Pound per Square Inch to Kilogram-force per Square Meter
psi
Kgf/m²
Conversion History
| Conversion | Reuse | Delete |
|---|---|---|
| No conversion history to show. | ||
Quick Reference Table (Pound per Square Inch to Kilogram-force per Square Meter)
| Pound per Square Inch (psi) | Kilogram-force per Square Meter (Kgf/m²) |
|---|---|
| 0.1 | 70.306957963268022171522545948790162 |
| 1 | 703.069579632680221715228518636540554 |
| 14.696 | 10,332.31054228186853832699634386974136 |
| 30 | 21,092.087388980406651456852499947577686 |
| 60 | 42,184.174777960813302913704999895155372 |
| 100 | 70,306.95796326802217152284166649192562 |
| 3,000 | 2,109,208.73889804066514568524489617670371 |
About Pound per Square Inch (psi)
The pound per square inch (psi) is the dominant pressure unit in US customary practice, equal to approximately 6,894.76 pascals. It is universally used in the United States for tire pressures, compressed-air systems, hydraulic machinery, pipe pressure ratings, and industrial gauges. Standard atmospheric pressure is 14.696 psi. Pressure is expressed as gauge (psig, relative to atmosphere) or absolute (psia). Natural gas pipeline pressures, boiler ratings, and municipal water supply pressures in the US are all quoted in psi.
Car tire inflation is typically 30–35 psi. A standard garden hose delivers water at 40–60 psi.
Etymology: A straightforward compound of "pound" (from Latin pondus, weight) and "square inch", arising naturally from US customary engineering practice. There is no single defining event; the unit crystallised alongside the development of American steam engineering in the early 19th century.
About Kilogram-force per Square Meter (Kgf/m²)
The kilogram-force per square meter (kgf/m²) equals approximately 9.807 pascals — 1/10,000 of a kgf/cm². It is most useful for very low pressures: the weight of snow or soil distributed over a flat roof, the static pressure of a shallow water layer, or ventilation duct pressure differences. Structural engineers calculating distributed loads on floors or roofs may reference kgf/m² in countries that have not fully transitioned to pascals. Standard atmospheric pressure equals approximately 10,332 kgf/m².
A 30 cm snowfall exerts roughly 150–300 kgf/m² on a roof depending on snow density. Standard atmospheric pressure is about 10,332 kgf/m².
Pound per Square Inch – Frequently Asked Questions
Why do race car teams obsess over half-psi differences in tire pressure?
Because at racing speeds, tiny pressure changes transform tire behavior. Half a psi less inflates the contact patch, generating more grip but also more heat — potentially pushing the rubber past its optimal temperature window within a few laps. Half a psi more stiffens the sidewall, improving response but shrinking the contact patch and reducing peak grip. Formula 1 teams adjust pressures in quarter-psi increments based on track temperature, fuel load, and stint length. In NASCAR, a 1 psi difference between left and right tires is a deliberate setup tool that changes how the car rotates through banked turns.
What psi should car and bicycle tires be inflated to?
Passenger car tires: 30–35 psi (check the door jamb sticker, not the tire sidewall — the sidewall shows the maximum, not the recommended). Truck tires: 80–100 psi. Road bike tires: 80–130 psi. Mountain bike tires: 25–35 psi. Under-inflation by just 5 psi increases fuel consumption by about 2% and accelerates edge wear. Over-inflation reduces grip and makes the ride harsh.
What is the difference between psi, psig, and psia?
PSI is the generic unit. PSIG ("gauge") means pressure above atmospheric — what your tire gauge reads. PSIA ("absolute") includes atmospheric pressure on top: PSIA = PSIG + 14.7. A tire at 32 psig is actually at 46.7 psia. The distinction matters in engineering calculations involving gas laws (PV=nRT uses absolute pressure) and in vacuum work where gauge readings go negative.
What psi range do common household and industrial systems use?
City water supply: 40–80 psi. Home espresso machine: ~130 psi (9 bar). Pressure washer: 1,000–4,000 psi. Scuba tank: 3,000 psi. Hydraulic car jack: 3,000–10,000 psi. Diesel fuel injector rail: up to 30,000 psi. Waterjet cutter: 60,000+ psi. The range from a garden hose to an industrial waterjet spans roughly three orders of magnitude.
How do you quickly convert between psi and bar in your head?
Divide psi by 14.5 to get bar, or multiply bar by 14.5 to get psi. For even quicker estimates: 15 psi ≈ 1 bar, 30 psi ≈ 2 bar, 45 psi ≈ 3 bar. This "15 psi per bar" shortcut is within 2% of exact and is used by mechanics, divers, and engineers worldwide when a calculator is not handy.
Kilogram-force per Square Meter – Frequently Asked Questions
What kinds of real-world loads are measured in kgf/m²?
Snow load on a roof, wind load on a wall, the weight of tiles on a floor — anything where a distributed mass presses on a large surface. A fresh 30 cm snowfall exerts roughly 150–300 kgf/m² depending on density. Structural engineers in countries still using this unit calculate whether a roof can handle a worst-case snow season by summing dead load plus live load in kgf/m².
How does kgf/m² compare to pascals?
1 kgf/m² equals approximately 9.807 Pa — essentially 10 Pa for quick estimates. So 1,000 kgf/m² ≈ 10 kPa. This near-ten relationship makes mental conversions straightforward: just shift the decimal one place and you are within 2% of the exact answer. That is close enough for construction load estimates.
Why is this unit sometimes written as "mm water column"?
Because 1 kgf/m² is almost exactly the pressure of a 1 mm column of water (which is 9.807 Pa). HVAC technicians measuring duct pressure with a water manometer read millimeters directly off the tube, and each millimeter corresponds to about 1 kgf/m². The two units are used interchangeably in low-pressure ventilation work.
How do engineers estimate kgf/m² snow load when snow density varies so much?
Fresh powder weighs about 30–50 kgf/m² per 30 cm depth, but wet compacted snow can hit 300–500 kgf/m² for the same depth — a tenfold difference. Engineers use regional ground snow load maps (based on decades of weather data) and then apply roof shape, slope, and exposure factors. A flat roof in Hokkaido might be designed for 350 kgf/m²; a steeply pitched Alpine roof for much less because snow slides off. The real danger is rain-on-snow events, where a rain-soaked snowpack can suddenly double its kgf/m² load overnight, occasionally collapsing roofs that survived the snowfall itself.
Is kgf/m² used outside of construction?
It appears in agricultural science (soil bearing pressure from tractor wheels), textile testing (fabric bursting strength at large contact areas), and aquaculture (pressure on submerged net panels from water current). Anywhere force is spread across a large area at relatively low intensity, kgf/m² can be more intuitive than pascals because people can picture kilograms of weight sitting on a square meter.