US liquid gallon to Cubic foot

gal

1 gal

ft³

0.13368055555395139908 ft³

Conversion History

ConversionReuseDelete
No conversion history to show.

Entries per page:

0–0 of 0


Quick Reference Table (US liquid gallon to Cubic foot)

US liquid gallon (gal)Cubic foot (ft³)
0.50.06684027777697569954
10.13368055555395139908
20.26736111110790279816
50.66840277776975699541
101.33680555553951399082
506.68402777769756995409

About US liquid gallon (gal)

The US liquid gallon is a unit of volume equal to 4 quarts, 8 pints, or 128 US fluid ounces, approximately 3.785 liters. It is the primary large liquid volume unit in the United States, used for fuel pricing at the pump, milk and juice packaging, and paint. US fuel economy is measured in miles per gallon (MPG). The US gallon is about 17% smaller than the UK imperial gallon (4.546 L), causing significant differences in fuel economy comparisons.

A gallon jug of milk is 3.785 L. Petrol (gasoline) is priced per US gallon at every US fuel station.

About Cubic foot (ft³)

A cubic foot (ft³) is the volume of a cube with 1-foot sides, equal to approximately 28.317 liters or 7.48 US gallons. It is used in the United States for natural gas billing, refrigerator capacity, aquarium size, concrete orders, and shipping container dimensions. Refrigerators are rated in cubic feet of storage, natural gas consumption is billed in cubic feet, and HVAC airflow is measured in cubic feet per minute (CFM).

A full-size refrigerator is typically 18–28 ft³. Natural gas is billed in CCF (hundreds of cubic feet) in the US.


US liquid gallon – Frequently Asked Questions

US fuel infrastructure — pumps, tax law, pipeline contracts, and consumer expectations — is built around the gallon. Federal and state fuel taxes are levied per gallon; EPA fuel economy standards use miles per gallon; and consumers benchmark prices against a gallon reference ("$3 a gallon"). Switching to liters would require reprogramming every pump, rewriting tax code, and re-educating 330 million people who compare prices by the gallon. Canada made the switch in the 1970s during a broader metrication push, but the US never had the political will for a comprehensive changeover.

The US gallon (3.785 L) is based on the Queen Anne wine gallon of 1707 (231 cubic inches). The UK imperial gallon (4.546 L) was defined in 1824 as the volume of 10 pounds of water. The two systems diverged after US independence.

To convert: L/100km = 235.2 ÷ MPG (US). A car achieving 30 MPG uses about 7.8 L/100km. UK MPG values are always higher than US MPG for the same car because the imperial gallon is larger.

Recommended daily water intake is about 2–3 liters (roughly 0.5–0.8 US gallons). The commonly cited "8 glasses a day" ≈ 64 fl oz ≈ 0.5 gallons ≈ 1.9 liters.

Most US passenger cars have fuel tanks of 10–20 gallons (38–76 liters). Compact cars are typically 10–13 gallons; mid-size cars 14–17 gallons; SUVs and trucks 18–36 gallons.

Cubic foot – Frequently Asked Questions

One cubic foot equals approximately 28.317 liters. Since 1 foot = 30.48 cm, 1 ft³ = 30.48³ cm³ = 28,316.8 cm³ = 28.317 liters.

The US gas industry adopted cubic feet before metrication became widespread. Natural gas is billed in CCF (hundred cubic feet) or therms (≈ 100 ft³ by energy content). Metric countries use cubic meters.

Refrigerator capacity is rated in cubic feet of internal storage. A compact dorm fridge is 1–4 ft³; a standard family fridge is 18–22 ft³; a large French door model can exceed 28 ft³.

CFM measures volumetric airflow rate. HVAC systems, range hoods, and fans are rated in CFM. A typical home range hood requires 100–600 CFM; a whole-home HVAC system might move 2,000 CFM.

One cubic foot equals approximately 7.48 US liquid gallons. This is commonly used in plumbing, aquarium sizing, and pool volume calculations.

© 2026 TopConverters.com. All rights reserved.