Becquerel to Millicurie
Bq
mCi
Conversion History
| Conversion | Reuse | Delete |
|---|---|---|
| No conversion history to show. | ||
Quick Reference Table (Becquerel to Millicurie)
| Becquerel (Bq) | Millicurie (mCi) |
|---|---|
| 1 | 0.000000027027027027027 |
| 10 | 0.00000027027027027027 |
| 100 | 0.0000027027027027027 |
| 1,000 | 0.000027027027027027 |
| 10,000 | 0.00027027027027027 |
| 37,000 | 0.000999999999999999 |
About Becquerel (Bq)
The becquerel (Bq) is the SI unit of radioactive activity, defined as exactly one nuclear disintegration per second. It is a very small unit: one gram of potassium (present in every human body) has an activity of roughly 30 Bq from its naturally occurring K-40 content; a banana contributes about 15 Bq. The becquerel replaced the curie in SI-adopting countries after 1975, though the curie persists in the United States and older literature. Because Bq is small, practical measurements more often use kilobecquerel, megabecquerel, or gigabecquerel. Regulatory food contamination limits are typically expressed in Bq/kg; drinking water limits in Bq/L. Activity in Bq does not indicate radiation dose — that requires knowing the isotope and radiation type.
A typical human body contains about 4,000–5,000 Bq of K-40 and 3,000–4,000 Bq of C-14. The WHO guideline for tritium in drinking water is 10,000 Bq/L.
Etymology: Named after Antoine Henri Becquerel (1852–1908), French physicist who discovered radioactivity in 1896 when he found that uranium salts fogged a photographic plate without exposure to sunlight. He shared the 1903 Nobel Prize in Physics with Pierre and Marie Curie. The unit was adopted by the CGPM in 1975.
About Millicurie (mCi)
The millicurie (mCi) equals one thousandth of a curie, or 37 million becquerels (37 MBq). It is the practical unit for nuclear medicine diagnostic doses, radiopharmaceutical dispensing, and therapeutic low-activity sealed sources. A Tc-99m bone scan dose of approximately 500–800 MBq corresponds to 13–22 mCi. Iodine-131 given for hyperthyroidism treatment is prescribed in millicurie doses — typically 5–15 mCi (185–555 MBq). Diagnostic nuclear cardiology stress tests use 8–30 mCi of Tl-201 or Tc-99m sestamibi. Radiopharmacy unit dose syringes are labelled in both mCi and MBq to serve US and international prescribing conventions. Material possession in the millicurie range requires formal radioactive material licensing in most countries.
A Tc-99m bone scan uses about 20–25 mCi (740–925 MBq). Radioiodine therapy for hyperthyroidism is typically 5–15 mCi of I-131.
Becquerel – Frequently Asked Questions
How radioactive is a banana and why do people keep bringing it up?
A single banana contains about 15 Bq of potassium-40, which led to the informal "banana equivalent dose" — a tongue-in-cheek way to put radiation exposure in perspective. It caught on because it makes an invisible phenomenon suddenly tangible. But the comparison has limits: your body tightly regulates potassium levels, so eating more bananas does not actually increase your internal K-40 inventory. You just excrete the excess.
Why did the becquerel replace the curie as the standard unit of radioactivity?
The 1975 General Conference on Weights and Measures adopted the becquerel as part of the push to make all scientific measurement coherent under the SI system. The curie was awkwardly large (3.7 × 10¹⁰ disintegrations per second) and defined by a specific material — radium-226 — rather than a fundamental quantity. One becquerel equals exactly one decay per second, which is conceptually cleaner even if impractically small for everyday use.
If my body contains thousands of becquerels of radioactivity, why am I not in danger?
A typical human body carries about 7,000–8,000 Bq from naturally occurring potassium-40 and carbon-14. This sounds alarming until you realize that activity (how many atoms decay per second) is not the same as dose (how much energy those decays deposit in tissue). The radiation from K-40 delivers roughly 0.17 millisieverts per year — a tiny fraction of the 2.4 mSv annual background. Your cells repair low-level DNA damage constantly; it is the rate and type of damage that matters, not the raw count of decays.
What is the difference between radioactivity measured in becquerels and radiation dose measured in sieverts?
Becquerels count events — how many atoms disintegrate per second in a source. Sieverts measure the biological consequence of radiation absorbed by a person. A million-becquerel source locked in a lead safe delivers essentially zero sieverts to someone standing outside. The same source ingested could deliver a significant dose. You need to know the isotope, the radiation type, and the exposure pathway to go from Bq to Sv.
Why are food contamination limits expressed in becquerels per kilogram rather than some other unit?
Bq/kg tells regulators exactly how many radioactive decays are occurring per second in each kilogram of food, which can then be converted to an ingestion dose using well-established dose coefficients for each isotope. The EU limit for caesium-137 in food after a nuclear accident is 1,250 Bq/kg; Japan set a much stricter 100 Bq/kg post-Fukushima. The unit is universal, isotope-neutral, and directly measurable with a gamma spectrometer — no assumptions about the consumer needed.
Millicurie – Frequently Asked Questions
What happens if a nuclear medicine patient dies — is the body radioactive?
Yes, and it creates real problems. If a patient who received therapeutic I-131 (30–200 mCi) dies within days, the body can trigger radiation alarms at funeral homes and crematoria. Cremation is the bigger concern — burning the body aerosolises the isotope, contaminating the crematorium and potentially exposing workers. Most radiation safety programs require a waiting period before cremation, or direct burial with notification to the funeral director. In 2019, an Arizona crematorium unknowingly cremated a patient with residual lutetium-177, contaminating the facility. Hospitals are supposed to flag these cases, but the system is imperfect.
How does a nuclear pharmacy calibrate and dispense a millicurie dose accurately?
The radiopharmacist draws the Tc-99m solution into a syringe, places it in a dose calibrator (a pressurized argon ionisation chamber), and reads the activity in mCi or MBq. Because the isotope is decaying constantly — Tc-99m loses half its activity every 6 hours — the calibrator reading must be decay-corrected to the planned injection time. If the scan is at 2pm and the dose is drawn at 10am, the pharmacist dispenses more than the prescribed 20 mCi, knowing it will decay to exactly 20 mCi by injection. Timing is everything.
What is the most common nuclear medicine scan and how much radioactivity does it involve?
The Tc-99m bone scan, with about 20–25 mCi (740–925 MBq) injected intravenously. Technetium-99m accumulates in areas of high bone turnover — fractures, infections, metastases — and emits 140 keV gamma rays that a gamma camera images. The scan itself takes 2–3 hours (allowing time for the tracer to distribute), and the patient's radioactivity drops to negligible levels within 24–48 hours. Over 30 million Tc-99m procedures are performed worldwide each year, making it by far the most-used medical radioisotope.
Can you fly or go through airport security after a nuclear medicine scan?
Technically yes, but radiation detectors at airports, borders, and government buildings may alarm for days after certain scans. A patient who received 10 mCi of I-131 can trigger a portal monitor for up to 3 months. Most nuclear medicine departments provide a wallet card explaining the procedure, isotope, and date — TSA and customs agents are trained to recognize these. The actual radiation risk to fellow passengers is negligible; the issue is entirely about security system sensitivity, not safety.
Why is radioiodine for hyperthyroidism given in millicuries but radioiodine for cancer in much larger doses?
Hyperthyroidism treatment aims to kill just enough thyroid tissue to normalize hormone production — typically 5–15 mCi (185–555 MBq) of I-131. Thyroid cancer ablation aims to destroy every remaining thyroid cell after surgery and kill any metastases — that takes 30–200 mCi (1.1–7.4 GBq). The higher doses require inpatient isolation and more aggressive radiation safety precautions. Some oncologists are exploring whether lower ablation doses (30 mCi) work as well as high ones (100+ mCi) for low-risk cancers — the evidence is surprisingly close.