Foot pounds-force second to Kilogram-force meters/minute

James Watt calculated that a mill horse could turn a mill wheel 144 times per hour, doing 32,572 ft·lbf of work per minute — he rounded up to 33,000 ft·lbf/min (550 ft·lbf/s) for marketing purposes. He wanted to sell steam engines by comparing them to horses, so he likely overestimated the horse to make his engines look like better value. A real horse sustains closer to 350–500 ft·lbf/s, so Watt's "1 HP" is actually more than one horse.

Power (ft·lbf/s) = Torque (ft·lbf) × RPM × 2π / 60. This is the workhorse formula (pun intended) of US mechanical engineering. For example, an engine producing 200 ft·lbf of torque at 3,000 RPM delivers 200 × 3,000 × 6.2832 / 60 = 62,832 ft·lbf/s ≈ 114 hp. The formula works because angular velocity in rad/s times torque in ft·lbf gives power directly in ft·lbf/s.

Pushing with 1 pound of force at 1 foot per second — roughly the effort of slowly sliding a light book across a table against friction. Lifting a 1-pound weight 1 foot in 1 second. Turning a doorknob with a very light touch. It's about 1.36 watts — enough to dimly light an LED. In human terms, it's almost effortless: casual walking produces about 50–80 ft·lbf/s of mechanical power, and you don't even notice.

Yes, particularly in ballistics (muzzle energy rates), mechanical testing (dynamometer output), agricultural machinery specs, and industrial equipment designed for the US market. However, even in the US, many engineering firms are switching to SI units for international compatibility. The automotive industry increasingly quotes power in both hp and kW. Aerospace has been mostly metric since the 1990s. Ft·lbf/s survives mainly in traditional mechanical and manufacturing industries.

Bullets are rated in ft·lbf of muzzle energy (not per second), but the power of a firearm is the muzzle energy divided by barrel time. A .308 rifle bullet exits with about 2,600 ft·lbf of energy over a barrel transit time of ~0.001 seconds, meaning the instantaneous power is roughly 2,600,000 ft·lbf/s (about 3,500 hp). That's why rifle recoil feels punchy — for a millisecond, you're absorbing the reaction force of a truck engine.

Primarily in older European machinery documentation, Japanese industrial equipment specs (JIS standards historically used kgf), and some South American engineering. Italian and German mechanical engineering textbooks from before the 1980s are full of kgf·m/min calculations. Modern use persists in elevator/lift engineering in some countries, where lifting "X kilograms by Y meters per minute" maps directly to the unit without conversion.

A kilogram-force (kgf) is the weight of 1 kg under standard gravity (9.80665 m/s²) = 9.80665 newtons. A kilogram is a unit of mass, not force. The confusion between mass and weight is exactly why SI purists dislike kgf — it blurs the distinction. On the Moon (1/6 Earth gravity), 1 kg of mass exerts only 0.17 kgf. On Jupiter, the same kilogram exerts 2.53 kgf. The kgf only equals the "weight" of 1 kg at sea level on Earth.

Multiply by 0.1634 (or more precisely, 9.80665/60). So 4,500 kgf·m/min × 0.1634 = 735.5 W = 1 metric horsepower. For quick mental math: divide kgf·m/min by 6 to get a rough wattage (accurate to about 2%). Going backward, multiply watts by 6.12 to get kgf·m/min. A 100 W motor produces about 612 kgf·m/min of mechanical output before efficiency losses.

The kgf system predates the watt by decades. Before electricity made "watts" a household word, mechanical engineers needed a unit that matched their physical intuition: "how many kilograms can this machine lift how many meters in a minute?" It's beautifully concrete — you can picture 100 kg rising 10 meters in one minute (1,000 kgf·m/min ≈ 163 W). The watt, defined electrically, felt abstract to 19th-century mechanical engineers.

A hand-operated winch: 200–800 kgf·m/min. A manual water pump: 100–400 kgf·m/min. Pedalling a bicycle: 500–2,000 kgf·m/min. A hand-cranked flour mill: 300–600 kgf·m/min. These numbers are intuitive: you can feel whether lifting 50 kg by 10 meters in a minute (500 kgf·m/min) is hard work. It is — that's about 82 W of sustained mechanical output, roughly the maximum comfortable effort for untrained people.