Rutherford to Millicurie
Rd
mCi
Conversion History
| Conversion | Reuse | Delete |
|---|---|---|
| No conversion history to show. | ||
Quick Reference Table (Rutherford to Millicurie)
| Rutherford (Rd) | Millicurie (mCi) |
|---|---|
| 1 | 0.027027027027027 |
| 10 | 0.27027027027027 |
| 100 | 2.7027027027027 |
| 370 | 9.99999999999999 |
| 1,000 | 27.027027027027 |
| 10,000 | 270.27027027027 |
About Rutherford (Rd)
The rutherford (Rd) is an obsolete non-SI unit of radioactive activity equal to one million disintegrations per second — exactly 10⁶ Bq or 1 MBq. It was proposed in the 1940s as a more practical middle ground between the very small becquerel and the very large curie, and was briefly used in some European nuclear physics literature. The rutherford never gained wide adoption and was superseded by the becquerel when the SI system standardized radioactivity units in 1975. It now appears only in historical documents and unit conversion tools. The prefix system (kilorutherford, megarutherford) was also proposed but never standardized, and the unit is considered fully obsolete in modern scientific and regulatory contexts.
One rutherford equals exactly 1 MBq — the activity typical of a single nuclear medicine dose unit of a short-lived diagnostic isotope. The unit is no longer used in practice.
Etymology: Named after Ernest Rutherford (1871–1937), New Zealand-born physicist who established the nuclear model of the atom, discovered alpha and beta radiation types, and first achieved artificial nuclear transmutation. He won the Nobel Prize in Chemistry in 1908. The unit proposed in his honor was formally obsoleted in 1975.
About Millicurie (mCi)
The millicurie (mCi) equals one thousandth of a curie, or 37 million becquerels (37 MBq). It is the practical unit for nuclear medicine diagnostic doses, radiopharmaceutical dispensing, and therapeutic low-activity sealed sources. A Tc-99m bone scan dose of approximately 500–800 MBq corresponds to 13–22 mCi. Iodine-131 given for hyperthyroidism treatment is prescribed in millicurie doses — typically 5–15 mCi (185–555 MBq). Diagnostic nuclear cardiology stress tests use 8–30 mCi of Tl-201 or Tc-99m sestamibi. Radiopharmacy unit dose syringes are labelled in both mCi and MBq to serve US and international prescribing conventions. Material possession in the millicurie range requires formal radioactive material licensing in most countries.
A Tc-99m bone scan uses about 20–25 mCi (740–925 MBq). Radioiodine therapy for hyperthyroidism is typically 5–15 mCi of I-131.
Rutherford – Frequently Asked Questions
Why did the rutherford unit fail to catch on when it seems like a sensible middle ground?
The rutherford was proposed in the 1940s when the curie was the only game in town and was inconveniently large for many lab measurements. At 10⁶ dps (1 MBq), the rutherford sat in a useful range. But the 1975 SI reform chose the becquerel (1 dps) as the base unit with standard SI prefixes — kBq, MBq, GBq — which covered every scale. Having both the rutherford and the megabecquerel for the same quantity was redundant. The scientific community picked one, and the rutherford quietly disappeared from everything except unit conversion tables and physics trivia.
Who was Ernest Rutherford and why does nuclear physics owe him so much?
Rutherford discovered the atomic nucleus by firing alpha particles at gold foil (1911), identified alpha and beta radiation as distinct particle types, and performed the first artificial nuclear transmutation — turning nitrogen into oxygen — in 1917. He won the Nobel Prize in Chemistry in 1908, which famously annoyed him because he considered himself a physicist. His students went on to split the atom (Cockcroft and Walton) and discover the neutron (Chadwick). Nearly every branch of nuclear science traces back to his Manchester and Cambridge laboratories.
Are there other obsolete radioactivity units besides the rutherford?
Several. The stat (1 disintegration per second, identical to the becquerel but proposed earlier), the eman (used for radon concentration in water, equal to 10⁻¹⁰ Ci/L), and the mache unit (another radon measure used in Austrian and German spa water literature) are all effectively extinct. The curie itself is technically obsolete under SI but persists through sheer institutional momentum in the US. The pattern is typical of measurement science: every era invents its own units, and standardisation eventually consolidates them.
If 1 rutherford equals 1 MBq, could someone accidentally confuse the two in old literature?
Unlikely in practice because the rutherford disappeared from active use by the 1970s, before the megabecquerel entered common parlance in the 1980s. You would only encounter the rutherford in papers from roughly 1946–1970, primarily in European nuclear physics journals. If you see "Rd" in a modern unit conversion tool, it is there for completeness and historical interest, not because anyone is publishing in rutherfords. The real risk of confusion in old literature is between the curie and the becquerel, where a missing prefix can mean a billionfold error.
What is the strangest or most obscure unit of radioactivity ever proposed?
The "sunshine unit" — officially the strontium unit — was coined by the US Atomic Energy Commission in the 1950s to describe strontium-90 concentration in bones and milk during nuclear weapons testing. One sunshine unit equalled 1 picocurie of Sr-90 per gram of calcium. The name was a deliberate PR choice to make fallout contamination sound cheerful and harmless. It backfired spectacularly when journalists mocked it as Orwellian doublespeak, and the term was quietly dropped in favor of pCi/g Ca. It remains a cautionary tale about naming units for political rather than scientific reasons.
Millicurie – Frequently Asked Questions
What happens if a nuclear medicine patient dies — is the body radioactive?
Yes, and it creates real problems. If a patient who received therapeutic I-131 (30–200 mCi) dies within days, the body can trigger radiation alarms at funeral homes and crematoria. Cremation is the bigger concern — burning the body aerosolises the isotope, contaminating the crematorium and potentially exposing workers. Most radiation safety programs require a waiting period before cremation, or direct burial with notification to the funeral director. In 2019, an Arizona crematorium unknowingly cremated a patient with residual lutetium-177, contaminating the facility. Hospitals are supposed to flag these cases, but the system is imperfect.
How does a nuclear pharmacy calibrate and dispense a millicurie dose accurately?
The radiopharmacist draws the Tc-99m solution into a syringe, places it in a dose calibrator (a pressurized argon ionisation chamber), and reads the activity in mCi or MBq. Because the isotope is decaying constantly — Tc-99m loses half its activity every 6 hours — the calibrator reading must be decay-corrected to the planned injection time. If the scan is at 2pm and the dose is drawn at 10am, the pharmacist dispenses more than the prescribed 20 mCi, knowing it will decay to exactly 20 mCi by injection. Timing is everything.
What is the most common nuclear medicine scan and how much radioactivity does it involve?
The Tc-99m bone scan, with about 20–25 mCi (740–925 MBq) injected intravenously. Technetium-99m accumulates in areas of high bone turnover — fractures, infections, metastases — and emits 140 keV gamma rays that a gamma camera images. The scan itself takes 2–3 hours (allowing time for the tracer to distribute), and the patient's radioactivity drops to negligible levels within 24–48 hours. Over 30 million Tc-99m procedures are performed worldwide each year, making it by far the most-used medical radioisotope.
Can you fly or go through airport security after a nuclear medicine scan?
Technically yes, but radiation detectors at airports, borders, and government buildings may alarm for days after certain scans. A patient who received 10 mCi of I-131 can trigger a portal monitor for up to 3 months. Most nuclear medicine departments provide a wallet card explaining the procedure, isotope, and date — TSA and customs agents are trained to recognize these. The actual radiation risk to fellow passengers is negligible; the issue is entirely about security system sensitivity, not safety.
Why is radioiodine for hyperthyroidism given in millicuries but radioiodine for cancer in much larger doses?
Hyperthyroidism treatment aims to kill just enough thyroid tissue to normalize hormone production — typically 5–15 mCi (185–555 MBq) of I-131. Thyroid cancer ablation aims to destroy every remaining thyroid cell after surgery and kill any metastases — that takes 30–200 mCi (1.1–7.4 GBq). The higher doses require inpatient isolation and more aggressive radiation safety precautions. Some oncologists are exploring whether lower ablation doses (30 mCi) work as well as high ones (100+ mCi) for low-risk cancers — the evidence is surprisingly close.