Pound per Square Inch to Newton per Square Centimeter
psi
N/cm²
Conversion History
| Conversion | Reuse | Delete |
|---|---|---|
| No conversion history to show. | ||
Quick Reference Table (Pound per Square Inch to Newton per Square Centimeter)
| Pound per Square Inch (psi) | Newton per Square Centimeter (N/cm²) |
|---|---|
| 0.1 | 0.068947572931043383122129 |
| 1 | 0.689475729310433831221293 |
| 14.696 | 10.13253531794613558362812 |
| 30 | 20.684271879313014936638787 |
| 60 | 41.368543758626029873277574 |
| 100 | 68.94757293104338312212929 |
| 3,000 | 2,068.427187931301493663878695 |
About Pound per Square Inch (psi)
The pound per square inch (psi) is the dominant pressure unit in US customary practice, equal to approximately 6,894.76 pascals. It is universally used in the United States for tire pressures, compressed-air systems, hydraulic machinery, pipe pressure ratings, and industrial gauges. Standard atmospheric pressure is 14.696 psi. Pressure is expressed as gauge (psig, relative to atmosphere) or absolute (psia). Natural gas pipeline pressures, boiler ratings, and municipal water supply pressures in the US are all quoted in psi.
Car tire inflation is typically 30–35 psi. A standard garden hose delivers water at 40–60 psi.
Etymology: A straightforward compound of "pound" (from Latin pondus, weight) and "square inch", arising naturally from US customary engineering practice. There is no single defining event; the unit crystallised alongside the development of American steam engineering in the early 19th century.
About Newton per Square Centimeter (N/cm²)
The newton per square centimeter (N/cm²) equals exactly 10,000 pascals. It is used in materials testing and mechanical engineering for compressive stress, tensile strength, and contact pressures at scales where pascals produce unwieldy six-digit values but megapascals are too coarse. Machine tool specifications, polymer yield strengths, and some hydraulic standards cite pressures in N/cm². One N/cm² is approximately one-tenth of standard atmospheric pressure.
The compressive strength of ordinary concrete is roughly 2–5 N/cm². A car tire contact patch experiences about 1.5–3 N/cm² of ground pressure.
Pound per Square Inch – Frequently Asked Questions
Why do race car teams obsess over half-psi differences in tire pressure?
Because at racing speeds, tiny pressure changes transform tire behavior. Half a psi less inflates the contact patch, generating more grip but also more heat — potentially pushing the rubber past its optimal temperature window within a few laps. Half a psi more stiffens the sidewall, improving response but shrinking the contact patch and reducing peak grip. Formula 1 teams adjust pressures in quarter-psi increments based on track temperature, fuel load, and stint length. In NASCAR, a 1 psi difference between left and right tires is a deliberate setup tool that changes how the car rotates through banked turns.
What psi should car and bicycle tires be inflated to?
Passenger car tires: 30–35 psi (check the door jamb sticker, not the tire sidewall — the sidewall shows the maximum, not the recommended). Truck tires: 80–100 psi. Road bike tires: 80–130 psi. Mountain bike tires: 25–35 psi. Under-inflation by just 5 psi increases fuel consumption by about 2% and accelerates edge wear. Over-inflation reduces grip and makes the ride harsh.
What is the difference between psi, psig, and psia?
PSI is the generic unit. PSIG ("gauge") means pressure above atmospheric — what your tire gauge reads. PSIA ("absolute") includes atmospheric pressure on top: PSIA = PSIG + 14.7. A tire at 32 psig is actually at 46.7 psia. The distinction matters in engineering calculations involving gas laws (PV=nRT uses absolute pressure) and in vacuum work where gauge readings go negative.
What psi range do common household and industrial systems use?
City water supply: 40–80 psi. Home espresso machine: ~130 psi (9 bar). Pressure washer: 1,000–4,000 psi. Scuba tank: 3,000 psi. Hydraulic car jack: 3,000–10,000 psi. Diesel fuel injector rail: up to 30,000 psi. Waterjet cutter: 60,000+ psi. The range from a garden hose to an industrial waterjet spans roughly three orders of magnitude.
How do you quickly convert between psi and bar in your head?
Divide psi by 14.5 to get bar, or multiply bar by 14.5 to get psi. For even quicker estimates: 15 psi ≈ 1 bar, 30 psi ≈ 2 bar, 45 psi ≈ 3 bar. This "15 psi per bar" shortcut is within 2% of exact and is used by mechanics, divers, and engineers worldwide when a calculator is not handy.
Newton per Square Centimeter – Frequently Asked Questions
When would an engineer use N/cm² instead of megapascals or bar?
N/cm² sits in a sweet spot for materials testing and contact mechanics. Concrete compressive strength (2–5 N/cm²), rubber hardness testing, and tire contact patch pressures all land in single- or double-digit N/cm² values. Megapascals would give fractions; bare pascals would give five-digit numbers. The unit is not common in consumer contexts, but it shows up on lab equipment and technical data sheets for polymers and composites.
How do you convert N/cm² to more common pressure units?
1 N/cm² = 10,000 Pa = 10 kPa = 0.1 bar ≈ 1.45 psi. The factor of 10,000 comes from the area: one square centimeter is 0.0001 m², so concentrating a newton on that smaller area multiplies the pressure by 10,000 compared with N/m². For quick field estimates, just remember 1 N/cm² ≈ 1.5 psi.
What is the pressure under a car tire in N/cm²?
Typical car tire inflation pressure is 2.0–2.5 bar, which is 20–25 N/cm². But the ground contact pressure depends on tire design and load distribution — it is usually close to the inflation pressure, so roughly 2–3 N/cm² for a passenger car. Heavy trucks with higher inflation pressures can exert 6–8 N/cm², which is why truck-rated roads need thicker pavement.
Is N/cm² related to the old "kilogram-force per square centimeter" unit?
Yes — 1 kgf/cm² ≈ 9.81 N/cm². The kgf/cm² was popular in older engineering because 1 kgf equals the force of gravity on 1 kg, making it intuitive. The N/cm² is the metrically cleaner successor: it uses newtons (SI force) instead of kilogram-force (a non-SI unit). In practice you will see both on older Asian and European equipment.
What N/cm² values represent the strength of common materials?
Soft rubber fails at about 1–2 N/cm². Ordinary concrete withstands 2–5 N/cm² in compression. Hardwood can take 4–6 N/cm². Mild steel yields at roughly 25,000 N/cm² (250 MPa). These numbers show why materials scientists prefer MPa for metals and GPa for ceramics — N/cm² stays practical mainly for softer materials and moderate-pressure systems.