Megatons of TNT to British Thermal Units (IT)

One megaton equals 4.184 × 10¹⁵ joules — the energy of burning about 120 million liters of petrol or the total electricity output of a large power plant running for 50 days. A 1-megaton airburst would flatten reinforced concrete buildings within 2 km, cause third-degree burns at 10 km, and break windows at 40+ km. It is roughly 67 times the Hiroshima bomb.

The Soviet AN602 "Tsar Bomba," detonated on 30 October 1961, yielded approximately 50 megatons — the largest human-made explosion in history. It was a three-stage thermonuclear device originally designed for 100 Mt but scaled down by replacing the uranium tamper with lead to reduce fallout. The fireball was 8 km wide, and the mushroom cloud rose 67 km. It was a propaganda weapon with no practical military use.

Modern strategic warheads are smaller than Cold War designs because accuracy improved. The US W88 yields about 0.475 Mt; the W76-1 about 0.1 Mt. Russian RS-28 Sarmat MIRVs carry warheads estimated at 0.5–0.8 Mt each. Military planners found that several smaller warheads (MIRVs) destroy more area than one large one due to the cube-root scaling of blast radius with yield.

The Chicxulub impact that ended the dinosaurs released roughly 100 million megatons (10²³ J). The Tunguska event (1908) was 3–15 megatons. NASA's planetary defense threshold is objects capable of 1+ megatons of damage. A 50-meter iron asteroid striking Earth at 20 km/s would release about 10 megatons — enough to obliterate a major city.

Accuracy replaced raw yield. A 0.5 Mt warhead landing within 100 meters of a target destroys it just as effectively as a 10 Mt warhead landing 1 km away. MIRVed missiles carrying 6–10 smaller warheads also cover more total area than one massive bomb. The US retired its last megaton-class warhead (the B83) in 2022, relying entirely on sub-megaton weapons.

BTU/hour expresses cooling or heating power, not energy alone. A 12,000 BTU(IT)/h rating corresponds to approximately 3,517 W of thermal power. Watts can describe thermal power as well as electrical input; the two quantities must not be confused. An air conditioner's electrical input depends on its efficiency and operating conditions, rather than being the same as its cooling capacity.

A rough rule of thumb is 20 BTU per square foot of living space in a temperate climate. A 300 sq ft bedroom needs about 6,000 BTU/h; a 1,500 sq ft open-plan living area needs roughly 30,000 BTU/h. Actual requirements vary with insulation, ceiling height, climate zone, and window area. Poorly insulated older homes may need 30–40 BTU per square foot.

BTU is a unit of energy (heat); BTU/h is a unit of power (rate of heat flow). When an air conditioner is labelled "12,000 BTU," the industry shorthand actually means 12,000 BTU per hour. Technically one BTU equals about 1,055 joules of energy, while 1 BTU/h equals about 0.293 watts. The distinction matters for energy calculations but is routinely blurred in product marketing.

Natural gas energy quantities may be billed in millions of BTU (MMBtu) or therms. A therm nominally represents 100,000 BTU, but the legal U.S. and EC therm variants have their own fixed joule definitions. This converter keeps those therm variants separate; neither should be assumed to equal exactly 100,000 BTU(IT). Always check the unit convention used on the bill.

The UK metricated energy units in the 1970s–1990s, switching gas billing from therms (100,000 BTU) to kilowatt-hours and scientific work to joules. The "British" in BTU reflects 19th-century British steam engineering origins, not current usage. Today the BTU is almost exclusively an American unit, used for HVAC, gas pricing, and appliance ratings across the US.