Centimeter – Frequently Asked Questions
What is a "technical atmosphere" and how does it relate to kgf/cm²?
One technical atmosphere (symbol "at") is defined as exactly 1 kgf/cm² — the pressure exerted by a 1 kg mass on a 1 cm² area under standard gravity. It equals 98,066.5 Pa, roughly 3.6% less than a standard atmosphere (101,325 Pa). Russian and Japanese engineering standards used it heavily through the 20th century, and you will still find it on older boiler plates, hydraulic presses, and pressure vessel nameplates across Asia and Eastern Europe.
Why do some pressure gauges in Asia still read kgf/cm² instead of bar or psi?
Japanese Industrial Standards (JIS) and Soviet-era GOST standards specified kgf/cm² for decades, and millions of gauges, compressors, and hydraulic machines built to those specs remain in service. Replacing a working gauge just to change the scale is wasteful, so factories keep using kgf/cm² alongside newer SI instruments. Modern JIS standards accept both, but legacy equipment is everywhere.
How do you convert kgf/cm² to psi or bar quickly?
Multiply kgf/cm² by 14.22 to get psi, or by 0.981 to get bar. For quick mental math: 1 kgf/cm² ≈ 1 bar ≈ 14.2 psi ≈ 1 atmosphere. The errors in those approximations are all under 4%, which is close enough for field work. For precision, use the exact factor: 1 kgf/cm² = 98,066.5 Pa.
What pressures in kgf/cm² are typical for hydraulic systems?
Small hydraulic jacks operate at 50–100 kgf/cm². Excavator hydraulics run at 250–350 kgf/cm². Industrial presses for stamping car body panels can reach 500–1,000 kgf/cm². The highest-pressure hydraulic systems — used in forging and isostatic pressing — operate above 3,000 kgf/cm², squeezing metal powder into near-net-shape parts.
Is kgf/cm² being phased out?
Officially, yes — the SI discourages kilogram-force entirely, and international standards bodies prefer pascals, bar, or psi. Practically, the phase-out is glacially slow. New equipment in Japan and Russia increasingly uses MPa or bar, but service manuals, legacy calibrations, and replacement parts will reference kgf/cm² for decades to come. Knowing the conversion (×0.0981 for MPa) remains a useful skill for anyone working with imported machinery.