Megaampere to Gilbert
mA
Gi
Conversion History
| Conversion | Reuse | Delete |
|---|---|---|
| No conversion history to show. | ||
Quick Reference Table (Megaampere to Gilbert)
| Megaampere (mA) | Gilbert (Gi) |
|---|---|
| 1 | 1,256,636.6121077 |
| 5 | 6,283,183.0605385 |
| 10 | 12,566,366.121077 |
| 15 | 18,849,549.1816155 |
| 26 | 32,672,551.9148002 |
| 100 | 125,663,661.21077 |
About Megaampere (mA)
The megaampere (MA) equals one million amperes and occurs only in extreme natural events and large-scale research facilities. Tokamak fusion reactors drive plasma currents of 1–15 MA to achieve the magnetic confinement required for nuclear fusion. Pulsed-power facilities use megaampere-class discharges to compress metal liners, study shock physics, or drive Z-pinch plasmas — at these currents, magnetic forces are sufficient to crush metal cylinders in microseconds. The most energetic lightning superbolts are estimated to approach 1 MA. No engineered steady-state system produces megaampere currents continuously.
The Z Machine at Sandia National Laboratories discharges up to 26 MA. The ITER fusion reactor is designed to sustain plasma currents of about 15 MA.
About Gilbert (Gi)
The gilbert (Gi) equals 10/(4π) amperes — approximately 0.7958 A — and is the CGS-EMU unit of magnetomotive force (MMF) rather than a general-purpose current unit. In magnetic circuit analysis, MMF drives magnetic flux through a reluctance, analogously to how voltage drives current through resistance. A single-turn coil carrying 1 Gi of MMF passes 0.7958 A. In SI, magnetomotive force is measured in ampere-turns (A·T). The gilbert is obsolete but historically significant in transformer design, relay engineering, and magnetic circuit analysis dating from the late 19th century through the 1960s.
A relay coil requiring 2 Gi of MMF to actuate needs about 1.6 A·turn in SI terms. Vintage transformer and relay datasheets from the 1940s–1960s often specify MMF in gilberts.
Etymology: Named after William Gilbert (1544–1603), English physician and natural philosopher who authored De Magnete (1600), the first systematic scientific study of magnetism and electricity, establishing that the Earth itself acts as a giant magnet.
Megaampere – Frequently Asked Questions
How does the Z Machine at Sandia produce 26 million amps?
The Z Machine stores energy in massive capacitor banks (about 22 MJ) then discharges it through a converging array of transmission lines into a tiny central target in roughly 100 nanoseconds. The extremely short pulse duration means the instantaneous current reaches 26 MA, but only for microseconds. The peak power briefly exceeds 80 TW — more than the entire world's electrical grid.
What does a megaampere of current do to matter?
At megaampere levels, the magnetic field generated by the current itself becomes an overwhelming force. In Z-pinch experiments, the current's own magnetic field crushes a metal cylinder inward at velocities exceeding 600 km/s, reaching pressures found inside giant planets. The material is compressed, heated to millions of degrees, and emits intense X-rays.
Why does a fusion reactor need megaamperes of plasma current?
In a tokamak, the plasma current generates a poloidal magnetic field that, combined with external toroidal fields, creates the helical field geometry needed to confine plasma at 150 million degrees C. ITER needs 15 MA to maintain this confinement long enough for deuterium-tritium fusion to produce net energy.
Could a lightning superbolt reach megaampere levels?
The most extreme positive lightning superbolts — occurring over oceans and detected by satellite — may briefly reach 0.5–1 MA peak current. These are extraordinarily rare, representing perhaps 1 in 1,000,000 lightning strokes. A typical bolt is "only" 20–30 kA, about 50 times weaker.
How do scientists measure megaampere currents?
Nobody puts a clamp meter around 26 MA. Instead, they use Rogowski coils (air-core toroids around the conductor) or B-dot probes that measure the rate of change of the magnetic field. The current is then calculated from Maxwell's equations. These sensors can respond in nanoseconds and survive the brutal electromagnetic environment.
Gilbert – Frequently Asked Questions
Why is the gilbert approximately 0.7958 amperes and not a round number?
The gilbert equals 10/(4π) amperes because the CGS-EMU system uses a different form of Ampere's law where the factor 4π appears explicitly rather than being absorbed into μ₀. This "unrationalised" form distributes 4π differently in the equations, producing the 1/(4π) factor when converting to SI's "rationalised" system.
What is magnetomotive force and how is it different from regular current?
MMF is the magnetic analogue of voltage — it drives flux through a magnetic circuit the way EMF drives current through an electrical circuit. For a coil, MMF = N × I (turns times current). A 100-turn coil carrying 1 A has 100 ampere-turns of MMF. In CGS, that same MMF would be about 125.7 gilberts.
Who was William Gilbert and why does he deserve a unit?
Gilbert (1544–1603) was physician to Queen Elizabeth I and author of De Magnete (1600), the first true scientific investigation of magnetism. He demonstrated that Earth is a magnet, distinguished magnetic from electrostatic attraction, and coined the word "electricus." He did all this 87 years before Newton's Principia — a genuine pioneer of experimental science.
Where would I find gilberts used today?
Practically nowhere in new designs. You might encounter gilberts in vintage relay and transformer datasheets from the 1940s–1960s, in older American and European magnetic component catalogs, or in classic electrical engineering textbooks. Any modern magnetic circuit analysis uses ampere-turns (A·T) for MMF.
How do I convert gilberts to ampere-turns?
Multiply gilberts by 10/(4π) ≈ 0.7958 to get ampere-turns. Wait — that is backwards. Multiply gilberts by 0.7958 to get amperes for a single-turn coil. For MMF conversion: 1 gilbert = 0.7958 ampere-turns. So a relay spec of 5 Gi needs about 4 ampere-turns to actuate — for instance, 4 turns at 1 A or 8 turns at 0.5 A.