Milliampere to Teraampere volt per ohm
mA
TA V/Ω
Conversion History
| Conversion | Reuse | Delete |
|---|---|---|
| No conversion history to show. | ||
Quick Reference Table (Milliampere to Teraampere volt per ohm)
| Milliampere (mA) | Teraampere volt per ohm (TA V/Ω) |
|---|---|
| 1 | 0.000000000000001 |
| 5 | 0.000000000000005 |
| 20 | 0.00000000000002 |
| 100 | 0.0000000000001 |
| 500 | 0.0000000000005 |
| 1,000 | 0.000000000001 |
| 2,000 | 0.000000000002 |
About Milliampere (mA)
The milliampere (mA) equals one thousandth of an ampere (10⁻³ A) and is the practical unit for most consumer electronics and lighting circuits. USB 2.0 ports supply up to 500 mA; USB-C Power Delivery can reach 5,000 mA (5 A). A standard 5 mm indicator LED operates at 10–20 mA; mid-power LED drivers supply 100–350 mA. Human perception of electric shock begins near 1 mA; currents above 10 mA cause involuntary muscle contraction, and above 100 mA can be lethal. Wireless sensors, earphones, and small motors typically draw single-digit to low-hundreds of milliamperes.
A USB 2.0 port provides up to 500 mA for charging. A standard 5 mm indicator LED operates at around 20 mA.
About Teraampere volt per ohm (TA V/Ω)
The teraampere volt per ohm (TA·V/Ω) equals exactly 10¹² amperes, derived from Ohm s law (I = V/R) with a tera- prefix: (volt)/(ohm) = ampere, scaled by 10¹². No natural or engineered system on Earth produces currents remotely approaching one teraampere; the unit exists as a dimensional expression used in extreme theoretical physics, astrophysics (stellar current sheets, pulsar magnetospheres), and unit-conversion pedagogy. The notation makes Ohm s law dimensionally explicit at an extreme scale and serves as a reminder that SI prefixes can be applied consistently to derived units.
One teraampere would require one teravolt across one ohm — voltages found only near highly magnetised neutron stars. The unit is encountered in astrophysics and theoretical electrodynamics rather than any lab or industrial setting.
Milliampere – Frequently Asked Questions
How many milliamps is dangerous to a human?
The danger thresholds for 50/60 Hz AC are roughly: 1 mA (tingling), 10–20 mA (muscle lock — you cannot let go), 75–100 mA (ventricular fibrillation), and 200+ mA (cardiac arrest and burns). DC is somewhat less dangerous at the same current. Duration matters enormously — 100 mA for 1 second is more lethal than 100 mA for 10 ms.
Why is my phone charger rated in milliamps when it charges at 2 amps?
Battery capacity is rated in milliampere-hours (mAh), not milliamps. A 4,000 mAh battery holds 4,000 mA for one hour (or 2,000 mA for two hours). The charger delivers 2 A (2,000 mA) of current, and it takes about 2 hours to fill that 4,000 mAh battery from empty.
What is the milliamp draw of common household items?
A wireless earbud draws 5–15 mA during playback. A TV remote uses about 10 mA when pressing a button. An LED nightlight consumes 20–50 mA. A smoke detector in standby draws 10–30 μA (0.01–0.03 mA) — so low it runs on a 9V battery for years.
Why do LED specifications always mention 20 mA?
Standard 5 mm indicator LEDs were designed around a 20 mA operating point — bright enough to see clearly, low enough to avoid overheating the tiny die. All datasheet specs (luminous intensity, color, forward voltage) are measured at this "test current." High-power LEDs use 350 mA or 700 mA as their reference instead.
How does milliamp-hour (mAh) relate to milliamp (mA)?
Milliamp-hours measure charge capacity; milliamps measure current flow rate. A 2,000 mAh battery can deliver 2,000 mA for 1 hour, or 200 mA for 10 hours, or 20 mA for 100 hours — current times time equals capacity. Dividing mAh by mA gives approximate runtime in hours.
Teraampere volt per ohm – Frequently Asked Questions
Does anything in the universe carry a teraampere of current?
Possibly. Astrophysical jets from active galactic nuclei are theorised to carry currents of 10¹⁷–10¹⁸ amperes — millions of teraamperes — flowing along magnetic field lines spanning thousands of light-years. Pulsar magnetospheres may sustain teraampere-class currents in their polar regions. On Earth, nothing comes remotely close.
Why write TA·V/Ω instead of just teraampere?
The notation makes the derivation from Ohm's law explicit: I = V/R, scaled by tera. It appears in pedagogical contexts showing that SI prefixes apply consistently to derived expressions, and in astrophysics papers where the V/Ω form reminds readers of the physical relationship producing the current — a voltage driving charge through a resistance.
What voltage would you need to push a teraampere through a wire?
Even through a superconductor (zero DC resistance), you would need enormous energy to establish the magnetic field of a teraampere current. Through a 1 Ω resistor, Ohm's law says you would need 10¹² volts (1 teravolt). The power dissipated would be 10²⁴ watts — about 2.6 million times the Sun's total luminosity. The wire would not survive.
How do astrophysical current sheets reach teraampere scales?
In astrophysical jets and magnetospheres, charged plasma flows along magnetic field lines over enormous cross-sections — millions of square kilometers. Even modest current densities, integrated over these vast areas, yield teraampere total currents. The plasma is the conductor, and the "voltage" comes from the rotating magnetic field of the central object.
Is there any practical unit between megaampere and teraampere?
The gigaampere (GA, 10⁹ A) fills that gap but is almost never used. No terrestrial phenomenon or experiment reaches gigaampere levels. The jump from megaampere (achievable in pulsed-power labs) to teraampere (astrophysical only) reflects a genuine gap in nature — there is simply nothing on Earth that produces currents between 10⁶ and 10⁹ amperes.