Pound per Square Inch to Pound per Square Foot
psi
psf
Conversion History
| Conversion | Reuse | Delete |
|---|---|---|
| No conversion history to show. | ||
Quick Reference Table (Pound per Square Inch to Pound per Square Foot)
| Pound per Square Inch (psi) | Pound per Square Foot (psf) |
|---|---|
| 0.1 | 14.400000000000024821126194645743815889 |
| 1 | 144.000000000000248211262573020465159213 |
| 14.696 | 2,116.22400000000364771271437043758396092 |
| 30 | 4,320.000000000007446337876564050927776067 |
| 60 | 8,640.000000000014892675753128101855552134 |
| 100 | 14,400.00000000002482112625521350309258689 |
| 3,000 | 432,000.000000000744633787655360821065939495 |
About Pound per Square Inch (psi)
The pound per square inch (psi) is the dominant pressure unit in US customary practice, equal to approximately 6,894.76 pascals. It is universally used in the United States for tire pressures, compressed-air systems, hydraulic machinery, pipe pressure ratings, and industrial gauges. Standard atmospheric pressure is 14.696 psi. Pressure is expressed as gauge (psig, relative to atmosphere) or absolute (psia). Natural gas pipeline pressures, boiler ratings, and municipal water supply pressures in the US are all quoted in psi.
Car tire inflation is typically 30–35 psi. A standard garden hose delivers water at 40–60 psi.
Etymology: A straightforward compound of "pound" (from Latin pondus, weight) and "square inch", arising naturally from US customary engineering practice. There is no single defining event; the unit crystallised alongside the development of American steam engineering in the early 19th century.
About Pound per Square Foot (psf)
The pound per square foot (psf) is a US customary unit equal to 1/144 of a psi, approximately 47.88 pascals. It is used in civil and structural engineering for soil bearing capacity, roof snow loads, wind loads on building envelopes, and floor live-load ratings in US building codes (IBC). Standard atmospheric pressure is approximately 2,116 psf. The unit is convenient for building loads that are naturally distributed over large floor or wall areas.
US building codes require residential floors to support at least 40 psf live load. A 50 mph wind exerts roughly 6–10 psf of pressure on a building facade.
Pound per Square Inch – Frequently Asked Questions
Why do race car teams obsess over half-psi differences in tire pressure?
Because at racing speeds, tiny pressure changes transform tire behavior. Half a psi less inflates the contact patch, generating more grip but also more heat — potentially pushing the rubber past its optimal temperature window within a few laps. Half a psi more stiffens the sidewall, improving response but shrinking the contact patch and reducing peak grip. Formula 1 teams adjust pressures in quarter-psi increments based on track temperature, fuel load, and stint length. In NASCAR, a 1 psi difference between left and right tires is a deliberate setup tool that changes how the car rotates through banked turns.
What psi should car and bicycle tires be inflated to?
Passenger car tires: 30–35 psi (check the door jamb sticker, not the tire sidewall — the sidewall shows the maximum, not the recommended). Truck tires: 80–100 psi. Road bike tires: 80–130 psi. Mountain bike tires: 25–35 psi. Under-inflation by just 5 psi increases fuel consumption by about 2% and accelerates edge wear. Over-inflation reduces grip and makes the ride harsh.
What is the difference between psi, psig, and psia?
PSI is the generic unit. PSIG ("gauge") means pressure above atmospheric — what your tire gauge reads. PSIA ("absolute") includes atmospheric pressure on top: PSIA = PSIG + 14.7. A tire at 32 psig is actually at 46.7 psia. The distinction matters in engineering calculations involving gas laws (PV=nRT uses absolute pressure) and in vacuum work where gauge readings go negative.
What psi range do common household and industrial systems use?
City water supply: 40–80 psi. Home espresso machine: ~130 psi (9 bar). Pressure washer: 1,000–4,000 psi. Scuba tank: 3,000 psi. Hydraulic car jack: 3,000–10,000 psi. Diesel fuel injector rail: up to 30,000 psi. Waterjet cutter: 60,000+ psi. The range from a garden hose to an industrial waterjet spans roughly three orders of magnitude.
How do you quickly convert between psi and bar in your head?
Divide psi by 14.5 to get bar, or multiply bar by 14.5 to get psi. For even quicker estimates: 15 psi ≈ 1 bar, 30 psi ≈ 2 bar, 45 psi ≈ 3 bar. This "15 psi per bar" shortcut is within 2% of exact and is used by mechanics, divers, and engineers worldwide when a calculator is not handy.
Pound per Square Foot – Frequently Asked Questions
Why do structural engineers use pounds per square foot instead of psi?
Because building loads — snow, wind, furniture, people — are naturally distributed over large floor and wall areas measured in square feet. A residential floor designed for 40 psf live load makes intuitive sense: imagine 40 pounds sitting on each square foot of carpet. Converting to psi (0.278 psi) gives a fraction that obscures the physical picture. The US International Building Code specifies all loads in psf for this reason.
What psf loads do US building codes require for different spaces?
Residential living areas: 40 psf. Office floors: 50 psf. Retail stores: 75–100 psf. Library stack rooms: 150 psf. Heavy manufacturing: 250+ psf. Balconies and decks: 60 psf minimum. Roofs must handle snow load (varies by region — 20 psf in Atlanta, 50+ psf in Minnesota) plus a minimum 20 psf construction live load. These values have decades of structural failure data baked into them.
How do you convert psf to psi or pascals?
1 psf = 1/144 psi ≈ 0.00694 psi = 47.88 Pa. To go from psi to psf, multiply by 144 (since 1 ft² = 144 in²). Standard atmospheric pressure is about 2,116 psf — which demonstrates why the unit is sized for building loads, not gas pressures. For international projects, multiply psf by 47.88 to get pascals, or by roughly 4.88 to get kgf/m².
How much wind pressure in psf does a building actually experience?
Wind pressure scales with the square of wind speed. At 70 mph: about 12 psf. At 100 mph: ~25 psf. At 150 mph (Category 4 hurricane): ~56 psf. Building codes apply additional factors for height, exposure, and shape — a tall building in open terrain sees higher effective psf than a squat building sheltered by trees. Cladding and windows are tested against these design pressures before installation.
Is psf used outside the United States?
Rarely. Most countries use kilopascals (kPa) or kilonewtons per square meter (kN/m²) for structural loads — both are SI-compatible and numerically equivalent (1 kPa = 1 kN/m²). The psf is essentially a US-only unit, found in IBC (International Building Code, despite the name) and ASCE 7 load standards. Engineers working on international projects routinely convert psf to kPa by multiplying by 0.04788.